/** @file * VBoxGuest - VirtualBox Guest Additions Driver Interface. (ADD,DEV) * * @remarks This is in the process of being split up and usage cleaned up. */ /* * Copyright (C) 2006-2009 Sun Microsystems, Inc. * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. * * The contents of this file may alternatively be used under the terms * of the Common Development and Distribution License Version 1.0 * (CDDL) only, as it comes in the "COPYING.CDDL" file of the * VirtualBox OSE distribution, in which case the provisions of the * CDDL are applicable instead of those of the GPL. * * You may elect to license modified versions of this file under the * terms and conditions of either the GPL or the CDDL or both. * * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa * Clara, CA 95054 USA or visit http://www.sun.com if you need * additional information or have any questions. */ #ifndef ___VBox_VBoxGuest_h #define ___VBox_VBoxGuest_h #include #include #include #include #include /** @defgroup grp_vboxguest VirtualBox Guest Additions Driver Interface * @{ */ /** @todo it would be nice if we could have two define without paths. */ /** @def VBOXGUEST_DEVICE_NAME * The support device name. */ /** @def VBOXGUEST_USER_DEVICE_NAME * The support device name of the user accessible device node. */ #if defined(RT_OS_OS2) # define VBOXGUEST_DEVICE_NAME "\\Dev\\VBoxGst$" #elif defined(RT_OS_WINDOWS) # define VBOXGUEST_DEVICE_NAME "\\\\.\\VBoxGuest" /** The support service name. */ # define VBOXGUEST_SERVICE_NAME "VBoxGuest" /** Global name for Win2k+ */ # define VBOXGUEST_DEVICE_NAME_GLOBAL "\\\\.\\Global\\VBoxGuest" /** Win32 driver name */ # define VBOXGUEST_DEVICE_NAME_NT L"\\Device\\VBoxGuest" /** Device name. */ # define VBOXGUEST_DEVICE_NAME_DOS L"\\DosDevices\\VBoxGuest" #else /* (PORTME) */ # define VBOXGUEST_DEVICE_NAME "/dev/vboxguest" # if defined(RT_OS_LINUX) # define VBOXGUEST_USER_DEVICE_NAME "/dev/vboxuser" # endif #endif #ifndef VBOXGUEST_USER_DEVICE_NAME # define VBOXGUEST_USER_DEVICE_NAME VBOXGUEST_DEVICE_NAME #endif /** Fictive start address of the hypervisor physical memory for MmMapIoSpace. */ #define VBOXGUEST_HYPERVISOR_PHYSICAL_START UINT32_C(0xf8000000) #if !defined(IN_RC) && !defined(IN_RING0_AGNOSTIC) && !defined(IPRT_NO_CRT) /** @name VBoxGuest IOCTL codes and structures. * * The range 0..15 is for basic driver communication. * The range 16..31 is for HGCM communcation. * The range 32..47 is reserved for future use. * The range 48..63 is for OS specific communcation. * The 7th bit is reserved for future hacks. * The 8th bit is reserved for distinguishing between 32-bit and 64-bit * processes in future 64-bit guest additions. * * @remarks When creating new IOCtl interfaces keep in mind that not all OSes supports * reporting back the output size. (This got messed up a little bit in VBoxDrv.) * * The request size is also a little bit tricky as it's passed as part of the * request code on unix. The size field is 14 bits on Linux, 12 bits on *BSD, * 13 bits Darwin, and 8-bits on Solaris. All the BSDs and Darwin kernels * will make use of the size field, while Linux and Solaris will not. We're of * course using the size to validate and/or map/lock the request, so it has * to be valid. * * For Solaris we will have to do something special though, 255 isn't * sufficent for all we need. A 4KB restriction (BSD) is probably not * too problematic (yet) as a general one. * * More info can be found in SUPDRVIOC.h and related sources. * * @remarks If adding interfaces that only has input or only has output, some new macros * needs to be created so the most efficient IOCtl data buffering method can be * used. * @{ */ #ifdef RT_ARCH_AMD64 # define VBOXGUEST_IOCTL_FLAG 128 #elif defined(RT_ARCH_X86) # define VBOXGUEST_IOCTL_FLAG 0 #else # error "dunno which arch this is!" #endif /** Ring-3 request wrapper for big requests. * * This is necessary because the ioctl number scheme on many Unixy OSes (esp. Solaris) * only allows a relatively small size to be encoded into the request. So, for big * request this generic form is used instead. */ typedef struct VBGLBIGREQ { /** Magic value (VBGLBIGREQ_MAGIC). */ uint32_t u32Magic; /** The size of the data buffer. */ uint32_t cbData; /** The user address of the data buffer. */ RTR3PTR pvDataR3; #if HC_ARCH_BITS == 32 uint32_t u32Padding; #endif /** @todo r=bird: We need a 'rc' field for passing VBox status codes. Reused * some input field as rc on output. */ } VBGLBIGREQ; /** Pointer to a request wrapper for solaris guests. */ typedef VBGLBIGREQ *PVBGLBIGREQ; /** Pointer to a const request wrapper for solaris guests. */ typedef const VBGLBIGREQ *PCVBGLBIGREQ; /** The VBGLBIGREQ::u32Magic value (Ryuu Murakami). */ #define VBGLBIGREQ_MAGIC 0x19520219 #if defined(RT_OS_WINDOWS) /* @todo Remove IOCTL_CODE later! Integrate it in VBOXGUEST_IOCTL_CODE below. */ /** @todo r=bird: IOCTL_CODE is supposedly defined in some header included by Windows.h or ntddk.h, which is why it wasn't in the #if 0 earlier. See HostDrivers/Support/SUPDrvIOC.h... */ # define IOCTL_CODE(DeviceType, Function, Method, Access, DataSize_ignored) \ ( ((DeviceType) << 16) | ((Access) << 14) | ((Function) << 2) | (Method)) # define VBOXGUEST_IOCTL_CODE_(Function, Size) IOCTL_CODE(FILE_DEVICE_UNKNOWN, 2048 + (Function), METHOD_BUFFERED, FILE_WRITE_ACCESS, 0) # define VBOXGUEST_IOCTL_STRIP_SIZE_(Code) (Code) #elif defined(RT_OS_OS2) /* No automatic buffering, size not encoded. */ # define VBOXGUEST_IOCTL_CATEGORY 0xc2 # define VBOXGUEST_IOCTL_CODE_(Function, Size) ((unsigned char)(Function)) # define VBOXGUEST_IOCTL_CATEGORY_FAST 0xc3 /**< Also defined in VBoxGuestA-os2.asm. */ # define VBOXGUEST_IOCTL_CODE_FAST_(Function) ((unsigned char)(Function)) # define VBOXGUEST_IOCTL_STRIP_SIZE(Code) (Code) #elif defined(RT_OS_SOLARIS) /* No automatic buffering, size limited to 255 bytes => use VBGLBIGREQ for everything. */ # include # define VBOXGUEST_IOCTL_CODE_(Function, Size) _IOWRN('V', (Function), sizeof(VBGLBIGREQ)) # define VBOXGUEST_IOCTL_CODE_FAST_(Function) _IO( 'V', (Function)) # define VBOXGUEST_IOCTL_STRIP_SIZE(Code) (Code) #elif defined(RT_OS_LINUX) /* No automatic buffering, size limited to 16KB. */ # include # define VBOXGUEST_IOCTL_CODE_(Function, Size) _IOC(_IOC_READ|_IOC_WRITE, 'V', (Function), (Size)) # define VBOXGUEST_IOCTL_CODE_FAST_(Function) _IO( 'V', (Function)) # define VBOXGUEST_IOCTL_STRIP_SIZE(Code) VBOXGUEST_IOCTL_CODE_(_IOC_NR((Code)), 0) #elif defined(RT_OS_FREEBSD) /** @todo r=bird: Please do it like SUPDRVIOC to keep it as similar as possible. */ # include # define VBOXGUEST_IOCTL_CODE_(Function, Size) _IOWR('V', (Function), VBGLBIGREQ) # define VBOXGUEST_IOCTL_CODE_FAST_(Function) _IO( 'V', (Function)) # define VBOXGUEST_IOCTL_STRIP_SIZE(Code) IOCBASECMD(Code) #else /* PORTME */ #endif #define VBOXGUEST_IOCTL_CODE(Function, Size) VBOXGUEST_IOCTL_CODE_((Function) | VBOXGUEST_IOCTL_FLAG, Size) #define VBOXGUEST_IOCTL_CODE_FAST(Function) VBOXGUEST_IOCTL_CODE_FAST_((Function) | VBOXGUEST_IOCTL_FLAG) /* Define 32 bit codes to support 32 bit applications requests in the 64 bit guest driver. */ #ifdef RT_ARCH_AMD64 # define VBOXGUEST_IOCTL_CODE_32(Function, Size) VBOXGUEST_IOCTL_CODE_(Function, Size) # define VBOXGUEST_IOCTL_CODE_FAST_32(Function) VBOXGUEST_IOCTL_CODE_FAST_(Function) #endif /* RT_ARCH_AMD64 */ /** IOCTL to VBoxGuest to query the VMMDev IO port region start. * @remarks Ring-0 only. */ #define VBOXGUEST_IOCTL_GETVMMDEVPORT VBOXGUEST_IOCTL_CODE(1, sizeof(VBoxGuestPortInfo)) #pragma pack(4) typedef struct VBoxGuestPortInfo { uint32_t portAddress; struct VMMDevMemory *pVMMDevMemory; } VBoxGuestPortInfo; /** IOCTL to VBoxGuest to wait for a VMMDev host notification */ #define VBOXGUEST_IOCTL_WAITEVENT VBOXGUEST_IOCTL_CODE_(2, sizeof(VBoxGuestWaitEventInfo)) /** @name Result codes for VBoxGuestWaitEventInfo::u32Result * @{ */ /** Successful completion, an event occured. */ #define VBOXGUEST_WAITEVENT_OK (0) /** Successful completion, timed out. */ #define VBOXGUEST_WAITEVENT_TIMEOUT (1) /** Wait was interrupted. */ #define VBOXGUEST_WAITEVENT_INTERRUPTED (2) /** An error occured while processing the request. */ #define VBOXGUEST_WAITEVENT_ERROR (3) /** @} */ /** Input and output buffers layout of the IOCTL_VBOXGUEST_WAITEVENT */ typedef struct VBoxGuestWaitEventInfo { /** timeout in milliseconds */ uint32_t u32TimeoutIn; /** events to wait for */ uint32_t u32EventMaskIn; /** result code */ uint32_t u32Result; /** events occured */ uint32_t u32EventFlagsOut; } VBoxGuestWaitEventInfo; AssertCompileSize(VBoxGuestWaitEventInfo, 16); /** IOCTL to VBoxGuest to interrupt (cancel) any pending WAITEVENTs and return. * Handled inside the guest additions and not seen by the host at all. * @see VBOXGUEST_IOCTL_WAITEVENT */ #define VBOXGUEST_IOCTL_CANCEL_ALL_WAITEVENTS VBOXGUEST_IOCTL_CODE_(5, 0) /** IOCTL to VBoxGuest to perform a VMM request * @remark The data buffer for this IOCtl has an variable size, keep this in mind * on systems where this matters. */ #define VBOXGUEST_IOCTL_VMMREQUEST(Size) VBOXGUEST_IOCTL_CODE_(3, (Size)) /** IOCTL to VBoxGuest to control event filter mask. */ #define VBOXGUEST_IOCTL_CTL_FILTER_MASK VBOXGUEST_IOCTL_CODE_(4, sizeof(VBoxGuestFilterMaskInfo)) /** Input and output buffer layout of the IOCTL_VBOXGUEST_CTL_FILTER_MASK. */ typedef struct VBoxGuestFilterMaskInfo { uint32_t u32OrMask; uint32_t u32NotMask; } VBoxGuestFilterMaskInfo; AssertCompileSize(VBoxGuestFilterMaskInfo, 8); #pragma pack() /** IOCTL to VBoxGuest to check memory ballooning. * The guest kernel module / device driver will ask the host for the current size of * the balloon and adjust the size. Or it will set fHandledInR0 = false and R3 is * responsible for allocating memory and calling R0 (VBOXGUEST_IOCTL_CHANGE_BALLOON). */ #define VBOXGUEST_IOCTL_CHECK_BALLOON VBOXGUEST_IOCTL_CODE_(7, 100) typedef struct VBoxGuestCheckBalloonInfo { /** the size of the balloon in chunks of 1MB */ uint32_t cBalloonChunks; /** false = handled in R0, no further action required. * true = allocate balloon memory in R3. */ uint32_t fHandleInR3; } VBoxGuestCheckBalloonInfo; AssertCompileSize(VBoxGuestCheckBalloonInfo, 8); /** IOCTL to VBoxGuest to supply or revoke one chunk for ballooning. The guest kernel * module / device driver will lock down supplied memory or unlock reclaimed memory * and then forward the physical addresses of the changed balloon chunk to the host. */ #define VBOXGUEST_IOCTL_CHANGE_BALLOON VBOXGUEST_IOCTL_CODE_(8, sizeof(VBoxGuestChangeBalloonInfo)) /** Information about a memory chunk used to inflate or deflate the balloon. */ typedef struct VBoxGuestChangeBalloonInfo { /** Address of the chunk */ uint64_t u64ChunkAddr; /** true = inflate, false = deflate */ uint32_t fInflate; /** alignment */ uint32_t u32Align; } VBoxGuestChangeBalloonInfo; AssertCompileSize(VBoxGuestChangeBalloonInfo, 16); /** IOCTL to VBoxGuest to perform backdoor logging. * The argument is a string buffer of the specified size. */ #define VBOXGUEST_IOCTL_LOG(Size) VBOXGUEST_IOCTL_CODE_(6, (Size)) #ifdef VBOX_WITH_HGCM /** IOCTL to VBoxGuest to connect to a HGCM service. */ # define VBOXGUEST_IOCTL_HGCM_CONNECT VBOXGUEST_IOCTL_CODE(16, sizeof(VBoxGuestHGCMConnectInfo)) /** IOCTL to VBoxGuest to disconnect from a HGCM service. */ # define VBOXGUEST_IOCTL_HGCM_DISCONNECT VBOXGUEST_IOCTL_CODE(17, sizeof(VBoxGuestHGCMDisconnectInfo)) /** IOCTL to VBoxGuest to make a call to a HGCM service. * @see VBoxGuestHGCMCallInfo */ # define VBOXGUEST_IOCTL_HGCM_CALL(Size) VBOXGUEST_IOCTL_CODE(18, (Size)) /** IOCTL to VBoxGuest to make a timed call to a HGCM service. */ # define VBOXGUEST_IOCTL_HGCM_CALL_TIMED(Size) VBOXGUEST_IOCTL_CODE(20, (Size)) # ifdef RT_ARCH_AMD64 /** @name IOCTL numbers that 32-bit clients, like the Windows OpenGL guest * driver, will use when taking to a 64-bit driver. * @remarks These are only used by the driver implementation! */ # define VBOXGUEST_IOCTL_HGCM_CONNECT_32 VBOXGUEST_IOCTL_CODE_32(16, sizeof(VBoxGuestHGCMConnectInfo)) # define VBOXGUEST_IOCTL_HGCM_DISCONNECT_32 VBOXGUEST_IOCTL_CODE_32(17, sizeof(VBoxGuestHGCMDisconnectInfo)) # define VBOXGUEST_IOCTL_HGCM_CALL_32(Size) VBOXGUEST_IOCTL_CODE_32(18, (Size)) # define VBOXGUEST_IOCTL_HGCM_CALL_TIMED_32(Size) VBOXGUEST_IOCTL_CODE_32(20, (Size)) /** @} */ # endif /* RT_ARCH_AMD64 */ /** Get the pointer to the first HGCM parameter. */ # define VBOXGUEST_HGCM_CALL_PARMS(a) ( (HGCMFunctionParameter *)((uint8_t *)(a) + sizeof(VBoxGuestHGCMCallInfo)) ) /** Get the pointer to the first HGCM parameter in a 32-bit request. */ # define VBOXGUEST_HGCM_CALL_PARMS32(a) ( (HGCMFunctionParameter32 *)((uint8_t *)(a) + sizeof(VBoxGuestHGCMCallInfo)) ) /** IOCTL to VBoxGuest to make a connect to the clipboard service. * @todo Seems this is no longer is use. Try remove it. */ # define VBOXGUEST_IOCTL_CLIPBOARD_CONNECT VBOXGUEST_IOCTL_CODE_(19, sizeof(uint32_t)) #endif /* VBOX_WITH_HGCM */ #ifdef RT_OS_OS2 /** * The data buffer layout for the IDC entry point (AttachDD). * * @remark This is defined in multiple 16-bit headers / sources. * Some places it's called VBGOS2IDC to short things a bit. */ typedef struct VBOXGUESTOS2IDCCONNECT { /** VMMDEV_VERSION. */ uint32_t u32Version; /** Opaque session handle. */ uint32_t u32Session; /** * The 32-bit service entry point. * * @returns VBox status code. * @param u32Session The above session handle. * @param iFunction The requested function. * @param pvData The input/output data buffer. The caller ensures that this * cannot be swapped out, or that it's acceptable to take a * page in fault in the current context. If the request doesn't * take input or produces output, apssing NULL is okay. * @param cbData The size of the data buffer. * @param pcbDataReturned Where to store the amount of data that's returned. * This can be NULL if pvData is NULL. */ DECLCALLBACKMEMBER(int, pfnServiceEP)(uint32_t u32Session, unsigned iFunction, void *pvData, size_t cbData, size_t *pcbDataReturned); /** The 16-bit service entry point for C code (cdecl). * * It's the same as the 32-bit entry point, but the types has * changed to 16-bit equivalents. * * @code * int far cdecl * VBoxGuestOs2IDCService16(uint32_t u32Session, uint16_t iFunction, * void far *fpvData, uint16_t cbData, uint16_t far *pcbDataReturned); * @endcode */ RTFAR16 fpfnServiceEP; /** The 16-bit service entry point for Assembly code (register). * * This is just a wrapper around fpfnServiceEP to simplify calls * from 16-bit assembly code. * * @returns (e)ax: VBox status code; cx: The amount of data returned. * * @param u32Session eax - The above session handle. * @param iFunction dl - The requested function. * @param pvData es:bx - The input/output data buffer. * @param cbData cx - The size of the data buffer. */ RTFAR16 fpfnServiceAsmEP; } VBOXGUESTOS2IDCCONNECT; /** Pointer to VBOXGUESTOS2IDCCONNECT buffer. */ typedef VBOXGUESTOS2IDCCONNECT *PVBOXGUESTOS2IDCCONNECT; /** OS/2 specific: IDC client disconnect request. * * This takes no input and it doesn't return anything. Obviously this * is only recognized if it arrives thru the IDC service EP. */ # define VBOXGUEST_IOCTL_OS2_IDC_DISCONNECT VBOXGUEST_IOCTL_CODE(48, sizeof(uint32_t)) #endif /* RT_OS_OS2 */ /** @} */ #endif /* !defined(IN_RC) && !defined(IN_RING0_AGNOSTIC) && !defined(IPRT_NO_CRT) */ #endif