source: vbox/trunk/doc/manual/fr_FR/SDKRef.xml@ 85704

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd">
<book>
  <bookinfo>
    <title>@VBOX_PRODUCT@<superscript>®</superscript></title>

    <subtitle>Programming Guide and Reference</subtitle>

    <edition>Version @VBOX_VERSION_STRING@</edition>

    <corpauthor>@VBOX_VENDOR@</corpauthor>

    <address>http://www.virtualbox.org</address>

    <copyright>
      <year>2004-@VBOX_C_YEAR@</year>

      <holder>@VBOX_VENDOR@</holder>
    </copyright>
  </bookinfo>

  <chapter>
    <title>Introduction</title>

    <para>VirtualBox comes with comprehensive support for third-party
    developers. This Software Development Kit (SDK) contains all the
    documentation and interface files that are needed to write code that
    interacts with VirtualBox.</para>

    <sect1>
      <title>Modularity: the building blocks of VirtualBox</title>

      <para>VirtualBox is cleanly separated into several layers, which can be
      visualized like in the picture below:</para>

      <mediaobject>
        <imageobject>
          <imagedata align="center" fileref="images/vbox-components.png"
                     width="12cm" />
        </imageobject>
      </mediaobject>

      <para>The orange area represents code that runs in kernel mode, the blue
      area represents userspace code.</para>

      <para>At the bottom of the stack resides the hypervisor -- the core of
      the virtualization engine, controlling execution of the virtual machines
      and making sure they do not conflict with each other or whatever the
      host computer is doing otherwise.</para>

      <para>On top of the hypervisor, additional internal modules provide
      extra functionality. For example, the RDP server, which can deliver the
      graphical output of a VM remotely to an RDP client, is a separate module
      that is only loosely tacked into the virtual graphics device. Live
      Migration and Resource Monitor are additional modules currently in the
      process of being added to VirtualBox.</para>

      <para>What is primarily of interest for purposes of the SDK is the API
      layer block that sits on top of all the previously mentioned blocks.
      This API, which we call the <emphasis role="bold">"Main API"</emphasis>,
      exposes the entire feature set of the virtualization engine below. It is
      completely documented in this SDK Reference -- see <xref
      linkend="sdkref_classes" /> and <xref linkend="sdkref_enums" /> -- and
      available to anyone who wishes to control VirtualBox programmatically.
      We chose the name "Main API" to differentiate it from other programming
      interfaces of VirtualBox that may be publicly accessible.</para>

      <para>With the Main API, you can create, configure, start, stop and
      delete virtual machines, retrieve performance statistics about running
      VMs, configure the VirtualBox installation in general, and more. In
      fact, internally, the front-end programs
      <computeroutput>VirtualBox</computeroutput> and
      <computeroutput>VBoxManage</computeroutput> use nothing but this API as
      well -- there are no hidden backdoors into the virtualization engine for
      our own front-ends. This ensures the entire Main API is both
      well-documented and well-tested. (The same applies to
      <computeroutput>VBoxHeadless</computeroutput>, which is not shown in the
      image.)</para>
    </sect1>

    <sect1 id="webservice-or-com">
      <title>Two guises of the same "Main API": the web service or
      COM/XPCOM</title>

      <para>There are several ways in which the Main API can be called by
      other code:<orderedlist>
          <listitem>
            <para>VirtualBox comes with a <emphasis role="bold">web
            service</emphasis> that maps nearly the entire Main API. The web
            service ships in a stand-alone executable
            (<computeroutput>vboxwebsrv</computeroutput>) that, when running,
            acts as an HTTP server, accepts SOAP connections and processes
            them.</para>

            <para>Since the entire web service API is publicly described in a
            web service description file (in WSDL format), you can write
            client programs that call the web service in any language with a
            toolkit that understands WSDL. These days, that includes most
            programming languages that are available: Java, C++, .NET, PHP,
            Python, Perl and probably many more.</para>

            <para>All of this is explained in detail in subsequent chapters of
            this book.</para>

            <para>There are two ways in which you can write client code that
            uses the web service:<orderedlist>
                <listitem>
                  <para>For Java as well as Python, the SDK contains
                  easy-to-use classes that allow you to use the web service in
                  an object-oriented, straightforward manner. We shall refer
                  to this as the <emphasis role="bold">"object-oriented web
                  service (OOWS)"</emphasis>.</para>

                  <para>The OO bindings for Java are described in <xref
                  linkend="javaapi" />, those for Python in <xref lang=""
                  linkend="glue-python-ws" />.</para>
                </listitem>

                <listitem>
                  <para>Alternatively, you can use the web service directly,
                  without the object-oriented client layer. We shall refer to
                  this as the <emphasis role="bold">"raw web
                  service"</emphasis>.</para>

                  <para>You will then have neither native object orientation
                  nor full type safety, since web services are neither
                  object-oriented nor stateful. However, in this way, you can
                  write client code even in languages for which we do not ship
                  object-oriented client code; all you need is a programming
                  language with a toolkit that can parse WSDL and generate
                  client wrapper code from it.</para>

                  <para>We describe this further in <xref
                  linkend="raw-webservice" />, with samples for Java and
                  Perl.</para>
                </listitem>
              </orderedlist></para>
          </listitem>

          <listitem>
            <para>Internally, for portability and easier maintenance, the Main
            API is implemented using the <emphasis role="bold">Component
            Object Model (COM),</emphasis> an interprocess mechanism for
            software components originally introduced by Microsoft for
            Microsoft Windows. On a Windows host, VirtualBox will use
            Microsoft COM; on other hosts where COM is not present, it ships
            with XPCOM, a free software implementation of COM originally
            created by the Mozilla project for their browsers.</para>

            <para>So, if you are familiar with COM and the C++ programming
            language (or with any other programming language that can handle
            COM/XPCOM objects, such as Java, Visual Basic or C#), then you can
            use the COM/XPCOM API directly. VirtualBox comes with all
            necessary files and documentation to build fully functional COM
            applications. For an introduction, please see <xref
            linkend="api_com" /> below.</para>

            <para>The VirtualBox front-ends (the graphical user interfaces as
            well as the command line), which are all written in C++, use
            COM/XPCOM to call the Main API. Technically, the web service is
            another front-end to this COM API, mapping almost all of it to
            SOAP clients.</para>
          </listitem>
        </orderedlist></para>

      <para>If you wonder which way to choose, here are a few
      comparisons:<table>
          <title>Comparison web service vs. COM/XPCOM</title>

          <tgroup cols="2">
            <tbody>
              <row>
                <entry><emphasis role="bold">Web service</emphasis></entry>

                <entry><emphasis role="bold">COM/XPCOM</emphasis></entry>
              </row>

              <row>
                <entry><emphasis role="bold">Pro:</emphasis> Easy to use with
                Java and Python with the object-oriented web service;
                extensive support even with other languages (C++, .NET, PHP,
                Perl and others)</entry>

                <entry><emphasis role="bold">Con:</emphasis> Usable from
                languages where COM bridge available (most languages on
                Windows platform, Python and C++ on other hosts)</entry>
              </row>

              <row>
                <entry><emphasis role="bold">Pro:</emphasis> Client can be on
                remote machine</entry>

                <entry><emphasis role="bold">Con: </emphasis>Client must be on
                the same host where virtual machine is executed</entry>
              </row>

              <row>
                <entry><emphasis role="bold">Con: </emphasis>Significant
                overhead due to XML marshalling over the wire for each method
                call</entry>

                <entry><emphasis role="bold">Pro: </emphasis>Relatively low
                invocation overhead</entry>
              </row>
            </tbody>
          </tgroup>
        </table></para>

      <para>In the following chapters, we will describe the different ways in
      which to program VirtualBox, starting with the method that is easiest to
      use and then increase complexity as we go along.</para>
    </sect1>

    <sect1 id="api_soap_intro">
      <title>About web services in general</title>

      <para>Web services are a particular type of programming interface.
      Whereas, with "normal" programming, a program calls an application
      programming interface (API) defined by another program or the operating
      system and both sides of the interface have to agree on the calling
      convention and, in most cases, use the same programming language, web
      services use Internet standards such as HTTP and XML to
      communicate.<footnote>
          <para>In some ways, web services promise to deliver the same thing
          as CORBA and DCOM did years ago. However, while these previous
          technologies relied on specific binary protocols and thus proved to
          be difficult to use between diverging platforms, web services
          circumvent these incompatibilities by using text-only standards like
          HTTP and XML. On the downside (and, one could say, typical of things
          related to XML), a lot of standards are involved before a web
          service can be implemented. Many of the standards invented around
          XML are used one way or another. As a result, web services are slow
          and verbose, and the details can be incredibly messy. The relevant
          standards here are called SOAP and WSDL, where SOAP describes the
          format of the messages that are exchanged (an XML document wrapped
          in an HTTP header), and WSDL is an XML format that describes a
          complete API provided by a web service. WSDL in turn uses XML Schema
          to describe types, which is not exactly terse either. However, as
          you will see from the samples provided in this chapter, the
          VirtualBox web service shields you from these details and is easy to
          use.</para>
        </footnote></para>

      <para>In order to successfully use a web service, a number of things are
      required -- primarily, a web service accepting connections; service
      descriptions; and then a client that connects to that web service. The
      connections are governed by the SOAP standard, which describes how
      messages are to be exchanged between a service and its clients; the
      service descriptions are governed by WSDL.</para>

      <para>In the case of VirtualBox, this translates into the following
      three components:<orderedlist>
          <listitem>
            <para>The VirtualBox web service (the "server"): this is the
            <computeroutput>vboxwebsrv</computeroutput> executable shipped
            with VirtualBox. Once you start this executable (which acts as a
            HTTP server on a specific TCP/IP port), clients can connect to the
            web service and thus control a VirtualBox installation.</para>
          </listitem>

          <listitem>
            <para>VirtualBox also comes with WSDL files that describe the
            services provided by the web service. You can find these files in
            the <computeroutput>sdk/bindings/webservice/</computeroutput>
            directory. These files are understood by the web service toolkits
            that are shipped with most programming languages and enable you to
            easily access a web service even if you don't use our
            object-oriented client layers. VirtualBox is shipped with
            pregenerated web service glue code for several languages (Python,
            Perl, Java).</para>
          </listitem>

          <listitem>
            <para>A client that connects to the web service in order to
            control the VirtualBox installation.</para>

            <para>Unless you play with some of the samples shipped with
            VirtualBox, this needs to be written by you.</para>
          </listitem>
        </orderedlist></para>
    </sect1>

    <sect1 id="runvboxwebsrv">
      <title>Running the web service</title>

      <para>The web service ships in an stand-alone executable,
      <computeroutput>vboxwebsrv</computeroutput>, that, when running, acts as
      a HTTP server, accepts SOAP connections and processes them -- remotely
      or from the same machine.<note>
          <para>The web service executable is not contained with the
          VirtualBox SDK, but instead ships with the standard VirtualBox
          binary package for your specific platform. Since the SDK contains
          only platform-independent text files and documentation, the binaries
          are instead shipped with the platform-specific packages. For this
          reason the information how to run it as a service is included in the
          VirtualBox documentation.</para>
        </note></para>

      <para>The <computeroutput>vboxwebsrv</computeroutput> program, which
      implements the web service, is a text-mode (console) program which,
      after being started, simply runs until it is interrupted with Ctrl-C or
      a kill command.</para>

      <para>Once the web service is started, it acts as a front-end to the
      VirtualBox installation of the user account that it is running under. In
      other words, if the web service is run under the user account of
      <computeroutput>user1</computeroutput>, it will see and manipulate the
      virtual machines and other data represented by the VirtualBox data of
      that user (for example, on a Linux machine, under
      <computeroutput>/home/user1/.VirtualBox</computeroutput>; see the
      VirtualBox User Manual for details on where this data is stored).</para>

      <sect2 id="vboxwebsrv-ref">
        <title>Command line options of vboxwebsrv</title>

        <para>The web service supports the following command line
        options:</para>

        <itemizedlist>
          <listitem>
            <para><computeroutput>--help</computeroutput> (or
            <computeroutput>-h</computeroutput>): print a brief summary of
            command line options.</para>
          </listitem>

          <listitem>
            <para><computeroutput>--background</computeroutput> (or
            <computeroutput>-b</computeroutput>): run the web service as a
            background daemon. This option is not supported on Windows
            hosts.</para>
          </listitem>

          <listitem>
            <para><computeroutput>--host</computeroutput> (or
            <computeroutput>-H</computeroutput>): This specifies the host to
            bind to and defaults to "localhost".</para>
          </listitem>

          <listitem>
            <para><computeroutput>--port</computeroutput> (or
            <computeroutput>-p</computeroutput>): This specifies which port to
            bind to on the host and defaults to 18083.</para>
          </listitem>

          <listitem>
            <para><computeroutput>--ssl</computeroutput> (or
            <computeroutput>-s</computeroutput>): This enables SSL support.</para>
          </listitem>

          <listitem>
            <para><computeroutput>--keyfile</computeroutput> (or
            <computeroutput>-K</computeroutput>): This specifies the file name
            containing the server private key and the certificate. This is a
            mandatory parameter if SSL is enabled.</para>
          </listitem>

          <listitem>
            <para><computeroutput>--passwordfile</computeroutput> (or
            <computeroutput>-a</computeroutput>): This specifies the file name
            containing the password for the server private key. If unspecified
            or an empty string is specified this is interpreted as an empty
            password (i.e. the private key is not protected by a password). If
            the file name <computeroutput>-</computeroutput> is specified then
            then the password is read from the standard input stream, otherwise
            from the specified file. The user is responsible for appropriate
            access rights to protect the confidential password.</para>
          </listitem>

          <listitem>
            <para><computeroutput>--cacert</computeroutput> (or
            <computeroutput>-c</computeroutput>): This specifies the file name
            containing the CA certificate appropriate for the server
            certificate.</para>
          </listitem>

          <listitem>
            <para><computeroutput>--capath</computeroutput> (or
            <computeroutput>-C</computeroutput>): This specifies the directory
            containing several CA certificates appropriate for the server
            certificate.</para>
          </listitem>

          <listitem>
            <para><computeroutput>--dhfile</computeroutput> (or
            <computeroutput>-D</computeroutput>): This specifies the file name
            containing the DH key. Alternatively it can contain the number of
            bits of the DH key to generate. If left empty, RSA is used.</para>
          </listitem>

          <listitem>
            <para><computeroutput>--randfile</computeroutput> (or
            <computeroutput>-r</computeroutput>): This specifies the file name
            containing the seed for the random number generator. If left empty,
            an operating system specific source of the seed.</para>
          </listitem>

          <listitem>
            <para><computeroutput>--timeout</computeroutput> (or
            <computeroutput>-t</computeroutput>): This specifies the session
            timeout, in seconds, and defaults to 300 (five minutes). A web
            service client that has logged on but makes no calls to the web
            service will automatically be disconnected after the number of
            seconds specified here, as if it had called the
            <computeroutput>IWebSessionManager::logoff()</computeroutput>
            method provided by the web service itself.</para>

            <para>It is normally vital that each web service client call this
            method, as the web service can accumulate large amounts of memory
            when running, especially if a web service client does not properly
            release managed object references. As a result, this timeout value
            should not be set too high, especially on machines with a high
            load on the web service, or the web service may eventually deny
            service.</para>
          </listitem>

          <listitem>
            <para><computeroutput>--check-interval</computeroutput> (or
            <computeroutput>-i</computeroutput>): This specifies the interval
            in which the web service checks for timed-out clients, in seconds,
            and defaults to 5. This normally does not need to be
            changed.</para>
          </listitem>

          <listitem>
            <para><computeroutput>--threads</computeroutput> (or
            <computeroutput>-T</computeroutput>): This specifies the maximum
            number or worker threads, and defaults to 100. This normally does
            not need to be changed.</para>
          </listitem>

          <listitem>
            <para><computeroutput>--keepalive</computeroutput> (or
            <computeroutput>-k</computeroutput>): This specifies the maximum
            number of requests which can be sent in one web service connection,
            and defaults to 100. This normally does not need to be changed.</para>
          </listitem>

          <listitem>
            <para><computeroutput>--authentication</computeroutput> (or
            <computeroutput>-A</computeroutput>): This specifies the desired
            web service authentication method. If the parameter is not
            specified or the empty string is specified it does not change the
            authentication method, otherwise it is set to the specified value.
            Using this parameter is a good measure against accidental
            misconfiguration, as the web service ensures periodically that it
            isn't changed.</para>
          </listitem>

          <listitem>
            <para><computeroutput>--verbose</computeroutput> (or
            <computeroutput>-v</computeroutput>): Normally, the web service
            outputs only brief messages to the console each time a request is
            served. With this option, the web service prints much more detailed
            data about every request and the COM methods that those requests
            are mapped to internally, which can be useful for debugging client
            programs.</para>
          </listitem>

          <listitem>
            <para><computeroutput>--pidfile</computeroutput> (or
            <computeroutput>-P</computeroutput>): Name of the PID file which is
            created when the daemon was started.</para>
          </listitem>

          <listitem>
            <para><computeroutput>--logfile</computeroutput> (or
            <computeroutput>-F</computeroutput>)
            <computeroutput>&lt;file&gt;</computeroutput>: If this is
            specified, the web service not only prints its output to the
            console, but also writes it to the specified file. The file is
            created if it does not exist; if it does exist, new output is
            appended to it. This is useful if you run the web service
            unattended and need to debug problems after they have
            occurred.</para>
          </listitem>

          <listitem>
            <para><computeroutput>--logrotate</computeroutput> (or
            <computeroutput>-R</computeroutput>): Number of old log files to
            keep, defaults to 10. Log rotation is disabled if set to 0.</para>
          </listitem>

          <listitem>
            <para><computeroutput>--logsize</computeroutput> (or
            <computeroutput>-S</computeroutput>): Maximum size of log file in
            bytes, defaults to 100MB. Log rotation is triggered if the file
            grows beyond this limit.</para>
          </listitem>

          <listitem>
            <para><computeroutput>--loginterval</computeroutput> (or
            <computeroutput>-I</computeroutput>): Maximum time interval to be
            put in a log file before rotation is triggered, in seconds, and
            defaults to one day.</para>
          </listitem>
        </itemizedlist>
      </sect2>

      <sect2 id="websrv_authenticate">
        <title>Authenticating at web service logon</title>

        <para>As opposed to the COM/XPCOM variant of the Main API, a client
        that wants to use the web service must first log on by calling the
        <computeroutput>IWebsessionManager::logon()</computeroutput> API (see
        <xref linkend="IWebsessionManager__logon" />) that is specific to the
        web service. Logon is necessary for the web service to be stateful;
        internally, it maintains a session for each client that connects to
        it.</para>

        <para>The <computeroutput>IWebsessionManager::logon()</computeroutput>
        API takes a user name and a password as arguments, which the web
        service then passes to a customizable authentication plugin that
        performs the actual authentication.</para>

        <para>For testing purposes, it is recommended that you first disable
        authentication with this command:<screen>VBoxManage setproperty websrvauthlibrary null</screen></para>

        <para><warning>
            <para>This will cause all logons to succeed, regardless of user
            name or password. This should of course not be used in a
            production environment.</para>
          </warning>Generally, the mechanism by which clients are
        authenticated is configurable by way of the
        <computeroutput>VBoxManage</computeroutput> command:</para>

        <para><screen>VBoxManage setproperty websrvauthlibrary default|null|&lt;library&gt;</screen></para>

        <para>This way you can specify any shared object/dynamic link module
        that conforms with the specifications for VirtualBox external
        authentication modules as laid out in section <emphasis
        role="bold">VRDE authentication</emphasis> of the VirtualBox User
        Manual; the web service uses the same kind of modules as the
        VirtualBox VRDE server. For technical details on VirtualBox external
        authentication modules see <xref linkend="vbox-auth" /></para>

        <para>By default, after installation, the web service uses the
        VBoxAuth module that ships with VirtualBox. This module uses PAM on
        Linux hosts to authenticate users. Any valid username/password
        combination is accepted, it does not have to be the username and
        password of the user running the web service daemon. Unless
        <computeroutput>vboxwebsrv</computeroutput> runs as root, PAM
        authentication can fail, because sometimes the file
        <computeroutput>/etc/shadow</computeroutput>, which is used by PAM, is
        not readable. On most Linux distribution PAM uses a suid root helper
        internally, so make sure you test this before deploying it. One can
        override this behavior by setting the environment variable
        <computeroutput>VBOX_PAM_ALLOW_INACTIVE</computeroutput> which will
        suppress failures when unable to read the shadow password file. Please
        use this variable carefully, and only if you fully understand what
        you're doing.</para>
      </sect2>
    </sect1>
  </chapter>

  <chapter>
    <title>Environment-specific notes</title>

    <para>The Main API described in <xref linkend="sdkref_classes" /> and
    <xref linkend="sdkref_enums" /> is mostly identical in all the supported
    programming environments which have been briefly mentioned in the
    introduction of this book. As a result, the Main API's general concepts
    described in <xref linkend="concepts" /> are the same whether you use the
    object-oriented web service (OOWS) for JAX-WS or a raw web service
    connection via, say, Perl, or whether you use C++ COM bindings.</para>

    <para>Some things are different depending on your environment, however.
    These differences are explained in this chapter.</para>

    <sect1 id="glue">
      <title>Using the object-oriented web service (OOWS)</title>

      <para>As explained in <xref linkend="webservice-or-com" />, VirtualBox
      ships with client-side libraries for Java, Python and PHP that allow you
      to use the VirtualBox web service in an intuitive, object-oriented way.
      These libraries shield you from the client-side complications of managed
      object references and other implementation details that come with the
      VirtualBox web service. (If you are interested in these complications,
      have a look at <xref linkend="raw-webservice" />).</para>

      <para>We recommend that you start your experiments with the VirtualBox
      web service by using our object-oriented client libraries for JAX-WS, a
      web service toolkit for Java, which enables you to write code to
      interact with VirtualBox in the simplest manner possible.</para>

      <para>As "interfaces", "attributes" and "methods" are COM concepts,
      please read the documentation in <xref linkend="sdkref_classes" /> and
      <xref linkend="sdkref_enums" /> with the following notes in mind.</para>

      <para>The OOWS bindings attempt to map the Main API as closely as
      possible to the Java, Python and PHP languages. In other words, objects
      are objects, interfaces become classes, and you can call methods on
      objects as you would on local objects.</para>

      <para>The main difference remains with attributes: to read an attribute,
      call a "getXXX" method, with "XXX" being the attribute name with a
      capitalized first letter. So when the Main API Reference says that
      <computeroutput>IMachine</computeroutput> has a "name" attribute (see
      <xref linkend="IMachine__name" xreflabel="IMachine::name" />), call
      <computeroutput>getName()</computeroutput> on an IMachine object to
      obtain a machine's name. Unless the attribute is marked as read-only in
      the documentation, there will also be a corresponding "set"
      method.</para>

      <sect2 id="glue-jax-ws">
        <title>The object-oriented web service for JAX-WS</title>

        <para>JAX-WS is a powerful toolkit by Sun Microsystems to build both
        server and client code with Java. It is part of Java 6 (JDK 1.6), but
        can also be obtained separately for Java 5 (JDK 1.5). The VirtualBox
        SDK comes with precompiled OOWS bindings working with both Java 5 and
        6.</para>

        <para>The following sections explain how to get the JAX-WS sample code
        running and explain a few common practices when using the JAX-WS
        object-oriented web service.</para>

        <sect3>
          <title>Preparations</title>

          <para>Since JAX-WS is already integrated into Java 6, no additional
          preparations are needed for Java 6.</para>

          <para>If you are using Java 5 (JDK 1.5.x), you will first need to
          download and install an external JAX-WS implementation, as Java 5
          does not support JAX-WS out of the box; for example, you can
          download one from here: <ulink
          url="https://jax-ws.dev.java.net/2.1.4/JAXWS2.1.4-20080502.jar">https://jax-ws.dev.java.net/2.1.4/JAXWS2.1.4-20080502.jar</ulink>.
          Then perform the installation (<computeroutput>java -jar
          JAXWS2.1.4-20080502.jar</computeroutput>).</para>
        </sect3>

        <sect3>
          <title>Getting started: running the sample code</title>

          <para>To run the OOWS for JAX-WS samples that we ship with the SDK,
          perform the following steps: <orderedlist>
              <listitem>
                <para>Open a terminal and change to the directory where the
                JAX-WS samples reside.<footnote>
                    <para>In
                    <computeroutput>sdk/bindings/glue/java/</computeroutput>.</para>
                  </footnote> Examine the header of
                <computeroutput>Makefile</computeroutput> to see if the
                supplied variables (Java compiler, Java executable) and a few
                other details match your system settings.</para>
              </listitem>

              <listitem>
                <para>To start the VirtualBox web service, open a second
                terminal and change to the directory where the VirtualBox
                executables are located. Then type:<screen>./vboxwebsrv -v</screen></para>

                <para>The web service now waits for connections and will run
                until you press Ctrl+C in this second terminal. The -v
                argument causes it to log all connections to the terminal.
                (See <xref linkend="runvboxwebsrv" os="" /> for details on how
                to run the web service.)</para>
              </listitem>

              <listitem>
                <para>Back in the first terminal and still in the samples
                directory, to start a simple client example just type:<screen>make run16</screen></para>

                <para>if you're on a Java 6 system; on a Java 5 system, run
                <computeroutput>make run15</computeroutput> instead.</para>

                <para>This should work on all Unix-like systems such as Linux
                and Solaris. For Windows systems, use commands similar to what
                is used in the Makefile.</para>

                <para>This will compile the
                <computeroutput>clienttest.java</computeroutput> code on the
                first call and then execute the resulting
                <computeroutput>clienttest</computeroutput> class to show the
                locally installed VMs (see below).</para>
              </listitem>
            </orderedlist></para>

          <para>The <computeroutput>clienttest</computeroutput> sample
          imitates a few typical command line tasks that
          <computeroutput>VBoxManage</computeroutput>, VirtualBox's regular
          command-line front-end, would provide (see the VirtualBox User
          Manual for details). In particular, you can run:<itemizedlist>
              <listitem>
                <para><computeroutput>java clienttest show
                vms</computeroutput>: show the virtual machines that are
                registered locally.</para>
              </listitem>

              <listitem>
                <para><computeroutput>java clienttest list
                hostinfo</computeroutput>: show various information about the
                host this VirtualBox installation runs on.</para>
              </listitem>

              <listitem>
                <para><computeroutput>java clienttest startvm
                &lt;vmname|uuid&gt;</computeroutput>: start the given virtual
                machine.</para>
              </listitem>
            </itemizedlist></para>

          <para>The <computeroutput>clienttest.java</computeroutput> sample
          code illustrates common basic practices how to use the VirtualBox
          OOWS for JAX-WS, which we will explain in more detail in the
          following chapters.</para>
        </sect3>

        <sect3>
          <title>Logging on to the web service</title>

          <para>Before a web service client can do anything useful, two
          objects need to be created, as can be seen in the
          <computeroutput>clienttest</computeroutput> constructor:<orderedlist>
              <listitem>
                <para>An instance of <xref linkend="IWebsessionManager"
                xreflabel="IWebsessionManager" />, which is an interface
                provided by the web service to manage "web sessions" -- that
                is, stateful connections to the web service with persistent
                objects upon which methods can be invoked.</para>

                <para>In the OOWS for JAX-WS, the IWebsessionManager class
                must be constructed explicitly, and a URL must be provided in
                the constructor that specifies where the web service (the
                server) awaits connections. The code in
                <computeroutput>clienttest.java</computeroutput> connects to
                "http://localhost:18083/", which is the default.</para>

                <para>The port number, by default 18083, must match the port
                number given to the
                <computeroutput>vboxwebsrv</computeroutput> command line; see
                <xref linkend="vboxwebsrv-ref" />.</para>
              </listitem>

              <listitem>
                <para>After that, the code calls <xref
                linkend="IWebsessionManager__logon"
                xreflabel="IWebsessionManager::logon()" />, which is the first
                call that actually communicates with the server. This
                authenticates the client with the web service and returns an
                instance of <xref linkend="IVirtualBox"
                xreflabel="IVirtualBox" />, the most fundamental interface of
                the VirtualBox web service, from which all other functionality
                can be derived.</para>

                <para>If logon doesn't work, please take another look at <xref
                linkend="websrv_authenticate" />.</para>
              </listitem>
            </orderedlist></para>
        </sect3>

        <sect3>
          <title>Object management</title>

          <para>The current OOWS for JAX-WS has certain memory management
          related limitations. When you no longer need an object, call its
          <xref linkend="IManagedObjectRef__release"
          xreflabel="IManagedObjectRef::release()" /> method explicitly, which
          frees appropriate managed reference, as is required by the raw
          web service; see <xref linkend="managed-object-references" /> for
          details. This limitation may be reconsidered in a future version of
          the VirtualBox SDK.</para>
        </sect3>
      </sect2>

      <sect2 id="glue-python-ws">
        <title>The object-oriented web service for Python</title>

        <para>VirtualBox comes with two flavors of a Python API: one for web
        service, discussed here, and one for the COM/XPCOM API discussed in
        <xref linkend="pycom" />. The client code is mostly similar, except
        for the initialization part, so it is up to the application developer
        to choose the appropriate technology. Moreover, a common Python glue
        layer exists, abstracting out concrete platform access details, see
        <xref linkend="glue-python" />.</para>

        <para>As indicated in <xref linkend="webservice-or-com" />, the
        COM/XPCOM API gives better performance without the SOAP overhead, and
        does not require a web server to be running. On the other hand, the
        COM/XPCOM Python API requires a suitable Python bridge for your Python
        installation (VirtualBox ships the most important ones for each
        platform<footnote>
            <para>On On Mac OS X only the Python versions bundled with the OS
            are officially supported. This means Python 2.3 for 10.4, Python
            2.5 for 10.5 and Python 2.5 and 2.6 for 10.6.</para>
          </footnote>). On Windows, you can use the Main API from Python if the Win32 extensions
          package for Python<footnote>
            <para>See <ulink
            url="http://sourceforge.net/project/showfiles.php?group_id=78018">http://sourceforge.net/project/showfiles.php?group_id=78018</ulink>.</para>
          </footnote> is installed. Version of Python Win32 extensions earlier than 2.16 are known to have bugs,
          leading to issues with VirtualBox Python bindings, and also some early builds of Python 2.5 for Windows have issues with
          reporting platform name on some Windows versions, so please make sure to use latest available Python
          and Win32 extensions.</para>

        <para>The VirtualBox OOWS for Python relies on the Python ZSI SOAP
        implementation (see <ulink
        url="http://pywebsvcs.sourceforge.net/zsi.html">http://pywebsvcs.sourceforge.net/zsi.html</ulink>),
        which you will need to install locally before trying the examples.
        Most Linux distributions come with package for ZSI, such as
        <computeroutput>python-zsi</computeroutput> in Ubuntu.</para>

        <para>To get started, open a terminal and change to the
        <computeroutput>bindings/glue/python/sample</computeroutput>
        directory, which contains an example of a simple interactive shell
        able to control a VirtualBox instance. The shell is written using the
        API layer, thereby hiding different implementation details, so it is
        actually an example of code share among XPCOM, MSCOM and web services.
        If you are interested in how to interact with the web services layer
        directly, have a look at
        <computeroutput>install/vboxapi/__init__.py</computeroutput> which
        contains the glue layer for all target platforms (i.e. XPCOM, MSCOM
        and web services).</para>

        <para>To start the shell, perform the following commands: <screen>/opt/VirtualBox/vboxwebsrv -t 0
            # start web service with object autocollection disabled
export VBOX_PROGRAM_PATH=/opt/VirtualBox
            # your VirtualBox installation directory
export VBOX_SDK_PATH=/home/youruser/vbox-sdk
            # where you've extracted the SDK
./vboxshell.py -w        </screen>See <xref linkend="vboxshell" /> for more
        details on the shell's functionality. For you, as a VirtualBox
        application developer, the vboxshell sample could be interesting as an
        example of how to write code targeting both local and remote cases
        (COM/XPCOM and SOAP). The common part of the shell is the same -- the
        only difference is how it interacts with the invocation layer. You can
        use the <computeroutput>connect</computeroutput> shell command to
        connect to remote VirtualBox servers; in this case you can skip
        starting the local web server.</para>
      </sect2>

      <sect2>
        <title>The object-oriented web service for PHP</title>

        <para>VirtualBox also comes with object-oriented web service (OOWS)
        wrappers for PHP5. These wrappers rely on the PHP SOAP
        Extension<footnote>
            <para>See <ulink url="???">http://www.php.net/soap</ulink>.</para>
          </footnote>, which can be installed by configuring PHP with
        <computeroutput>--enable-soap</computeroutput>.</para>
      </sect2>
    </sect1>

    <sect1 id="raw-webservice">
      <title>Using the raw web service with any language</title>

      <para>The following examples show you how to use the raw web service,
      without the object-oriented client-side code that was described in the
      previous chapter.</para>

      <para>Generally, when reading the documentation in <xref
      linkend="sdkref_classes" /> and <xref linkend="sdkref_enums" />, due to
      the limitations of SOAP and WSDL lined out in <xref
      linkend="rawws-conventions" />, please have the following notes in
      mind:</para>

      <para><orderedlist>
          <listitem>
            <para>Any COM method call becomes a <emphasis role="bold">plain
            function call</emphasis> in the raw web service, with the object
            as an additional first parameter (before the "real" parameters
            listed in the documentation). So when the documentation says that
            the <computeroutput>IVirtualBox</computeroutput> interface
            supports the <computeroutput>createMachine()</computeroutput>
            method (see <xref linkend="IVirtualBox__createMachine"
            xreflabel="IVirtualBox::createMachine()" />), the web service
            operation is
            <computeroutput>IVirtualBox_createMachine(...)</computeroutput>,
            and a managed object reference to an
            <computeroutput>IVirtualBox</computeroutput> object must be passed
            as the first argument.</para>
          </listitem>

          <listitem>
            <para>For <emphasis role="bold">attributes</emphasis> in
            interfaces, there will be at least one "get" function; there will
            also be a "set" function, unless the attribute is "readonly". The
            attribute name will be appended to the "get" or "set" prefix, with
            a capitalized first letter. So, the "version" readonly attribute
            of the <computeroutput>IVirtualBox</computeroutput> interface can
            be retrieved by calling
            <computeroutput>IVirtualBox_getVersion(vbox)</computeroutput>,
            with <computeroutput>vbox</computeroutput> being the VirtualBox
            object.</para>
          </listitem>

          <listitem>
            <para>Whenever the API documentation says that a method (or an
            attribute getter) returns an <emphasis
            role="bold">object</emphasis>, it will returned a managed object
            reference in the web service instead. As said above, managed
            object references should be released if the web service client
            does not log off again immediately!</para>
          </listitem>
        </orderedlist></para>

      <para></para>

      <sect2 id="webservice-java-sample">
        <title>Raw web service example for Java with Axis</title>

        <para>Axis is an older web service toolkit created by the Apache
        foundation. If your distribution does not have it installed, you can
        get a binary from <ulink
        url="http://www.apache.org">http://www.apache.org</ulink>. The
        following examples assume that you have Axis 1.4 installed.</para>

        <para>The VirtualBox SDK ships with an example for Axis that, again,
        is called <computeroutput>clienttest.java</computeroutput> and that
        imitates a few of the commands of
        <computeroutput>VBoxManage</computeroutput> over the wire.</para>

        <para>Then perform the following steps:<orderedlist>
            <listitem>
              <para>Create a working directory somewhere. Under your
              VirtualBox installation directory, find the
              <computeroutput>sdk/webservice/samples/java/axis/</computeroutput>
              directory and copy the file
              <computeroutput>clienttest.java</computeroutput> to your working
              directory.</para>
            </listitem>

            <listitem>
              <para>Open a terminal in your working directory. Execute the
              following command:<screen> java org.apache.axis.wsdl.WSDL2Java /path/to/vboxwebService.wsdl</screen></para>

              <para>The <computeroutput>vboxwebService.wsdl</computeroutput>
              file should be located in the
              <computeroutput>sdk/webservice/</computeroutput>
              directory.</para>

              <para>If this fails, your Apache Axis may not be located on your
              system classpath, and you may have to adjust the CLASSPATH
              environment variable. Something like this:<screen>export CLASSPATH="/path-to-axis-1_4/lib/*":$CLASSPATH</screen></para>

              <para>Use the directory where the Axis JAR files are located.
              Mind the quotes so that your shell passes the "*" character to
              the java executable without expanding. Alternatively, add a
              corresponding <computeroutput>-classpath</computeroutput>
              argument to the "java" call above.</para>

              <para>If the command executes successfully, you should see an
              "org" directory with subdirectories containing Java source files
              in your working directory. These classes represent the
              interfaces that the VirtualBox web service offers, as described
              by the WSDL file.</para>

              <para>This is the bit that makes using web services so
              attractive to client developers: if a language's toolkit
              understands WSDL, it can generate large amounts of support code
              automatically. Clients can then easily use this support code and
              can be done with just a few lines of code.</para>
            </listitem>

            <listitem>
              <para>Next, compile the
              <computeroutput>clienttest.java</computeroutput> source:<screen>javac clienttest.java </screen></para>

              <para>This should yield a "clienttest.class" file.</para>
            </listitem>

            <listitem>
              <para>To start the VirtualBox web service, open a second
              terminal and change to the directory where the VirtualBox
              executables are located. Then type:<screen>./vboxwebsrv -v</screen></para>

              <para>The web service now waits for connections and will run
              until you press Ctrl+C in this second terminal. The -v argument
              causes it to log all connections to the terminal. (See <xref
              linkend="runvboxwebsrv" os="" /> for details on how to run the
              web service.)</para>
            </listitem>

            <listitem>
              <para>Back in the original terminal where you compiled the Java
              source, run the resulting binary, which will then connect to the
              web service:<screen>java clienttest</screen></para>

              <para>The client sample will connect to the web service (on
              localhost, but the code could be changed to connect remotely if
              the web service was running on a different machine) and make a
              number of method calls. It will output the version number of
              your VirtualBox installation and a list of all virtual machines
              that are currently registered (with a bit of seemingly random
              data, which will be explained later).</para>
            </listitem>
          </orderedlist></para>
      </sect2>

      <sect2 id="raw-webservice-perl">
        <title>Raw web service example for Perl</title>

        <para>We also ship a small sample for Perl. It uses the SOAP::Lite
        perl module to communicate with the VirtualBox web service.</para>

        <para>The
        <computeroutput>sdk/bindings/webservice/perl/lib/</computeroutput>
        directory contains a pre-generated Perl module that allows for
        communicating with the web service from Perl. You can generate such a
        module yourself using the "stubmaker" tool that comes with SOAP::Lite,
        but since that tool is slow as well as sometimes unreliable, we are
        shipping a working module with the SDK for your convenience.</para>

        <para>Perform the following steps:<orderedlist>
            <listitem>
              <para>If SOAP::Lite is not yet installed on your system, you
              will need to install the package first. On Debian-based systems,
              the package is called
              <computeroutput>libsoap-lite-perl</computeroutput>; on Gentoo,
              it's <computeroutput>dev-perl/SOAP-Lite</computeroutput>.</para>
            </listitem>

            <listitem>
              <para>Open a terminal in the
              <computeroutput>sdk/bindings/webservice/perl/samples/</computeroutput>
              directory.</para>
            </listitem>

            <listitem>
              <para>To start the VirtualBox web service, open a second
              terminal and change to the directory where the VirtualBox
              executables are located. Then type:<screen>./vboxwebsrv -v</screen></para>

              <para>The web service now waits for connections and will run
              until you press Ctrl+C in this second terminal. The -v argument
              causes it to log all connections to the terminal. (See <xref
              linkend="runvboxwebsrv" os="" /> for details on how to run the
              web service.)</para>
            </listitem>

            <listitem>
              <para>In the first terminal with the Perl sample, run the
              clienttest.pl script:<screen>perl -I ../lib clienttest.pl</screen></para>
            </listitem>
          </orderedlist></para>
      </sect2>

      <sect2>
        <title>Programming considerations for the raw web service</title>

        <para>If you use the raw web service, you need to keep a number of
        things in mind, or you will sooner or later run into issues that are
        not immediately obvious. By contrast, the object-oriented client-side
        libraries described in <xref linkend="glue" /> take care of these
        things automatically and thus greatly simplify using the web
        service.</para>

        <sect3 id="rawws-conventions">
          <title>Fundamental conventions</title>

          <para>If you are familiar with other web services, you may find the
          VirtualBox web service to behave a bit differently to accommodate
          for the fact that VirtualBox web service more or less maps the
          VirtualBox Main COM API. The following main differences had to be
          taken care of:<itemizedlist>
              <listitem>
                <para>Web services, as expressed by WSDL, are not
                object-oriented. Even worse, they are normally stateless (or,
                in web services terminology, "loosely coupled"). Web service
                operations are entirely procedural, and one cannot normally
                make assumptions about the state of a web service between
                function calls.</para>

                <para>In particular, this normally means that you cannot work
                on objects in one method call that were created by another
                call.</para>
              </listitem>

              <listitem>
                <para>By contrast, the VirtualBox Main API, being expressed in
                COM, is object-oriented and works entirely on objects, which
                are grouped into public interfaces, which in turn have
                attributes and methods associated with them.</para>
              </listitem>
            </itemizedlist> For the VirtualBox web service, this results in
          three fundamental conventions:<orderedlist>
              <listitem>
                <para>All <emphasis role="bold">function names</emphasis> in
                the VirtualBox web service consist of an interface name and a
                method name, joined together by an underscore. This is because
                there are only functions ("operations") in WSDL, but no
                classes, interfaces, or methods.</para>

                <para>In addition, all calls to the VirtualBox web service
                (except for logon, see below) take a <emphasis
                role="bold">managed object reference</emphasis> as the first
                argument, representing the object upon which the underlying
                method is invoked. (Managed object references are explained in
                detail below; see <xref
                linkend="managed-object-references" />.)</para>

                <para>So, when one would normally code, in the pseudo-code of
                an object-oriented language, to invoke a method upon an
                object:<screen>IMachine machine;
result = machine.getName();</screen></para>

                <para>In the VirtualBox web service, this looks something like
                this (again, pseudo-code):<screen>IMachineRef machine;
result = IMachine_getName(machine);</screen></para>
              </listitem>

              <listitem>
                <para>To make the web service stateful, and objects persistent
                between method calls, the VirtualBox web service introduces a
                <emphasis role="bold">session manager</emphasis> (by way of
                the <xref linkend="IWebsessionManager"
                xreflabel="IWebsessionManager" /> interface), which manages
                object references. Any client wishing to interact with the web
                service must first log on to the session manager and in turn
                receives a managed object reference to an object that supports
                the <xref linkend="IVirtualBox" xreflabel="IVirtualBox" />
                interface (the basic interface in the Main API).</para>
              </listitem>
            </orderedlist></para>

          <para>In other words, as opposed to other web services, <emphasis
          role="bold">the VirtualBox web service is both object-oriented and
          stateful.</emphasis></para>
        </sect3>

        <sect3>
          <title>Example: A typical web service client session</title>

          <para>A typical short web service session to retrieve the version
          number of the VirtualBox web service (to be precise, the underlying
          Main API version number) looks like this:<orderedlist>
              <listitem>
                <para>A client logs on to the web service by calling <xref
                linkend="IWebsessionManager__logon"
                xreflabel="IWebsessionManager::logon()" /> with a valid user
                name and password. See <xref linkend="websrv_authenticate" />
                for details about how authentication works.</para>
              </listitem>

              <listitem>
                <para>On the server side,
                <computeroutput>vboxwebsrv</computeroutput> creates a session,
                which persists until the client calls <xref
                linkend="IWebsessionManager__logoff"
                xreflabel="IWebsessionManager::logoff()" /> or the session
                times out after a configurable period of inactivity (see <xref
                linkend="vboxwebsrv-ref" />).</para>

                <para>For the new session, the web service creates an instance
                of <xref linkend="IVirtualBox" xreflabel="IVirtualBox" />.
                This interface is the most central one in the Main API and
                allows access to all other interfaces, either through
                attributes or method calls. For example, IVirtualBox contains
                a list of all virtual machines that are currently registered
                (as they would be listed on the left side of the VirtualBox
                main program).</para>

                <para>The web service then creates a managed object reference
                for this instance of IVirtualBox and returns it to the calling
                client, which receives it as the return value of the logon
                call. Something like this:</para>

                <screen>string oVirtualBox;
oVirtualBox = webservice.IWebsessionManager_logon("user", "pass");</screen>

                <para>(The managed object reference "oVirtualBox" is just a
                string consisting of digits and dashes. However, it is a
                string with a meaning and will be checked by the web service.
                For details, see below. As hinted above, <xref
                linkend="IWebsessionManager__logon"
                xreflabel="IWebsessionManager::logon()" /> is the
                <emphasis>only</emphasis> operation provided by the web
                service which does not take a managed object reference as the
                first argument!)</para>
              </listitem>

              <listitem>
                <para>The VirtualBox Main API documentation says that the
                <computeroutput>IVirtualBox</computeroutput> interface has a
                <xref linkend="IVirtualBox__version" xreflabel="version" />
                attribute, which is a string. For each attribute, there is a
                "get" and a "set" method in COM, which maps to according
                operations in the web service. So, to retrieve the "version"
                attribute of this <computeroutput>IVirtualBox</computeroutput>
                object, the web service client does this:<screen>string version;
version = webservice.IVirtualBox_getVersion(oVirtualBox);

print version;</screen></para>

                <para>And it will print
                "@VBOX_VERSION_MAJOR@.@VBOX_VERSION_MINOR@.@VBOX_VERSION_BUILD@".</para>
              </listitem>

              <listitem>
                <para>The web service client calls <xref
                linkend="IWebsessionManager__logoff"
                xreflabel="IWebsessionManager::logoff()" /> with the
                VirtualBox managed object reference. This will clean up all
                allocated resources.</para>
              </listitem>
            </orderedlist></para>
        </sect3>

        <sect3 id="managed-object-references">
          <title>Managed object references</title>

          <para>To a web service client, a managed object reference looks like
          a string: two 64-bit hex numbers separated by a dash. This string,
          however, represents a COM object that "lives" in the web service
          process. The two 64-bit numbers encoded in the managed object
          reference represent a session ID (which is the same for all objects
          in the same web service session, i.e. for all objects after one
          logon) and a unique object ID within that session.</para>

          <para>Managed object references are created in two
          situations:<orderedlist>
              <listitem>
                <para>When a client logs on, by calling <xref
                linkend="IWebsessionManager__logon"
                xreflabel="IWebsessionManager::logon()" />.</para>

                <para>Upon logon, the websession manager creates one instance
                of <xref linkend="IVirtualBox" xreflabel="IVirtualBox" /> and
                another object of <xref linkend="ISession"
                xreflabel="ISession" /> representing the web service session.
                This can be retrieved using <xref
                linkend="IWebsessionManager__getSessionObject"
                xreflabel="IWebsessionManager::getSessionObject()" />.</para>

                <para>(Technically, there is always only one <xref
                linkend="IVirtualBox" xreflabel="IVirtualBox" /> object, which
                is shared between all sessions and clients, as it is a COM
                singleton. However, each session receives its own managed
                object reference to it. The <xref linkend="ISession"
                xreflabel="ISession" /> object, however, is created and
                destroyed for each session.)</para>
              </listitem>

              <listitem>
                <para>Whenever a web service clients invokes an operation
                whose COM implementation creates COM objects.</para>

                <para>For example, <xref linkend="IVirtualBox__createMachine"
                xreflabel="IVirtualBox::createMachine()" /> creates a new
                instance of <xref linkend="IMachine" xreflabel="IMachine" />;
                the COM object returned by the COM method call is then wrapped
                into a managed object reference by the web server, and this
                reference is returned to the web service client.</para>
              </listitem>
            </orderedlist></para>

          <para>Internally, in the web service process, each managed object
          reference is simply a small data structure, containing a COM pointer
          to the "real" COM object, the web session ID and the object ID. This
          structure is allocated on creation and stored efficiently in hashes,
          so that the web service can look up the COM object quickly whenever
          a web service client wishes to make a method call. The random
          session ID also ensures that one web service client cannot intercept
          the objects of another.</para>

          <para>Managed object references are not destroyed automatically and
          must be released by explicitly calling <xref
          linkend="IManagedObjectRef__release"
          xreflabel="IManagedObjectRef::release()" />. This is important, as
          otherwise hundreds or thousands of managed object references (and
          corresponding COM objects, which can consume much more memory!) can
          pile up in the web service process and eventually cause it to deny
          service.</para>

          <para>To reiterate: The underlying COM object, which the reference
          points to, is only freed if the managed object reference is
          released. It is therefore vital that web service clients properly
          clean up after the managed object references that are returned to
          them.</para>

          <para>When a web service client calls <xref
          linkend="IWebsessionManager__logoff"
          xreflabel="IWebsessionManager::logoff()" />, all managed object
          references created during the session are automatically freed. For
          short-lived sessions that do not create a lot of objects, logging
          off may therefore be sufficient, although it is certainly not "best
          practice".</para>
        </sect3>

        <sect3>
          <title>Some more detail about web service operation</title>

          <sect4 id="soap">
            <title>SOAP messages</title>

            <para>Whenever a client makes a call to a web service, this
            involves a complicated procedure internally. These calls are
            remote procedure calls. Each such procedure call typically
            consists of two "message" being passed, where each message is a
            plain-text HTTP request with a standard HTTP header and a special
            XML document following. This XML document encodes the name of the
            procedure to call and the argument names and values passed to
            it.</para>

            <para>To give you an idea of what such a message looks like,
            assuming that a web service provides a procedure called
            "SayHello", which takes a string "name" as an argument and returns
            "Hello" with a space and that name appended, the request message
            could look like this:</para>

            <para><screen>&lt;?xml version="1.0" encoding="UTF-8"?&gt;
&lt;SOAP-ENV:Envelope
 xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"
 xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/"
 xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
 xmlns:xsd="http://www.w3.org/2001/XMLSchema"
 xmlns:test="http://test/"&gt;
&lt;SOAP-ENV:Body&gt;
   &lt;test:SayHello&gt;
    &lt;name&gt;Peter&lt;/name&gt;
   &lt;/test:SayHello&gt;
 &lt;/SOAP-ENV:Body&gt;
&lt;/SOAP-ENV:Envelope&gt;</screen>A similar message -- the "response" message
            -- would be sent back from the web service to the client,
            containing the return value "Hello Peter".</para>

            <para>Most programming languages provide automatic support to
            generate such messages whenever code in that programming language
            makes such a request. In other words, these programming languages
            allow for writing something like this (in pseudo-C++ code):</para>

            <para><screen>webServiceClass service("localhost", 18083); // server and port
string result = service.SayHello("Peter");  // invoke remote procedure</screen>and
            would, for these two pseudo-lines, automatically perform these
            steps:</para>

            <para><orderedlist>
                <listitem>
                  <para>prepare a connection to a web service running on port
                  18083 of "localhost";</para>
                </listitem>

                <listitem>
                  <para>for the <computeroutput>SayHello()</computeroutput>
                  function of the web service, generate a SOAP message like in
                  the above example by encoding all arguments of the remote
                  procedure call (which could involve all kinds of type
                  conversions and complex marshalling for arrays and
                  structures);</para>
                </listitem>

                <listitem>
                  <para>connect to the web service via HTTP and send that
                  message;</para>
                </listitem>

                <listitem>
                  <para>wait for the web service to send a response
                  message;</para>
                </listitem>

                <listitem>
                  <para>decode that response message and put the return value
                  of the remote procedure into the "result" variable.</para>
                </listitem>
              </orderedlist></para>
          </sect4>

          <sect4 id="wsdl">
            <title>Service descriptions in WSDL</title>

            <para>In the above explanations about SOAP, it was left open how
            the programming language learns about how to translate function
            calls in its own syntax into proper SOAP messages. In other words,
            the programming language needs to know what operations the web
            service supports and what types of arguments are required for the
            operation's data in order to be able to properly serialize and
            deserialize the data to and from the web service. For example, if
            a web service operation expects a number in "double" floating
            point format for a particular parameter, the programming language
            cannot send to it a string instead.</para>

            <para>For this, the Web Service Definition Language (WSDL) was
            invented, another XML substandard that describes exactly what
            operations the web service supports and, for each operation, which
            parameters and types are needed with each request and response
            message. WSDL descriptions can be incredibly verbose, and one of
            the few good things that can be said about this standard is that
            it is indeed supported by most programming languages.</para>

            <para>So, if it is said that a programming language "supports" web
            services, this typically means that a programming language has
            support for parsing WSDL files and somehow integrating the remote
            procedure calls into the native language syntax -- for example,
            like in the Java sample shown in <xref
            linkend="webservice-java-sample" />.</para>

            <para>For details about how programming languages support web
            services, please refer to the documentation that comes with the
            individual languages. Here are a few pointers:</para>

            <orderedlist>
              <listitem>
                <para>For <emphasis role="bold">C++,</emphasis> among many
                others, the gSOAP toolkit is a good option. Parts of gSOAP are
                also used in VirtualBox to implement the VirtualBox web
                service.</para>
              </listitem>

              <listitem>
                <para>For <emphasis role="bold">Java,</emphasis> there are
                several implementations already described in this document
                (see <xref linkend="glue-jax-ws" /> and <xref
                linkend="webservice-java-sample" />).</para>
              </listitem>

              <listitem>
                <para><emphasis role="bold">Perl</emphasis> supports WSDL via
                the SOAP::Lite package. This in turn comes with a tool called
                <computeroutput>stubmaker.pl</computeroutput> that allows you
                to turn any WSDL file into a Perl package that you can import.
                (You can also import any WSDL file "live" by having it parsed
                every time the script runs, but that can take a while.) You
                can then code (again, assuming the above example):<screen>my $result = servicename-&gt;sayHello("Peter");</screen></para>

                <para>A sample that uses SOAP::Lite was described in <xref
                linkend="raw-webservice-perl" />.</para>
              </listitem>
            </orderedlist>
          </sect4>
        </sect3>
      </sect2>
    </sect1>

    <sect1 id="api_com">
      <title>Using COM/XPCOM directly</title>

      <para>If you do not require <emphasis>remote</emphasis> procedure calls
      such as those offered by the VirtualBox web service, and if you know
      Python or C++ as well as COM, you might find it preferable to program
      VirtualBox's Main API directly via COM.</para>

      <para>COM stands for "Component Object Model" and is a standard
      originally introduced by Microsoft in the 1990s for Microsoft Windows.
      It allows for organizing software in an object-oriented way and across
      processes; code in one process may access objects that live in another
      process.</para>

      <para>COM has several advantages: it is language-neutral, meaning that
      even though all of VirtualBox is internally written in C++, programs
      written in other languages could communicate with it. COM also cleanly
      separates interface from implementation, so that external programs need
      not know anything about the messy and complicated details of VirtualBox
      internals.</para>

      <para>On a Windows host, all parts of VirtualBox will use the COM
      functionality that is native to Windows. On other hosts (including
      Linux), VirtualBox comes with a built-in implementation of XPCOM, as
      originally created by the Mozilla project, which we have enhanced to
      support interprocess communication on a level comparable to Microsoft
      COM. Internally, VirtualBox has an abstraction layer that allows the
      same VirtualBox code to work both with native COM as well as our XPCOM
      implementation.</para>

      <sect2 id="pycom">
        <title>Python COM API</title>

        <para>On Windows, Python scripts can use COM and VirtualBox interfaces
        to control almost all aspects of virtual machine execution. As an
        example, use the following commands to instantiate the VirtualBox
        object and start a VM: <screen>
       vbox = win32com.client.Dispatch("VirtualBox.VirtualBox")
       session = win32com.client.Dispatch("VirtualBox.Session")
       mach = vbox.findMachine("uuid or name  of machine to start")
       progress = mach.launchVMProcess(session, "gui", "")
       progress.waitForCompletion(-1)
      </screen> Also, see
        <computeroutput>/bindings/glue/python/samples/vboxshell.py</computeroutput>
        for more advanced usage scenarious. However, unless you have specific
        requirements, we strongly recommend to use the generic glue layer
        described in the next section to access MS COM objects.</para>
      </sect2>

      <sect2 id="glue-python">
        <title>Common Python bindings layer</title>

        <para>As different wrappers ultimately provide access to the same
        underlying API, and to simplify porting and development of Python
        application using the VirtualBox Main API, we developed a common glue
        layer that abstracts out most platform-specific details from the
        application and allows the developer to focus on application logic.
        The VirtualBox installer automatically sets up this glue layer for the
        system default Python install. See below for details on how to set up
        the glue layer if you want to use a different Python
        installation.</para>

        <para>In this layer, the class
        <computeroutput>VirtualBoxManager</computeroutput> hides most
        platform-specific details. It can be used to access both the local
        (COM) and the web service based API. The following code can be used by
        an application to use the glue layer.</para>

        <screen># This code assumes vboxapi.py from VirtualBox distribution
# being in PYTHONPATH, or installed system-wide
from vboxapi import VirtualBoxManager

# This code initializes VirtualBox manager with default style
# and parameters
virtualBoxManager = VirtualBoxManager(None, None)

# Alternatively, one can be more verbose, and initialize
# glue with web service backend, and provide authentication
# information
virtualBoxManager = VirtualBoxManager("WEBSERVICE",
                                      {'url':'http://myhost.com::18083/',
                                      'user':'me',
                                      'password':'secret'})        </screen>

        <para>We supply the <computeroutput>VirtualBoxManager</computeroutput>
        constructor with 2 arguments: style and parameters. Style defines
        which bindings style to use (could be "MSCOM", "XPCOM" or
        "WEBSERVICE"), and if set to <computeroutput>None</computeroutput>
        defaults to usable platform bindings (MS COM on Windows, XPCOM on
        other platforms). The second argument defines parameters, passed to
        the platform-specific module, as we do in the second example, where we
        pass username and password to be used to authenticate against the web
        service.</para>

        <para>After obtaining the
        <computeroutput>VirtualBoxManager</computeroutput> instance, one can
        perform operations on the IVirtualBox class. For example, the
        following code will a start virtual machine by name or ID:</para>

        <screen>from vboxapi import VirtualBoxManager
mgr = VirtualBoxManager(None, None)
vbox = mgr.vbox
name = "Linux"
mach = vbox.findMachine(name)
session = mgr.mgr.getSessionObject(vbox)
progress = mach.launchVMProcess(session, "gui", "")
progress.waitForCompletion(-1)
mgr.closeMachineSession(session)
        </screen>
        <para>
          Following code will print all registered machines and their log folders
        </para>
        <screen>from vboxapi import VirtualBoxManager
mgr = VirtualBoxManager(None, None)
vbox = mgr.vbox

for m in mgr.getArray(vbox, 'machines'):
print "Machine '%s' logs in '%s'" %(m.name, m.logFolder)
        </screen>

        <para>Code above demonstartes cross-platform access to array properties
        (certain limitations prevent one from using
        <computeroutput>vbox.machines</computeroutput> to access a list of
        available virtual machines in case of XPCOM), and a mechanism of
        uniform session creation and closing
        (<computeroutput>mgr.mgr.getSessionObject()</computeroutput>).</para>

        <para>In case you want to use the glue layer with a different Python
        installation, use these steps in a shell to add the necessary
        files:</para>

        <screen>    # cd VBOX_INSTALL_PATH/sdk/installer
    # PYTHON vboxapisetup.py install</screen>
      </sect2>

      <sect2 id="cppcom">
        <title>C++ COM API</title>

        <para>C++ is the language that VirtualBox itself is written in, so C++
        is the most direct way to use the Main API -- but it is not
        necessarily the easiest, as using COM and XPCOM has its own set of
        complications.</para>

        <para>VirtualBox ships with sample programs that demonstrate how to
        use the Main API to implement a number of tasks on your host platform.
        These samples can be found in the
        <computeroutput>/bindings/xpcom/samples</computeroutput> directory for
        Linux, Mac OS X and Solaris and
        <computeroutput>/bindings/mscom/samples</computeroutput> for Windows.
        The two samples are actually different, because the one for Windows
        uses native COM, whereas the other uses our XPCOM implementation, as
        described above.</para>

        <para>Since COM and XPCOM are conceptually very similar but vary in
        the implementation details, we have created a "glue" layer that
        shields COM client code from these differences. All VirtualBox uses is
        this glue layer, so the same code written once works on both Windows
        hosts (with native COM) as well as on other hosts (with our XPCOM
        implementation). It is recommended to always use this glue code
        instead of using the COM and XPCOM APIs directly, as it is very easy
        to make your code completely independent from the platform it is
        running on.<!--    A third sample,
        <computeroutput>tstVBoxAPIGlue.cpp</computeroutput>, illustrates how to
        use the glue layer.
--></para>

        <para>In order to encapsulate platform differences between Microsoft
        COM and XPCOM, the following items should be kept in mind when using
        the glue layer:</para>

        <para><orderedlist>
            <listitem>
              <para><emphasis role="bold">Attribute getters and
              setters.</emphasis> COM has the notion of "attributes" in
              interfaces, which roughly compare to C++ member variables in
              classes. The difference is that for each attribute declared in
              an interface, COM automatically provides a "get" method to
              return the attribute's value. Unless the attribute has been
              marked as "readonly", a "set" attribute is also provided.</para>

              <para>To illustrate, the IVirtualBox interface has a "version"
              attribute, which is read-only and of the "wstring" type (the
              standard string type in COM). As a result, you can call the
              "get" method for this attribute to retrieve the version number
              of VirtualBox.</para>

              <para>Unfortunately, the implementation differs between COM and
              XPCOM. Microsoft COM names the "get" method like this:
              <computeroutput>get_Attribute()</computeroutput>, whereas XPCOM
              uses this syntax:
              <computeroutput>GetAttribute()</computeroutput> (and accordingly
              for "set" methods). To hide these differences, the VirtualBox
              glue code provides the
              <computeroutput>COMGETTER(attrib)</computeroutput> and
              <computeroutput>COMSETTER(attrib)</computeroutput> macros. So,
              <computeroutput>COMGETTER(version)()</computeroutput> (note, two
              pairs of brackets) expands to
              <computeroutput>get_Version()</computeroutput> on Windows and
              <computeroutput>GetVersion()</computeroutput> on other
              platforms.</para>
            </listitem>

            <listitem>
              <para><emphasis role="bold">Unicode conversions.</emphasis>
              While the rest of the modern world has pretty much settled on
              encoding strings in UTF-8, COM, unfortunately, uses UCS-16
              encoding. This requires a lot of conversions, in particular
              between the VirtualBox Main API and the Qt GUI, which, like the
              rest of Qt, likes to use UTF-8.</para>

              <para>To facilitate these conversions, VirtualBox provides the
              <computeroutput>com::Bstr</computeroutput> and
              <computeroutput>com::Utf8Str</computeroutput> classes, which
              support all kinds of conversions back and forth.</para>
            </listitem>

            <listitem>
              <para><emphasis role="bold">COM autopointers.</emphasis>
              Possibly the greatest pain of using COM -- reference counting --
              is alleviated by the
              <computeroutput>ComPtr&lt;&gt;</computeroutput> template
              provided by the <computeroutput>ptr.h</computeroutput> file in
              the glue layer.</para>
            </listitem>
          </orderedlist></para>
      </sect2>

      <sect2 id="event-queue">
        <title>Event queue processing</title>

        <para>Both VirtualBox client programs and frontends should
        periodically perform processing of the main event queue, and do that
        on the application's main thread. In case of a typical GUI Windows/Mac
        OS application this happens automatically in the GUI's dispatch loop.
        However, for CLI only application, the appropriate actions have to be
        taken. For C++ applications, the VirtualBox SDK provided glue method
        <screen>
            int EventQueue::processEventQueue(uint32_t cMsTimeout)
         </screen> can be used for both blocking and non-blocking operations.
        For the Python bindings, a common layer provides the method <screen>
          VirtualBoxManager.waitForEvents(ms)
         </screen> with similar semantics.</para>

        <para>Things get somewhat more complicated for situations where an
        application using VirtualBox cannot directly control the main event
        loop and the main event queue is separated from the event queue of the
        programming librarly (for example in case of Qt on Unix platforms). In
        such a case, the application developer is advised to use a
        platform/toolkit specific event injection mechanism to force event
        queue checks either based on periodical timer events delivered to the
        main thread, or by using custom platform messages to notify the main
        thread when events are available. See the VBoxSDL and Qt (VirtualBox)
        frontends as examples.</para>
      </sect2>

      <sect2 id="vbcom">
        <title>Visual Basic and Visual Basic Script (VBS) on Windows
        hosts</title>

        <para>On Windows hosts, one can control some of the VirtualBox Main
        API functionality from VBS scripts, and pretty much everything from
        Visual Basic programs.<footnote>
            <para>The difference results from the way VBS treats COM
            safearrays, which are used to keep lists in the Main API. VBS
            expects every array element to be a
            <computeroutput>VARIANT</computeroutput>, which is too strict a
            limitation for any high performance API. We may lift this
            restriction for interface APIs in a future version, or
            alternatively provide conversion APIs.</para>
          </footnote></para>

        <para>VBS is scripting language available in any recent Windows
        environment. As an example, the following VBS code will print
        VirtualBox version: <screen>
         set vb = CreateObject("VirtualBox.VirtualBox")
         Wscript.Echo "VirtualBox version " &amp; vb.version
       </screen> See
        <computeroutput>bindings/mscom/vbs/sample/vboxinfo.vbs</computeroutput>
        for the complete sample.</para>

        <para>Visual Basic is a popular high level language capable of
        accessing COM objects. The following VB code will iterate over all
        available virtual machines:<screen>
         Dim vb As VirtualBox.IVirtualBox

         vb = CreateObject("VirtualBox.VirtualBox")
         machines = ""
         For Each m In vb.Machines
            m = m &amp; " " &amp; m.Name
         Next
       </screen> See
        <computeroutput>bindings/mscom/vb/sample/vboxinfo.vb</computeroutput>
        for the complete sample.</para>
      </sect2>

      <sect2 id="cbinding">
        <title>C binding to XPCOM API</title>

        <note>
          <para>This section currently applies to Linux hosts only.</para>
        </note>

        <para>Starting with version 2.2, VirtualBox offers a C binding for the
        XPCOM API.</para>

        <para>The C binding provides a layer enabling object creation, method
        invocation and attribute access from C.</para>

        <sect3 id="c-gettingstarted">
          <title>Getting started</title>

          <para>The following sections describe how to use the C binding in a
          C program.</para>

          <para>For Linux, a sample program is provided which demonstrates use
          of the C binding to initialize XPCOM, get handles for VirtualBox and
          Session objects, make calls to list and start virtual machines, and
          uninitialize resources when done. The program uses the VBoxGlue
          library to open the C binding layer during runtime.</para>

          <para>The sample program
          <computeroutput>tstXPCOMCGlue</computeroutput> is located in the bin
          directory and can be run without arguments. It lists registered
          machines on the host along with some additional information and ask
          for a machine to start. The source for this program is available in
          <computeroutput>sdk/bindings/xpcom/cbinding/samples/</computeroutput>
          directory. The source for the VBoxGlue library is available in the
          <computeroutput>sdk/bindings/xpcom/cbinding/</computeroutput>
          directory.</para>
        </sect3>

        <sect3 id="c-initialization">
          <title>XPCOM initialization</title>

          <para>Just like in C++, XPCOM needs to be initialized before it can
          be used. The <computeroutput>VBoxCAPI_v2_5.h</computeroutput> header
          provides the interface to the C binding. Here's how to initialize
          XPCOM:</para>

          <screen>#include "VBoxCAPI_v2_5.h"
...
PCVBOXXPCOM g_pVBoxFuncs = NULL;
IVirtualBox *vbox        = NULL;
ISession *session        = NULL;

/*
 * VBoxGetXPCOMCFunctions() is the only function exported by
 * VBoxXPCOMC.so and the only one needed to make virtualbox
 * work with C. This functions gives you the pointer to the
 * function table (g_pVBoxFuncs).
 *
 * Once you get the function table, then how and which functions
 * to use is explained below.
 *
 * g_pVBoxFuncs-&gt;pfnComInitialize does all the necessary startup
 * action and provides us with pointers to vbox and session handles.
 * It should be matched by a call to g_pVBoxFuncs-&gt;pfnComUninitialize()
 * when done.
 */

g_pVBoxFuncs = VBoxGetXPCOMCFunctions(VBOX_XPCOMC_VERSION);
g_pVBoxFuncs-&gt;pfnComInitialize(&amp;vbox, &amp;session);</screen>

          <para>If either <computeroutput>vbox</computeroutput> or
          <computeroutput>session</computeroutput> is still
          <computeroutput>NULL</computeroutput>, initialization failed and the
          XPCOM API cannot be used.</para>
        </sect3>

        <sect3 id="c-invocation">
          <title>XPCOM method invocation</title>

          <para>Method invocation is straightforward. It looks pretty much
          like the C++ way, augmented with an extra indirection due to
          accessing the vtable and passing a pointer to the object as the
          first argument to serve as the <computeroutput>this</computeroutput>
          pointer.</para>

          <para>Using the C binding, all method invocations return a numeric
          result code.</para>

          <para>If an interface is specified as returning an object, a pointer
          to a pointer to the appropriate object must be passed as the last
          argument. The method will then store an object pointer in that
          location.</para>

          <para>In other words, to call an object's method what you need
          is</para>

          <screen>IObject *object;
nsresult rc;
...
/*
 * Calling void IObject::method(arg, ...)
 */
rc = object-&gt;vtbl-&gt;Method(object, arg, ...);

...
IFoo *foo;
/*
 * Calling IFoo IObject::method(arg, ...)
 */
rc = object-&gt;vtbl-&gt;Method(object, args, ..., &amp;foo);</screen>

          <para>As a real-world example of a method invocation, let's call
          <xref linkend="IMachine__launchVMProcess"
          xreflabel="IMachine::launchVMProcess" /> which returns an
          IProgress object. Note again that the method name is
          capitalized.</para>

          <screen>IProgress *progress;
...
rc = vbox-&gt;vtbl-&gt;LaunchVMProcess(
    machine,       /* this  */
    session,       /* arg 1 */
    sessionType,   /* arg 2 */
    env,           /* arg 3 */
    &amp;progress      /* Out   */
);
</screen>
        </sect3>

        <sect3 id="c-attributes">
          <title>XPCOM attribute access</title>

          <para>A construct similar to calling non-void methods is used to
          access object attributes. For each attribute there exists a getter
          method, the name of which is composed of
          <computeroutput>Get</computeroutput> followed by the capitalized
          attribute name. Unless the attribute is read-only, an analogous
          <computeroutput>Set</computeroutput> method exists. Let's apply
          these rules to read the <xref linkend="IVirtualBox__revision"
          xreflabel="IVirtualBox::revision" /> attribute.</para>

          <para>Using the <computeroutput>IVirtualBox</computeroutput> handle
          <computeroutput>vbox</computeroutput> obtained above, calling its
          <computeroutput>GetRevision</computeroutput> method looks like
          this:</para>

          <screen>PRUint32   rev;

rc = vbox-&gt;vtbl-&gt;GetRevision(vbox, &amp;rev);
if (NS_SUCCEEDED(rc))
{
    printf("Revision: %u\n", (unsigned)rev);
}
</screen>

          <para>All objects with their methods and attributes are documented
          in <xref linkend="sdkref_classes" />.</para>
        </sect3>

        <sect3 id="c-string-handling">
          <title>String handling</title>

          <para>When dealing with strings you have to be aware of a string's
          encoding and ownership.</para>

          <para>Internally, XPCOM uses UTF-16 encoded strings. A set of
          conversion functions is provided to convert other encodings to and
          from UTF-16. The type of a UTF-16 character is
          <computeroutput>PRUnichar</computeroutput>. Strings of UTF-16
          characters are arrays of that type. Most string handling functions
          take pointers to that type. Prototypes for the following conversion
          functions are declared in
          <computeroutput>VBoxCAPI_v2_5.h</computeroutput>.</para>

          <sect4>
            <title>Conversion of UTF-16 to and from UTF-8</title>

            <screen>int (*pfnUtf16ToUtf8)(const PRUnichar *pwszString, char **ppszString);
int (*pfnUtf8ToUtf16)(const char *pszString, PRUnichar **ppwszString);
</screen>
          </sect4>

          <sect4>
            <title>Ownership</title>

            <para>The ownership of a string determines who is responsible for
            releasing resources associated with the string. Whenever XPCOM
            creates a string, ownership is transferred to the caller. To avoid
            resource leaks, the caller should release resources once the
            string is no longer needed.</para>
          </sect4>
        </sect3>

        <sect3 id="c-uninitialization">
          <title>XPCOM uninitialization</title>

          <para>Uninitialization is performed by
          <computeroutput>g_pVBoxFuncs-&gt;pfnComUninitialize().</computeroutput>
          If your program can exit from more than one place, it is a good idea
          to install this function as an exit handler with Standard C's
          <computeroutput>atexit()</computeroutput> just after calling
          <computeroutput>g_pVBoxFuncs-&gt;pfnComInitialize()</computeroutput>
          , e.g. <screen>#include &lt;stdlib.h&gt;
#include &lt;stdio.h&gt;

...

/*
 * Make sure g_pVBoxFuncs-&gt;pfnComUninitialize() is called at exit, no
 * matter if we return from the initial call to main or call exit()
 * somewhere else. Note that atexit registered functions are not
 * called upon abnormal termination, i.e. when calling abort() or
 * signal(). Separate provisions must be taken for these cases.
 */

if (atexit(g_pVBoxFuncs-&gt;pfnComUninitialize()) != 0) {
    fprintf(stderr, "failed to register g_pVBoxFuncs-&gt;pfnComUninitialize()\n");
    exit(EXIT_FAILURE);
}
</screen></para>

          <para>Another idea would be to write your own <computeroutput>void
          myexit(int status)</computeroutput> function, calling
          <computeroutput>g_pVBoxFuncs-&gt;pfnComUninitialize()</computeroutput>
          followed by the real <computeroutput>exit()</computeroutput>, and
          use it instead of <computeroutput>exit()</computeroutput> throughout
          your program and at the end of
          <computeroutput>main.</computeroutput></para>

          <para>If you expect the program to be terminated by a signal (e.g.
          user types CTRL-C sending SIGINT) you might want to install a signal
          handler setting a flag noting that a signal was sent and then
          calling
          <computeroutput>g_pVBoxFuncs-&gt;pfnComUninitialize()</computeroutput>
          later on (usually <emphasis>not</emphasis> from the handler itself
          .)</para>

          <para>That said, if a client program forgets to call
          <computeroutput>g_pVBoxFuncs-&gt;pfnComUninitialize()</computeroutput>
          before it terminates, there is a mechanism in place which will
          eventually release references held by the client. You should not
          rely on this, however.</para>
        </sect3>

        <sect3 id="c-linking">
          <title>Compiling and linking</title>

          <para>A program using the C binding has to open the library during
          runtime using the help of glue code provided and as shown in the
          example <computeroutput>tstXPCOMCGlue.c</computeroutput>.
          Compilation and linking can be achieved, e.g., with a makefile
          fragment similar to</para>

          <screen># Where is the XPCOM include directory?
INCS_XPCOM    = -I../../include
# Where is the glue code directory?
GLUE_DIR      = ..
GLUE_INC      = -I..

#Compile Glue Library
VBoxXPCOMCGlue.o: $(GLUE_DIR)/VBoxXPCOMCGlue.c
    $(CC) $(CFLAGS) $(INCS_XPCOM) $(GLUE_INC) -o $@ -c $&lt;

# Compile.
program.o: program.c VBoxCAPI_v2_5.h
    $(CC) $(CFLAGS) $(INCS_XPCOM) $(GLUE_INC) -o $@ -c $&lt;

# Link.
program: program.o VBoxXPCOMCGlue.o
    $(CC) -o $@ $^ -ldl</screen>
        </sect3>
      </sect2>
    </sect1>
  </chapter>

  <chapter id="concepts">
    <title>Basic VirtualBox concepts; some examples</title>

    <para>The following explains some basic VirtualBox concepts such as the
    VirtualBox object, sessions and how virtual machines are manipulated and
    launched using the Main API. The coding examples use a pseudo-code style
    closely related to the object-oriented web service (OOWS) for JAX-WS.
    Depending on which environment you are using, you will need to adjust the
    examples.</para>

    <sect1>
      <title>Obtaining basic machine information. Reading attributes</title>

      <para>Any program using the Main API will first need access to the
      global VirtualBox object (see <xref linkend="IVirtualBox"
      xreflabel="IVirtualBox" />), from which all other functionality of the
      API is derived. With the OOWS for JAX-WS, this is returned from the
      <xref linkend="IWebsessionManager__logon"
      xreflabel="IWebsessionManager::logon()" /> call.</para>

      <para>To enumerate virtual machines, one would look at the "machines"
      array attribute in the VirtualBox object (see <xref
      linkend="IVirtualBox__machines" xreflabel="IVirtualBox::machines" />).
      This array contains all virtual machines currently registered with the
      host, each of them being an instance of <xref linkend="IMachine"
      xreflabel="IMachine" />. From each such instance, one can query
      additional information, such as the UUID, the name, memory, operating
      system and more by looking at the attributes; see the attributes list in
      <xref linkend="IMachine" xreflabel="IMachine documentation" />.</para>

      <para>As mentioned in the preceding chapters, depending on your
      programming environment, attributes are mapped to corresponding "get"
      and (if the attribute is not read-only) "set" methods. So when the
      documentation says that IMachine has a "<xref linkend="IMachine__name"
      xreflabel="name" />" attribute, this means you need to code something
      like the following to get the machine's name:<screen>IMachine machine = ...;
String name = machine.getName();</screen>Boolean attribute getters can
      sometimes be called <computeroutput>isAttribute()</computeroutput> due
      to JAX-WS naming conventions.</para>
    </sect1>

    <sect1>
      <title>Changing machine settings. Sessions</title>

      <para>As said in the previous section, to read a machine's attribute,
      one invokes the corresponding "get" method. One would think that to
      change settings of a machine, it would suffice to call the corresponding
      "set" method -- for example, to set a VM's memory to 1024 MB, one would
      call <computeroutput>setMemorySize(1024)</computeroutput>. Try that, and
      you will get an error: "The machine is not mutable."</para>

      <para>So unfortunately, things are not that easy. VirtualBox is a
      complicated environment in which multiple processes compete for possibly
      the same resources, especially machine settings. As a result, machines
      must be "locked" before they can either be modified or started. This is
      to prevent multiple processes from making conflicting changes to a
      machine: it should, for example, not be allowed to change the memory
      size of a virtual machine while it is running. (You can't add more
      memory to a real computer while it is running either, at least not to an
      ordinary PC.) Also, two processes must not change settings at the same
      time, or start a machine at the same time.</para>

      <para>These requirements are implemented in the Main API by way of
      "sessions", in particular, the <xref linkend="ISession"
      xreflabel="ISession" /> interface. Each process which talks to
      VirtualBox needs its own instance of ISession. In the web service, you
      cannot create such an object, but
      <computeroutput>vboxwebsrv</computeroutput> creates one for you when you
      log on, which you can obtain by calling <xref
      linkend="IWebsessionManager__getSessionObject"
      xreflabel="IWebsessionManager::getSessionObject()" />.</para>

      <para>This session object must then be used like a mutex semaphore in
      common programming environments. Before you can change machine settings,
      you must write-lock the machine by calling <xref
      linkend="IMachine__lockMachine" xreflabel="IMachine::lockMachine()" />
      with your process's session object.</para>

      <para>After the machine has been locked, the <xref
      linkend="ISession__machine" xreflabel="ISession::machine" /> attribute
      contains a copy of the original IMachine object upon which the session
      was opened, but this copy is "mutable": you can invoke "set" methods on
      it.</para>

      <para>When done making the changes to the machine, you must call <xref
      linkend="IMachine__saveSettings"
      xreflabel="IMachine::saveSettings()" />, which will copy the changes you
      have made from your "mutable" machine back to the real machine and write
      them out to the machine settings XML file. This will make your changes
      permanent.</para>

      <para>Finally, it is important to always unlock the machine again, by
      calling <xref linkend="ISession__unlockMachine"
      xreflabel="ISession::unlockMachine()" />. Otherwise, when the calling
      process end, the machine will receive the "aborted" state, which can
      lead to loss of data.</para>

      <para>So, as an example, the sequence to change a machine's memory to
      1024 MB is something like this:<screen>IWebsessionManager mgr ...;
IVirtualBox vbox = mgr.logon(user, pass);
...
IMachine machine = ...;  // read-only machine
ISession session = mgr.getSessionObject();
machine.lockMachine(session, LockType.Write); // machine is now locked for writing
IMachine mutable = session.getMachine();      // obtain the mutable machine copy
mutable.setMemorySize(1024);
mutable.saveSettings();                       // write settings to XML
session.unlockMachine();</screen></para>
    </sect1>

    <sect1>
      <title>Launching virtual machines</title>

      <para>To launch a virtual machine, you call <xref
      linkend="IMachine__launchVMProcess"
      xreflabel="IMachine::launchVMProcess()" />. In doing so, the caller
      instructs the VirtualBox engine to start a new process with the virtual
      machine in it, since to the host, each virtual machine looks like a
      single process, even if it has hundreds of its own processes inside.
      (This new VM process in turn obtains a write lock on the machine, as
      described above, to prevent conflicting changes from other processes;
      this is why opening another session will fail while the VM is
      running.)</para>

      <para>Starting a machine looks something like this:<screen>IWebsessionManager mgr ...;
IVirtualBox vbox = mgr.logon(user, pass);
...
IMachine machine = ...;  // read-only machine
ISession session = mgr.getSessionObject();
IProgress prog = machine.launchVMProcess(session,
                                         "gui",  // session type
                                         "");    // possibly environment setting
prog.waitForCompletion(10000);  // give the process 10 secs
if (prog.getResultCode() != 0)  // check success
    System.out.println("Cannot launch VM!")</screen></para>

      <para>The caller's session object can then be used as a sort of remote
      control to the VM process that was launched. It contains a "console"
      object (see <xref linkend="ISession__console"
      xreflabel="ISession::console" />) with which the VM can be paused,
      stopped, snapshotted or other things.</para>
    </sect1>

    <sect1>
      <title>VirtualBox events</title>

      <para>In VirtualBox, "events" provide a uniform mechanism to register
      for and consume specific events. A VirtualBox client can register an
      "event listener" (represented by the <xref linkend="IEventListener"
      xreflabel="IEventListener" /> interface), which will then get notified
      by the server when an event (represented by the <xref linkend="IEvent"
      xreflabel="IEvent" /> interface) happens.</para>

      <para>The IEvent interface is an abstract parent interface for all
      events that can occur in VirtualBox. The actual events that the server
      sends out are then of one of the specific subclasses, for example <xref
      linkend="IMachineStateChangedEvent"
      xreflabel="IMachineStateChangedEvent" /> or <xref
      linkend="IMediumChangedEvent" xreflabel="IMediumChangedEvent" />.</para>

      <para>As an example, the VirtualBox GUI waits for machine events and can
      thus update its display when the machine state changes or machine
      settings are modified, even if this happens in another client. This is
      how the GUI can automatically refresh its display even if you manipulate
      a machine from another client, for example, from VBoxManage.</para>

      <para>To register an event listener to listen to events, use code like
      this:<screen>EventSource es = console.getEventSource();
IEventListener listener = es.createListener();
VBoxEventType aTypes[] = (VBoxEventType.OnMachineStateChanged);
        // list of event types to listen for
es.registerListener(listener, aTypes, false /* active */);
        // register passive listener
IEvent ev = es.getEvent(listener, 1000);
        // wait up to one second for event to happen
if (ev != null)
{
    // downcast to specific event interface (in this case we have only registered
    // for one type, otherwise IEvent::type would tell us)
    IMachineStateChangedEvent mcse = IMachineStateChangedEvent.queryInterface(ev);
    ... // inspect and do something
    es.eventProcessed(listener, ev);
}
...
es.unregisterListener(listener); </screen></para>

      <para>A graphical user interface would probably best start its own
      thread to wait for events and then process these in a loop.</para>

      <para>The events mechanism was introduced with VirtualBox 3.3 and
      replaces various callback interfaces which were called for each event in
      the interface. The callback mechanism was not compatible with scripting
      languages, local Java bindings and remote web services as they do not
      support callbacks. The new mechanism with events and event listeners
      works with all of these.</para>

      <para>To simplify developement of application using events, concept of
      event aggregator was introduced. Essentially it's mechanism to aggregate
      multiple event sources into single one, and then work with this single
      aggregated event source instead of original sources. As an example, one
      can evaluate demo recorder in VirtualBox Python shell, shipped with SDK
      - it records mouse and keyboard events, represented as separate event
      sources. Code is essentially like this:<screen>
          listener = console.eventSource.createListener()
          agg = console.eventSource.createAggregator([console.keyboard.eventSource, console.mouse.eventSource])
          agg.registerListener(listener, [ctx['global'].constants.VBoxEventType_Any], False)
          registered = True
          end = time.time() + dur
          while  time.time() &lt; end:
              ev = agg.getEvent(listener, 1000)
              processEent(ev)
          agg.unregisterListener(listener)</screen> Without using aggregators
      consumer have to poll on both sources, or start multiple threads to
      block on those sources.</para>
    </sect1>
  </chapter>

  <chapter id="vboxshell">
    <title>The VirtualBox shell</title>

    <para>VirtualBox comes with an extensible shell, which allows you to
    control your virtual machines from the command line. It is also a
    nontrivial example of how to use the VirtualBox APIs from Python, for all
    three COM/XPCOM/WS styles of the API.</para>

    <para>You can easily extend this shell with your own commands. Create a
    subdirectory named <computeroutput>.VirtualBox/shexts</computeroutput>
    below your home directory and put a Python file implementing your shell
    extension commands in this directory. This file must contain an array
    named <computeroutput>commands</computeroutput> containing your command
    definitions: <screen>
        commands = {
        'cmd1': ['Command cmd1 help', cmd1],
        'cmd2': ['Command cmd2 help', cmd2]
        }
       </screen> For example, to create a command for creating hard drive
    images, the following code can be used: <screen>
        def createHdd(ctx,args):
          # Show some meaningful error message on wrong input
          if (len(args) &lt; 3):
            print "usage: createHdd sizeM location type"
            return 0

          # Get arguments
          size = int(args[1])
          loc = args[2]
          if len(args) &gt; 3:
            format = args[3]
          else:
            # And provide some meaningful defaults
            format = "vdi"

        # Call VirtualBox API, using context's fields
        hdd = ctx['vb'].createHardDisk(format, loc)
        # Access constants using ctx['global'].constants
        progress = hdd.createBaseStorage(size, ctx['global'].constants.HardDiskVariant_Standard)
        # use standard progress bar mechanism
        ctx['progressBar'](progress)


        # Report errors
        if not hdd.id:
           print "cannot create disk (file %s exist?)" %(loc)
           return 0

        # Give user some feedback on success too
        print "created HDD with id: %s" %(hdd.id)

        # 0 means continue execution, other values mean exit from the interpreter
        return 0

      commands = {
        'myCreateHDD': ['Create virtual HDD, createHdd size location type', createHdd]
        }
      </screen> Just store the above text in the file
    <computeroutput>createHdd</computeroutput> (or any other meaningful name)
    in <computeroutput>.VirtualBox/shexts/</computeroutput>. Start the
    VirtualBox shell, or just issue the
    <computeroutput>reloadExts</computeroutput> command, if the shell is
    already running. Your new command will now be available.</para>
  </chapter>

  <xi:include href="SDKRef_apiref.xml" xpointer="xpointer(/book/*)"
    xmlns:xi="http://www.w3.org/2001/XInclude" />

  <chapter id="hgcm">
    <title>Host-Guest Communication Manager</title>

    <para>The VirtualBox Host-Guest Communication Manager (HGCM) allows a
    guest application or a guest driver to call a host shared library. The
    following features of VirtualBox are implemented using HGCM: <itemizedlist>
        <listitem>
          <para>Shared Folders</para>
        </listitem>

        <listitem>
          <para>Shared Clipboard</para>
        </listitem>

        <listitem>
          <para>Guest configuration interface</para>
        </listitem>
      </itemizedlist></para>

    <para>The shared library contains a so called HGCM service. The guest HGCM
    clients establish connections to the service to call it. When calling a
    HGCM service the client supplies a function code and a number of
    parameters for the function.</para>

    <sect1>
      <title>Virtual hardware implementation</title>

      <para>HGCM uses the VMM virtual PCI device to exchange data between the
      guest and the host. The guest always acts as an initiator of requests. A
      request is constructed in the guest physical memory, which must be
      locked by the guest. The physical address is passed to the VMM device
      using a 32 bit <computeroutput>out edx, eax</computeroutput>
      instruction. The physical memory must be allocated below 4GB by 64 bit
      guests.</para>

      <para>The host parses the request header and data and queues the request
      for a host HGCM service. The guest continues execution and usually waits
      on a HGCM event semaphore.</para>

      <para>When the request has been processed by the HGCM service, the VMM
      device sets the completion flag in the request header, sets the HGCM
      event and raises an IRQ for the guest. The IRQ handler signals the HGCM
      event semaphore and all HGCM callers check the completion flag in the
      corresponding request header. If the flag is set, the request is
      considered completed.</para>
    </sect1>

    <sect1>
      <title>Protocol specification</title>

      <para>The HGCM protocol definitions are contained in the
      <computeroutput>VBox/VBoxGuest.h</computeroutput></para>

      <sect2>
        <title>Request header</title>

        <para>HGCM request structures contains a generic header
        (VMMDevHGCMRequestHeader): <table>
            <title>HGCM Request Generic Header</title>

            <tgroup cols="2">
              <tbody>
                <row>
                  <entry><emphasis role="bold">Name</emphasis></entry>

                  <entry><emphasis role="bold">Description</emphasis></entry>
                </row>

                <row>
                  <entry>size</entry>

                  <entry>Size of the entire request.</entry>
                </row>

                <row>
                  <entry>version</entry>

                  <entry>Version of the header, must be set to
                  <computeroutput>0x10001</computeroutput>.</entry>
                </row>

                <row>
                  <entry>type</entry>

                  <entry>Type of the request.</entry>
                </row>

                <row>
                  <entry>rc</entry>

                  <entry>HGCM return code, which will be set by the VMM
                  device.</entry>
                </row>

                <row>
                  <entry>reserved1</entry>

                  <entry>A reserved field 1.</entry>
                </row>

                <row>
                  <entry>reserved2</entry>

                  <entry>A reserved field 2.</entry>
                </row>

                <row>
                  <entry>flags</entry>

                  <entry>HGCM flags, set by the VMM device.</entry>
                </row>

                <row>
                  <entry>result</entry>

                  <entry>The HGCM result code, set by the VMM device.</entry>
                </row>
              </tbody>
            </tgroup>
          </table> <note>
            <itemizedlist>
              <listitem>
                <para>All fields are 32 bit.</para>
              </listitem>

              <listitem>
                <para>Fields from <computeroutput>size</computeroutput> to
                <computeroutput>reserved2</computeroutput> are a standard VMM
                device request header, which is used for other interfaces as
                well.</para>
              </listitem>
            </itemizedlist>
          </note></para>

        <para>The <emphasis role="bold">type</emphasis> field indicates the
        type of the HGCM request: <table>
            <title>Request Types</title>

            <tgroup cols="2">
              <tbody>
                <row>
                  <entry><emphasis role="bold">Name (decimal
                  value)</emphasis></entry>

                  <entry><emphasis role="bold">Description</emphasis></entry>
                </row>

                <row>
                  <entry>VMMDevReq_HGCMConnect
                  (<computeroutput>60</computeroutput>)</entry>

                  <entry>Connect to a HGCM service.</entry>
                </row>

                <row>
                  <entry>VMMDevReq_HGCMDisconnect
                  (<computeroutput>61</computeroutput>)</entry>

                  <entry>Disconnect from the service.</entry>
                </row>

                <row>
                  <entry>VMMDevReq_HGCMCall32
                  (<computeroutput>62</computeroutput>)</entry>

                  <entry>Call a HGCM function using the 32 bit
                  interface.</entry>
                </row>

                <row>
                  <entry>VMMDevReq_HGCMCall64
                  (<computeroutput>63</computeroutput>)</entry>

                  <entry>Call a HGCM function using the 64 bit
                  interface.</entry>
                </row>

                <row>
                  <entry>VMMDevReq_HGCMCancel
                  (<computeroutput>64</computeroutput>)</entry>

                  <entry>Cancel a HGCM request currently being processed by a
                  host HGCM service.</entry>
                </row>
              </tbody>
            </tgroup>
          </table></para>

        <para>The <emphasis role="bold">flags</emphasis> field may contain:
        <table>
            <title>Flags</title>

            <tgroup cols="2">
              <tbody>
                <row>
                  <entry><emphasis role="bold">Name (hexadecimal
                  value)</emphasis></entry>

                  <entry><emphasis role="bold">Description</emphasis></entry>
                </row>

                <row>
                  <entry>VBOX_HGCM_REQ_DONE
                  (<computeroutput>0x00000001</computeroutput>)</entry>

                  <entry>The request has been processed by the host
                  service.</entry>
                </row>

                <row>
                  <entry>VBOX_HGCM_REQ_CANCELLED
                  (<computeroutput>0x00000002</computeroutput>)</entry>

                  <entry>This request was cancelled.</entry>
                </row>
              </tbody>
            </tgroup>
          </table></para>
      </sect2>

      <sect2>
        <title>Connect</title>

        <para>The connection request must be issued by the guest HGCM client
        before it can call the HGCM service (VMMDevHGCMConnect): <table>
            <title>Connect request</title>

            <tgroup cols="2">
              <tbody>
                <row>
                  <entry><emphasis role="bold">Name</emphasis></entry>

                  <entry><emphasis role="bold">Description</emphasis></entry>
                </row>

                <row>
                  <entry>header</entry>

                  <entry>The generic HGCM request header with type equal to
                  VMMDevReq_HGCMConnect
                  (<computeroutput>60</computeroutput>).</entry>
                </row>

                <row>
                  <entry>type</entry>

                  <entry>The type of the service location information (32
                  bit).</entry>
                </row>

                <row>
                  <entry>location</entry>

                  <entry>The service location information (128 bytes).</entry>
                </row>

                <row>
                  <entry>clientId</entry>

                  <entry>The client identifier assigned to the connecting
                  client by the HGCM subsystem (32 bit).</entry>
                </row>
              </tbody>
            </tgroup>
          </table> The <emphasis role="bold">type</emphasis> field tells the
        HGCM how to look for the requested service: <table>
            <title>Location Information Types</title>

            <tgroup cols="2">
              <tbody>
                <row>
                  <entry><emphasis role="bold">Name (hexadecimal
                  value)</emphasis></entry>

                  <entry><emphasis role="bold">Description</emphasis></entry>
                </row>

                <row>
                  <entry>VMMDevHGCMLoc_LocalHost
                  (<computeroutput>0x1</computeroutput>)</entry>

                  <entry>The requested service is a shared library located on
                  the host and the location information contains the library
                  name.</entry>
                </row>

                <row>
                  <entry>VMMDevHGCMLoc_LocalHost_Existing
                  (<computeroutput>0x2</computeroutput>)</entry>

                  <entry>The requested service is a preloaded one and the
                  location information contains the service name.</entry>
                </row>
              </tbody>
            </tgroup>
          </table> <note>
            <para>Currently preloaded HGCM services are hard-coded in
            VirtualBox: <itemizedlist>
                <listitem>
                  <para>VBoxSharedFolders</para>
                </listitem>

                <listitem>
                  <para>VBoxSharedClipboard</para>
                </listitem>

                <listitem>
                  <para>VBoxGuestPropSvc</para>
                </listitem>

                <listitem>
                  <para>VBoxSharedOpenGL</para>
                </listitem>
              </itemizedlist></para>
          </note> There is no difference between both types of HGCM services,
        only the location mechanism is different.</para>

        <para>The client identifier is returned by the host and must be used
        in all subsequent requests by the client.</para>
      </sect2>

      <sect2>
        <title>Disconnect</title>

        <para>This request disconnects the client and makes the client
        identifier invalid (VMMDevHGCMDisconnect): <table>
            <title>Disconnect request</title>

            <tgroup cols="2">
              <tbody>
                <row>
                  <entry><emphasis role="bold">Name</emphasis></entry>

                  <entry><emphasis role="bold">Description</emphasis></entry>
                </row>

                <row>
                  <entry>header</entry>

                  <entry>The generic HGCM request header with type equal to
                  VMMDevReq_HGCMDisconnect
                  (<computeroutput>61</computeroutput>).</entry>
                </row>

                <row>
                  <entry>clientId</entry>

                  <entry>The client identifier previously returned by the
                  connect request (32 bit).</entry>
                </row>
              </tbody>
            </tgroup>
          </table></para>
      </sect2>

      <sect2>
        <title>Call32 and Call64</title>

        <para>Calls the HGCM service entry point (VMMDevHGCMCall) using 32 bit
        or 64 bit addresses: <table>
            <title>Call request</title>

            <tgroup cols="2">
              <tbody>
                <row>
                  <entry><emphasis role="bold">Name</emphasis></entry>

                  <entry><emphasis role="bold">Description</emphasis></entry>
                </row>

                <row>
                  <entry>header</entry>

                  <entry>The generic HGCM request header with type equal to
                  either VMMDevReq_HGCMCall32
                  (<computeroutput>62</computeroutput>) or
                  VMMDevReq_HGCMCall64
                  (<computeroutput>63</computeroutput>).</entry>
                </row>

                <row>
                  <entry>clientId</entry>

                  <entry>The client identifier previously returned by the
                  connect request (32 bit).</entry>
                </row>

                <row>
                  <entry>function</entry>

                  <entry>The function code to be processed by the service (32
                  bit).</entry>
                </row>

                <row>
                  <entry>cParms</entry>

                  <entry>The number of following parameters (32 bit). This
                  value is 0 if the function requires no parameters.</entry>
                </row>

                <row>
                  <entry>parms</entry>

                  <entry>An array of parameter description structures
                  (HGCMFunctionParameter32 or
                  HGCMFunctionParameter64).</entry>
                </row>
              </tbody>
            </tgroup>
          </table></para>

        <para>The 32 bit parameter description (HGCMFunctionParameter32)
        consists of 32 bit type field and 8 bytes of an opaque value, so 12
        bytes in total. The 64 bit variant (HGCMFunctionParameter64) consists
        of the type and 12 bytes of a value, so 16 bytes in total.</para>

        <para><table>
            <title>Parameter types</title>

            <tgroup cols="2">
              <tbody>
                <row>
                  <entry><emphasis role="bold">Type</emphasis></entry>

                  <entry><emphasis role="bold">Format of the
                  value</emphasis></entry>
                </row>

                <row>
                  <entry>VMMDevHGCMParmType_32bit (1)</entry>

                  <entry>A 32 bit value.</entry>
                </row>

                <row>
                  <entry>VMMDevHGCMParmType_64bit (2)</entry>

                  <entry>A 64 bit value.</entry>
                </row>

                <row>
                  <entry>VMMDevHGCMParmType_PhysAddr (3)</entry>

                  <entry>A 32 bit size followed by a 32 bit or 64 bit guest
                  physical address.</entry>
                </row>

                <row>
                  <entry>VMMDevHGCMParmType_LinAddr (4)</entry>

                  <entry>A 32 bit size followed by a 32 bit or 64 bit guest
                  linear address. The buffer is used both for guest to host
                  and for host to guest data.</entry>
                </row>

                <row>
                  <entry>VMMDevHGCMParmType_LinAddr_In (5)</entry>

                  <entry>Same as VMMDevHGCMParmType_LinAddr but the buffer is
                  used only for host to guest data.</entry>
                </row>

                <row>
                  <entry>VMMDevHGCMParmType_LinAddr_Out (6)</entry>

                  <entry>Same as VMMDevHGCMParmType_LinAddr but the buffer is
                  used only for guest to host data.</entry>
                </row>

                <row>
                  <entry>VMMDevHGCMParmType_LinAddr_Locked (7)</entry>

                  <entry>Same as VMMDevHGCMParmType_LinAddr but the buffer is
                  already locked by the guest.</entry>
                </row>

                <row>
                  <entry>VMMDevHGCMParmType_LinAddr_Locked_In (1)</entry>

                  <entry>Same as VMMDevHGCMParmType_LinAddr_In but the buffer
                  is already locked by the guest.</entry>
                </row>

                <row>
                  <entry>VMMDevHGCMParmType_LinAddr_Locked_Out (1)</entry>

                  <entry>Same as VMMDevHGCMParmType_LinAddr_Out but the buffer
                  is already locked by the guest.</entry>
                </row>
              </tbody>
            </tgroup>
          </table></para>

        <para>The</para>
      </sect2>

      <sect2>
        <title>Cancel</title>

        <para>This request cancels a call request (VMMDevHGCMCancel): <table>
            <title>Cancel request</title>

            <tgroup cols="2">
              <tbody>
                <row>
                  <entry><emphasis role="bold">Name</emphasis></entry>

                  <entry><emphasis role="bold">Description</emphasis></entry>
                </row>

                <row>
                  <entry>header</entry>

                  <entry>The generic HGCM request header with type equal to
                  VMMDevReq_HGCMCancel
                  (<computeroutput>64</computeroutput>).</entry>
                </row>
              </tbody>
            </tgroup>
          </table></para>
      </sect2>
    </sect1>

    <sect1>
      <title>Guest software interface</title>

      <para>The guest HGCM clients can call HGCM services from both drivers
      and applications.</para>

      <sect2>
        <title>The guest driver interface</title>

        <para>The driver interface is implemented in the VirtualBox guest
        additions driver (VBoxGuest), which works with the VMM virtual device.
        Drivers must use the VBox Guest Library (VBGL), which provides an API
        for HGCM clients (<computeroutput>VBox/VBoxGuestLib.h</computeroutput>
        and <computeroutput>VBox/VBoxGuest.h</computeroutput>).</para>

        <para><screen>
DECLVBGL(int) VbglHGCMConnect (VBGLHGCMHANDLE *pHandle, VBoxGuestHGCMConnectInfo *pData);
          </screen> Connects to the service: <screen>
    VBoxGuestHGCMConnectInfo data;

    memset (&amp;data, sizeof (VBoxGuestHGCMConnectInfo));

    data.result   = VINF_SUCCESS;
    data.Loc.type = VMMDevHGCMLoc_LocalHost_Existing;
    strcpy (data.Loc.u.host.achName, "VBoxSharedFolders");

    rc = VbglHGCMConnect (&amp;handle, &amp;data);

    if (RT_SUCCESS (rc))
    {
        rc = data.result;
    }

    if (RT_SUCCESS (rc))
    {
        /* Get the assigned client identifier. */
        ulClientID = data.u32ClientID;
    }
          </screen></para>

        <para><screen>
DECLVBGL(int) VbglHGCMDisconnect (VBGLHGCMHANDLE handle, VBoxGuestHGCMDisconnectInfo *pData);
          </screen> Disconnects from the service. <screen>
    VBoxGuestHGCMDisconnectInfo data;

    RtlZeroMemory (&amp;data, sizeof (VBoxGuestHGCMDisconnectInfo));

    data.result      = VINF_SUCCESS;
    data.u32ClientID = ulClientID;

    rc = VbglHGCMDisconnect (handle, &amp;data);
          </screen></para>

        <para><screen>
DECLVBGL(int) VbglHGCMCall (VBGLHGCMHANDLE handle, VBoxGuestHGCMCallInfo *pData, uint32_t cbData);
          </screen> Calls a function in the service. <screen>
typedef struct _VBoxSFRead
{
    VBoxGuestHGCMCallInfo callInfo;

    /** pointer, in: SHFLROOT
     * Root handle of the mapping which name is queried.
     */
    HGCMFunctionParameter root;

    /** value64, in:
     * SHFLHANDLE of object to read from.
     */
    HGCMFunctionParameter handle;

    /** value64, in:
     * Offset to read from.
     */
    HGCMFunctionParameter offset;

    /** value64, in/out:
     * Bytes to read/How many were read.
     */
    HGCMFunctionParameter cb;

    /** pointer, out:
     * Buffer to place data to.
     */
    HGCMFunctionParameter buffer;

} VBoxSFRead;

/** Number of parameters */
#define SHFL_CPARMS_READ (5)

...

    VBoxSFRead data;

    /* The call information. */
    data.callInfo.result      = VINF_SUCCESS;     /* Will be returned by HGCM. */
    data.callInfo.u32ClientID = ulClientID;       /* Client identifier. */
    data.callInfo.u32Function = SHFL_FN_READ;     /* The function code. */
    data.callInfo.cParms      = SHFL_CPARMS_READ; /* Number of parameters. */

    /* Initialize parameters. */
    data.root.type                      = VMMDevHGCMParmType_32bit;
    data.root.u.value32                 = pMap-&gt;root;

    data.handle.type                    = VMMDevHGCMParmType_64bit;
    data.handle.u.value64               = hFile;

    data.offset.type                    = VMMDevHGCMParmType_64bit;
    data.offset.u.value64               = offset;

    data.cb.type                        = VMMDevHGCMParmType_32bit;
    data.cb.u.value32                   = *pcbBuffer;

    data.buffer.type                    = VMMDevHGCMParmType_LinAddr_Out;
    data.buffer.u.Pointer.size          = *pcbBuffer;
    data.buffer.u.Pointer.u.linearAddr  = (uintptr_t)pBuffer;

    rc = VbglHGCMCall (handle, &amp;data.callInfo, sizeof (data));

    if (RT_SUCCESS (rc))
    {
        rc = data.callInfo.result;
        *pcbBuffer = data.cb.u.value32; /* This is returned by the HGCM service. */
    }
          </screen></para>
      </sect2>

      <sect2>
        <title>Guest application interface</title>

        <para>Applications call the VirtualBox Guest Additions driver to
        utilize the HGCM interface. There are IOCTL's which correspond to the
        <computeroutput>Vbgl*</computeroutput> functions: <itemizedlist>
            <listitem>
              <para><computeroutput>VBOXGUEST_IOCTL_HGCM_CONNECT</computeroutput></para>
            </listitem>

            <listitem>
              <para><computeroutput>VBOXGUEST_IOCTL_HGCM_DISCONNECT</computeroutput></para>
            </listitem>

            <listitem>
              <para><computeroutput>VBOXGUEST_IOCTL_HGCM_CALL</computeroutput></para>
            </listitem>
          </itemizedlist></para>

        <para>These IOCTL's get the same input buffer as
        <computeroutput>VbglHGCM*</computeroutput> functions and the output
        buffer has the same format as the input buffer. The same address can
        be used as the input and output buffers.</para>

        <para>For example see the guest part of shared clipboard, which runs
        as an application and uses the HGCM interface.</para>
      </sect2>
    </sect1>

    <sect1>
      <title>HGCM Service Implementation</title>

      <para>The HGCM service is a shared library with a specific set of entry
      points. The library must export the
      <computeroutput>VBoxHGCMSvcLoad</computeroutput> entry point: <screen>
extern "C" DECLCALLBACK(DECLEXPORT(int)) VBoxHGCMSvcLoad (VBOXHGCMSVCFNTABLE *ptable)
      </screen></para>

      <para>The service must check the
      <computeroutput>ptable-&gt;cbSize</computeroutput> and
      <computeroutput>ptable-&gt;u32Version</computeroutput> fields of the
      input structure and fill the remaining fields with function pointers of
      entry points and the size of the required client buffer size.</para>

      <para>The HGCM service gets a dedicated thread, which calls service
      entry points synchronously, that is the service will be called again
      only when a previous call has returned. However, the guest calls can be
      processed asynchronously. The service must call a completion callback
      when the operation is actually completed. The callback can be issued
      from another thread as well.</para>

      <para>Service entry points are listed in the
      <computeroutput>VBox/hgcmsvc.h</computeroutput> in the
      <computeroutput>VBOXHGCMSVCFNTABLE</computeroutput> structure. <table>
          <title>Service entry points</title>

          <tgroup cols="2">
            <tbody>
              <row>
                <entry><emphasis role="bold">Entry</emphasis></entry>

                <entry><emphasis role="bold">Description</emphasis></entry>
              </row>

              <row>
                <entry>pfnUnload</entry>

                <entry>The service is being unloaded.</entry>
              </row>

              <row>
                <entry>pfnConnect</entry>

                <entry>A client <computeroutput>u32ClientID</computeroutput>
                is connected to the service. The
                <computeroutput>pvClient</computeroutput> parameter points to
                an allocated memory buffer which can be used by the service to
                store the client information.</entry>
              </row>

              <row>
                <entry>pfnDisconnect</entry>

                <entry>A client is being disconnected.</entry>
              </row>

              <row>
                <entry>pfnCall</entry>

                <entry>A guest client calls a service function. The
                <computeroutput>callHandle</computeroutput> must be used in
                the VBOXHGCMSVCHELPERS::pfnCallComplete callback when the call
                has been processed.</entry>
              </row>

              <row>
                <entry>pfnHostCall</entry>

                <entry>Called by the VirtualBox host components to perform
                functions which should be not accessible by the guest. Usually
                this entry point is used by VirtualBox to configure the
                service.</entry>
              </row>

              <row>
                <entry>pfnSaveState</entry>

                <entry>The VM state is being saved and the service must save
                relevant information using the SSM API
                (<computeroutput>VBox/ssm.h</computeroutput>).</entry>
              </row>

              <row>
                <entry>pfnLoadState</entry>

                <entry>The VM is being restored from the saved state and the
                service must load the saved information and be able to
                continue operations from the saved state.</entry>
              </row>
            </tbody>
          </tgroup>
        </table></para>
    </sect1>
  </chapter>

  <chapter id="rdpweb">
    <title>RDP Web Control</title>

    <para>The VirtualBox <emphasis>RDP Web Control</emphasis> (RDPWeb)
    provides remote access to a running VM. RDPWeb is a RDP (Remote Desktop
    Protocol) client based on Flash technology and can be used from a Web
    browser with a Flash plugin.</para>

    <sect1>
      <title>RDPWeb features</title>

      <para>RDPWeb is embedded into a Web page and can connect to VRDP server
      in order to displays the VM screen and pass keyboard and mouse events to
      the VM.</para>
    </sect1>

    <sect1>
      <title>RDPWeb reference</title>

      <para>RDPWeb consists of two required components:<itemizedlist>
          <listitem>
            <para>Flash movie
            <computeroutput>RDPClientUI.swf</computeroutput></para>
          </listitem>

          <listitem>
            <para>JavaScript helpers
            <computeroutput>webclient.js</computeroutput></para>
          </listitem>
        </itemizedlist></para>

      <para>The VirtualBox SDK contains sample HTML code
      including:<itemizedlist>
          <listitem>
            <para>JavaScript library for embedding Flash content
            <computeroutput>SWFObject.js</computeroutput></para>
          </listitem>

          <listitem>
            <para>Sample HTML page
            <computeroutput>webclient3.html</computeroutput></para>
          </listitem>
        </itemizedlist></para>

      <sect2>
        <title>RDPWeb functions</title>

        <para><computeroutput>RDPClientUI.swf</computeroutput> and
        <computeroutput>webclient.js</computeroutput> work with each other.
        JavaScript code is responsible for a proper SWF initialization,
        delivering mouse events to the SWF and processing resize requests from
        the SWF. On the other hand, the SWF contains a few JavaScript callable
        methods, which are used both from
        <computeroutput>webclient.js</computeroutput> and the user HTML
        page.</para>

        <sect3>
          <title>JavaScript functions</title>

          <para><computeroutput>webclient.js</computeroutput> contains helper
          functions. In the following table ElementId refers to an HTML
          element name or attribute, and Element to the HTML element itself.
          HTML code<programlisting>
    &lt;div id="FlashRDP"&gt;
    &lt;/div&gt;
</programlisting> would have ElementId equal to FlashRDP and Element equal to
          the div element.</para>

          <para><itemizedlist>
              <listitem>
                <programlisting>RDPWebClient.embedSWF(SWFFileName, ElementId)</programlisting>

                <para>Uses SWFObject library to replace the HTML element with
                the Flash movie.</para>
              </listitem>

              <listitem>
                <programlisting>RDPWebClient.isRDPWebControlById(ElementId)</programlisting>

                <para>Returns true if the given id refers to a RDPWeb Flash
                element.</para>
              </listitem>

              <listitem>
                <programlisting>RDPWebClient.isRDPWebControlByElement(Element)</programlisting>

                <para>Returns true if the given element is a RDPWeb Flash
                element.</para>
              </listitem>

              <listitem>
                <programlisting>RDPWebClient.getFlashById(ElementId)</programlisting>

                <para>Returns an element, which is referenced by the given id.
                This function will try to resolve any element, event if it is
                not a Flash movie.</para>
              </listitem>
            </itemizedlist></para>
        </sect3>

        <sect3>
          <title>Flash methods callable from JavaScript</title>

          <para><computeroutput>RDPWebClienUI.swf</computeroutput> methods can
          be called directly from JavaScript code on a HTML page.</para>

          <itemizedlist>
            <listitem>
              <para>getProperty(Name)</para>
            </listitem>

            <listitem>
              <para>setProperty(Name)</para>
            </listitem>

            <listitem>
              <para>connect()</para>
            </listitem>

            <listitem>
              <para>disconnect()</para>
            </listitem>

            <listitem>
              <para>keyboardSendCAD()</para>
            </listitem>
          </itemizedlist>
        </sect3>

        <sect3>
          <title>Flash JavaScript callbacks</title>

          <para><computeroutput>RDPWebClienUI.swf</computeroutput> calls
          JavaScript functions provided by the HTML page.</para>
        </sect3>
      </sect2>

      <sect2>
        <title>Embedding RDPWeb in an HTML page</title>

        <para>It is necessary to include
        <computeroutput>webclient.js</computeroutput> helper script. If
        SWFObject library is used, the
        <computeroutput>swfobject.js</computeroutput> must be also included
        and RDPWeb flash content can be embedded to a Web page using dynamic
        HTML. The HTML must include a "placeholder", which consists of 2
        <computeroutput>div</computeroutput> elements.</para>
      </sect2>
    </sect1>

    <sect1>
      <title>RDPWeb change log</title>

      <sect2>
        <title>Version 1.2.28</title>

        <itemizedlist>
          <listitem>
            <para><computeroutput>keyboardLayout</computeroutput>,
            <computeroutput>keyboardLayouts</computeroutput>,
            <computeroutput>UUID</computeroutput> properties.</para>
          </listitem>

          <listitem>
            <para>Support for German keyboard layout on the client.</para>
          </listitem>

          <listitem>
            <para>Rebranding to Oracle.</para>
          </listitem>
        </itemizedlist>
      </sect2>

      <sect2>
        <title>Version 1.1.26</title>

        <itemizedlist>
          <listitem>
            <para><computeroutput>webclient.js</computeroutput> is a part of
            the distribution package.</para>
          </listitem>

          <listitem>
            <para><computeroutput>lastError</computeroutput> property.</para>
          </listitem>

          <listitem>
            <para><computeroutput>keyboardSendScancodes</computeroutput> and
            <computeroutput>keyboardSendCAD</computeroutput> methods.</para>
          </listitem>
        </itemizedlist>
      </sect2>

      <sect2>
        <title>Version 1.0.24</title>

        <itemizedlist>
          <listitem>
            <para>Initial release.</para>
          </listitem>
        </itemizedlist>
      </sect2>
    </sect1>
  </chapter>

  <chapter id="vbox-auth">
    <title>VirtualBox external authentication modules</title>

    <para>VirtualBox supports arbitrary external modules to perform
    authentication. The module is used when the authentication method is set
    to "external" for a particular VM VRDE access and the library was
    specified with <computeroutput>VBoxManage setproperty
    vrdeauthlibrary</computeroutput>. Web service also use the authentication
    module which was specified with <computeroutput>VBoxManage setproperty
    websrvauthlibrary</computeroutput>.</para>

    <para>This library will be loaded by the VM or web service process on
    demand, i.e. when the first remote desktop connection is made by a client
    or when a client that wants to use the web service logs on.</para>

    <para>External authentication is the most flexible as the external handler
    can both choose to grant access to everyone (like the "null"
    authentication method would) and delegate the request to the guest
    authentication component. When delegating the request to the guest
    component, the handler will still be called afterwards with the option to
    override the result.</para>

    <para>An authentication library is required to implement exactly one entry
    point:</para>

    <screen>#include "VBoxAuth.h"

/**
 * Authentication library entry point.
 *
 * Parameters:
 *
 *   szCaller         The name of the component which calls the library (UTF8).
 *   pUuid            Pointer to the UUID of the accessed virtual machine. Can be NULL.
 *   guestJudgement   Result of the guest authentication.
 *   szUser           User name passed in by the client (UTF8).
 *   szPassword       Password passed in by the client (UTF8).
 *   szDomain         Domain passed in by the client (UTF8).
 *   fLogon           Boolean flag. Indicates whether the entry point is called
 *                    for a client logon or the client disconnect.
 *   clientId         Server side unique identifier of the client.
 *
 * Return code:
 *
 *   AuthResultAccessDenied    Client access has been denied.
 *   AuthResultAccessGranted   Client has the right to use the
 *                             virtual machine.
 *   AuthResultDelegateToGuest Guest operating system must
 *                             authenticate the client and the
 *                             library must be called again with
 *                             the result of the guest
 *                             authentication.
 *
 * Note: When 'fLogon' is 0, only pszCaller, pUuid and clientId are valid and the return
 *       code is ignored.
 */
AuthResult AUTHCALL AuthEntry(
    const char *szCaller,
    PAUTHUUID pUuid,
    AuthGuestJudgement guestJudgement,
    const char *szUser,
    const char *szPassword
    const char *szDomain
    int fLogon,
    unsigned clientId)
{
    /* Process request against your authentication source of choice. */
    // if (authSucceeded(...))
    //     return AuthResultAccessGranted;
    return AuthResultAccessDenied;
}</screen>

    <para>A note regarding the UUID implementation of the
    <computeroutput>pUuid</computeroutput> argument: VirtualBox uses a
    consistent binary representation of UUIDs on all platforms. For this
    reason the integer fields comprising the UUID are stored as little endian
    values. If you want to pass such UUIDs to code which assumes that the
    integer fields are big endian (often also called network byte order), you
    need to adjust the contents of the UUID to e.g. achieve the same string
    representation. The required changes are:<itemizedlist>
        <listitem>
          <para>reverse the order of byte 0, 1, 2 and 3</para>
        </listitem>

        <listitem>
          <para>reverse the order of byte 4 and 5</para>
        </listitem>

        <listitem>
          <para>reverse the order of byte 6 and 7.</para>
        </listitem>
      </itemizedlist>Using this conversion you will get identical results when
    converting the binary UUID to the string representation.</para>

    <para>The <computeroutput>guestJudgement</computeroutput> argument
    contains information about the guest authentication status. For the first
    call, it is always set to
    <computeroutput>AuthGuestNotAsked</computeroutput>. In case the
    <computeroutput>AuthEntry</computeroutput> function returns
    <computeroutput>AuthResultDelegateToGuest</computeroutput>, a guest
    authentication will be attempted and another call to the
    <computeroutput>AuthEntry</computeroutput> is made with its result. This
    can be either granted / denied or no judgement (the guest component chose
    for whatever reason to not make a decision). In case there is a problem
    with the guest authentication module (e.g. the Additions are not installed
    or not running or the guest did not respond within a timeout), the "not
    reacted" status will be returned.</para>
  </chapter>

  <chapter id="javaapi">
    <title>Using Java API</title>

    <sect1>
      <title>Introduction</title>

      <para>VirtualBox can be controlled by a Java API, both locally
      (COM/XPCOM) and from remote (SOAP) clients. As with the Python bindings,
      a generic glue layer tries to hide all platform differences, allowing
      for source and binary compatibility on different platforms.</para>
    </sect1>

    <sect1>
      <title>Requirements</title>

      <para>To use the Java bindings, there are certain requirements depending
      on the platform. First of all, you need JDK 1.5 (Java 5) or later. Also
      please make sure that the version of the VirtualBox API .jar file
      exactly matches the version of VirtualBox you use. To avoid confusion,
      the VirtualBox API provides versioning in the Java package name, e.g.
      the package is named <computeroutput>org.virtualbox_3_2</computeroutput>
      for VirtualBox version 3.2. <itemizedlist>
          <listitem>
            <para><emphasis role="bold">XPCOM:</emphasis> - for all platforms,
            but Microsoft Windows. A Java bridge based on JavaXPCOM is shipped
            with VirtualBox. The classpath must contain
            <computeroutput>vboxjxpcom.jar</computeroutput> and the
            <computeroutput>vbox.home</computeroutput> property must be set to
            location where the VirtualBox binaries are. Please make sure that
            the JVM bitness matches bitness of VirtualBox you use as the XPCOM
            bridge relies on native libraries.</para>

            <para>Start your application like this: <programlisting>
 java -cp vboxjxpcom.jar -Dvbox.home=/opt/virtualbox MyProgram
              </programlisting></para>
          </listitem>

          <listitem>
            <para><emphasis role="bold">COM:</emphasis> - for Microsoft
            Windows. We rely on <computeroutput>Jacob</computeroutput> - a
            generic Java to COM bridge - which has to be installed seperately.
            See <ulink
            url="http://sourceforge.net/projects/jacob-project/">http://sourceforge.net/projects/jacob-project/</ulink>
            for installation instructions. Also, the VirtualBox provided
            <computeroutput>vboxjmscom.jar</computeroutput> must be in the
            class path.</para>

            <para>Start your application like this: <programlisting>
 java -cp vboxjmscom.jar;c:\jacob\jacob.jar -Djava.library.path=c:\jacob MyProgram
              </programlisting></para>
          </listitem>

          <listitem>
            <para><emphasis role="bold">SOAP</emphasis> - all platforms. Java
            6 is required, as it comes with builtin support for SOAP via the
            JAX-WS library. Also, the VirtualBox provided
            <computeroutput>vbojws.jar</computeroutput> must be in the class
            path. In the SOAP case it's possible to create several
            VirtualBoxManager instances to communicate with multiple
            VirtualBox hosts.</para>

            <para>Start your application like this: <programlisting>
 java -cp vboxjws.jar MyProgram
              </programlisting></para>
          </listitem>
        </itemizedlist></para>

      <para>Exception handling is also generalized by the generic glue layer,
      so that all methods could throw
      <computeroutput>VBoxException</computeroutput> containing human-readable
      text message (see <computeroutput>getMessage()</computeroutput> method)
      along with wrapped original exception (see
      <computeroutput>getWrapped()</computeroutput> method).</para>
    </sect1>

    <sect1>
      <title>Example</title>

      <para>This example shows a simple use case of the Java API. Differences
      for SOAP vs. local version are minimal, and limited to the connection
      setup phase (see <computeroutput>ws</computeroutput> variable). In the
      SOAP case it's possible to create several VirtualBoxManager instances to
      communicate with multiple VirtualBox hosts. <programlisting>
          import org.virtualbox_3_3.*;
          ....
          VirtualBoxManager mgr = VirtualBoxManager.createInstance(null);
          boolean ws = false; // or true, if we need the SOAP version
          if (ws)
          {
              String url = "http://myhost:18034";
              String user = "test";
              String passwd = "test";
              mgr.connect(url, user, passwd);
          }
          IVirtualBox vbox = mgr.getVBox();
          System.out.println("VirtualBox version: " + vbox.getVersion() + "\n");
          // get first VM name
          String m =  vbox.getMachines().get(0).getName();
          System.out.println("\nAttempting to start VM '" + m + "'");
          // start it
          mgr.startVm(m, null, 7000);

          if (ws)
              mgr.disconnect();

          mgr.cleanup();
        </programlisting> For more a complete example, see
      <computeroutput>TestVBox.java</computeroutput>, shipped with the
      SDK.</para>
    </sect1>
  </chapter>

  <chapter>
    <title>License information</title>

    <para>The sample code files shipped with the SDK are generally licensed
    liberally to make it easy for anyone to use this code for their own
    application code.</para>

    <para>The Java files under
    <computeroutput>bindings/webservice/java/jax-ws/</computeroutput> (library
    files for the object-oriented web service) are, by contrast, licensed
    under the GNU Lesser General Public License (LGPL) V2.1.</para>

    <para>See
    <computeroutput>sdk/bindings/webservice/java/jax-ws/src/COPYING.LIB</computeroutput>
    for the full text of the LGPL 2.1.</para>

    <para>When in doubt, please refer to the individual source code files
    shipped with this SDK.</para>
  </chapter>

  <chapter>
    <title>Main API change log</title>

    <para>Generally, VirtualBox will maintain API compatibility within a major
    release; a major release occurs when the first or the second of the three
    version components of VirtualBox change (that is, in the x.y.z scheme, a
    major release is one where x or y change, but not when only z
    changes).</para>

    <para>In other words, updates like those from 2.0.0 to 2.0.2 will not come
    with API breakages.</para>

    <para>Migration between major releases most likely will lead to API
    breakage, so please make sure you updated code accordingly. The OOWS Java
    wrappers enforce that mechanism by putting VirtualBox classes into
    version-specific packages such as
    <computeroutput>org.virtualbox_2_2</computeroutput>. This approach allows
    for connecting to multiple VirtualBox versions simultaneously from the
    same Java application.</para>

    <para>The following sections list incompatible changes that the Main API
    underwent since the original release of this SDK Reference with VirtualBox
    2.0. A change is deemed "incompatible" only if it breaks existing client
    code (e.g. changes in method parameter lists, renamed or removed
    interfaces and similar). In other words, the list does not contain new
    interfaces, methods or attributes or other changes that do not affect
    existing client code.</para>

    <sect1>
      <title>Incompatible API changes with version 4.2</title>

      <itemizedlist>
        <listitem>
          <para>Guest control APIs for executing guest processes, working with
          guest files or directories have been moved to the newly introduced
          <xref linkend="IGuestSession" xreflabel="IGuestSession" /> interface which
          can be created by calling <xref linkend="IGuest__createSession"
          xreflabel="IGuest::createSession()" />.</para>

          <para>A guest session will act as a
          guest user's impersonation so that the guest credentials only have to
          be provided when creating a new guest session. There can be up to 32
          guest sessions at once per VM, each session serving up to 2048 guest
          processes running or files opened.</para>

          <para>Instead of working with process or directory handles before
          version 4.2, there now are the dedicated interfaces
          <xref linkend="IGuestProcess" xreflabel="IGuestProcess" />,
          <xref linkend="IGuestDirectory" xreflabel="IGuestDirectory" /> and
          <xref linkend="IGuestFile" xreflabel="IGuestFile" />. To retrieve more
          information of a file system object the new interface
          <xref linkend="IGuestFsObjInfo" xreflabel="IGuestFsObjInfo" /> has been
          introduced.</para>

          <para>Even though the guest control API was changed it is backwards
          compatible so that it can be used with older installed Guest
          Additions. However, to use upcoming features like process termination
          or waiting for input / output new Guest Additions must be installed when
          these features got implemented.</para>

          <para>The following limitations apply:
            <itemizedlist>
              <listitem><para>The <xref linkend="IGuestFile" xreflabel="IGuestFile" />
                interface is not fully implemented yet.</para>
              </listitem>
              <listitem><para>The symbolic link APIs
                <xref linkend="IGuestSession__symlinkCreate"
                xreflabel="IGuestSession::symlinkCreate()" />,
                <xref linkend="IGuestSession__symlinkExists"
                xreflabel="IGuestSession::symlinkExists()" />,
                <xref linkend="IGuestSession__symlinkRead"
                xreflabel="IGuestSession::symlinkRead()" />,
                <xref linkend="IGuestSession__symlinkRemoveDirectory"
                xreflabel="IGuestSession::symlinkRemoveDirectory()" /> and
                <xref linkend="IGuestSession__symlinkRemoveFile"
                xreflabel="IGuestSession::symlinkRemoveFile()" /> are not
                implemented yet.</para>
              </listitem>
              <listitem><para>The directory APIs
                <xref linkend="IGuestSession__directoryRemove"
                xreflabel="IGuestSession::directoryRemove()" />,
                <xref linkend="IGuestSession__directoryRemoveRecursive"
                xreflabel="IGuestSession::directoryRemoveRecursive()" />,
                <xref linkend="IGuestSession__directoryRename"
                xreflabel="IGuestSession::directoryRename()" /> and
                <xref linkend="IGuestSession__directorySetACL"
                xreflabel="IGuestSession::directorySetACL()" /> are not
                implemented yet.</para>
              </listitem>
              <listitem><para>The temporary file creation API
                <xref linkend="IGuestSession__fileCreateTemp"
                xreflabel="IGuestSession::fileCreateTemp()" /> is not
                implemented yet.</para>
              </listitem>
              <listitem><para>Guest process termination via
                <xref linkend="IProcess__terminate"
                xreflabel="IProcess::terminate()" /> is not
                implemented yet.</para>
              </listitem>
              <listitem><para>Waiting for guest process output via
                <xref linkend="ProcessWaitForFlag__StdOut" xreflabel="ProcessWaitForFlag::StdOut" />
                and <xref linkend="ProcessWaitForFlag__StdErr" xreflabel="ProcessWaitForFlag::StdErr" />
                is not implemented yet.</para><para>To wait for process output, <xref linkend="IProcess__read"
                xreflabel="IProcess::read()" /> with appropriate flags still can be used to periodically
                check for new output data to arrive. Note that <xref linkend="ProcessCreateFlag__WaitForStdOut"
                xreflabel="ProcessCreateFlag::WaitForStdOut" /> and / or
                <xref linkend="ProcessCreateFlag__WaitForStdErr" xreflabel="ProcessCreateFlag::WaitForStdErr" />
                need to be specified when creating a guest process via <xref linkend="IGuestSession__processCreate"
                xreflabel="IGuestSession::processCreate()" /> or <xref linkend="IGuestSession__processCreateEx"
                xreflabel="IGuestSession::processCreateEx()" />.</para>
              </listitem>
              <listitem>
                <para>ACL (Access Control List) handling in general is not implemented yet.</para>
              </listitem>
            </itemizedlist>
          </para>
        </listitem>

        <listitem>
          <para>The <xref linkend="LockType" xreflabel="LockType" />
          enumeration now has an additional value <computeroutput>VM</computeroutput>
          which tells <xref linkend="IMachine__lockMachine"
          xreflabel="IMachine::lockMachine()" /> to create a full-blown
          object structure for running a VM. This was the previous behavior
          with <computeroutput>Write</computeroutput>, which now only creates
          the minimal object structure to save time and resources (at the
          moment the Console object is still created, but all sub-objects
          such as Display, Keyboard, Mouse, Guest are not.</para>
        </listitem>

        <listitem>
          <para>Machines can be put in groups (actually an array of groups).
          The primary group affects the default placement of files belonging
          to a VM. <xref linkend="IVirtualBox__createMachine"
          xreflabel="IVirtualBox::createMachine()"/> and
          <xref linkend="IVirtualBox__composeMachineFilename"
          xreflabel="IVirtualBox::composeMachineFilename()"/> have been
          adjusted accordingly, the former taking an array of groups as an
          additional parameter and the latter taking a group as an additional
          parameter. The create option handling has been changed for those two
          methods, too.</para>
        </listitem>

        <listitem>
          <para>The method IVirtualBox::findMedium() has been removed, since
          it provides a subset of the functionality of <xref linkend="IVirtualBox__openMedium"
          xreflabel="IVirtualBox::openMedium()" />.</para>
        </listitem>

        <listitem>
          <para>The use of acronyms in API enumeration, interface, attribute
          and method names has been made much more consistent, previously they
          sometimes were lowercase and sometimes mixed case. They are now
          consistently all caps:<table>
          <title>Renamed identifiers in VirtualBox 4.2</title>

          <tgroup cols="2" style="verywide">
            <tbody>
              <row>
                <entry><emphasis role="bold">Old name</emphasis></entry>

                <entry><emphasis role="bold">New name</emphasis></entry>
              </row>
              <row>
                <entry>PointingHidType</entry>
                <entry><xref linkend="PointingHIDType" xreflabel="PointingHIDType"/></entry>
              </row>
              <row>
                <entry>KeyboardHidType</entry>
                <entry><xref linkend="KeyboardHIDType" xreflabel="KeyboardHIDType"/></entry>
              </row>
              <row>
                <entry>IPciAddress</entry>
                <entry><xref linkend="IPCIAddress" xreflabel="IPCIAddress"/></entry>
              </row>
              <row>
                <entry>IPciDeviceAttachment</entry>
                <entry><xref linkend="IPCIDeviceAttachment" xreflabel="IPCIDeviceAttachment"/></entry>
              </row>
              <row>
                <entry>IMachine::pointingHidType</entry>
                <entry><xref linkend="IMachine__pointingHIDType" xreflabel="IMachine::pointingHIDType"/></entry>
              </row>
              <row>
                <entry>IMachine::keyboardHidType</entry>
                <entry><xref linkend="IMachine__keyboardHIDType" xreflabel="IMachine::keyboardHIDType"/></entry>
              </row>
              <row>
                <entry>IMachine::hpetEnabled</entry>
                <entry><xref linkend="IMachine__HPETEnabled" xreflabel="IMachine::HPETEnabled"/></entry>
              </row>
              <row>
                <entry>IMachine::sessionPid</entry>
                <entry><xref linkend="IMachine__sessionPID" xreflabel="IMachine::sessionPID"/></entry>
              </row>
              <row>
                <entry>IMachine::ioCacheEnabled</entry>
                <entry><xref linkend="IMachine__IOCacheEnabled" xreflabel="IMachine::IOCacheEnabled"/></entry>
              </row>
              <row>
                <entry>IMachine::ioCacheSize</entry>
                <entry><xref linkend="IMachine__IOCacheSize" xreflabel="IMachine::IOCacheSize"/></entry>
              </row>
              <row>
                <entry>IMachine::pciDeviceAssignments</entry>
                <entry><xref linkend="IMachine__PCIDeviceAssignments" xreflabel="IMachine::PCIDeviceAssignments"/></entry>
              </row>
              <row>
                <entry>IMachine::attachHostPciDevice()</entry>
                <entry><xref linkend="IMachine__attachHostPCIDevice" xreflabel="IMachine::attachHostPCIDevice"/></entry>
              </row>
              <row>
                <entry>IMachine::detachHostPciDevice()</entry>
                <entry><xref linkend="IMachine__detachHostPCIDevice" xreflabel="IMachine::detachHostPCIDevice()"/></entry>
              </row>
              <row>
                <entry>IConsole::attachedPciDevices</entry>
                <entry><xref linkend="IConsole__attachedPCIDevices" xreflabel="IConsole::attachedPCIDevices"/></entry>
              </row>
              <row>
                <entry>IHostNetworkInterface::dhcpEnabled</entry>
                <entry><xref linkend="IHostNetworkInterface__DHCPEnabled" xreflabel="IHostNetworkInterface::DHCPEnabled"/></entry>
              </row>
              <row>
                <entry>IHostNetworkInterface::enableStaticIpConfig()</entry>
                <entry><xref linkend="IHostNetworkInterface__enableStaticIPConfig" xreflabel="IHostNetworkInterface::enableStaticIPConfig()"/></entry>
              </row>
              <row>
                <entry>IHostNetworkInterface::enableStaticIpConfigV6()</entry>
                <entry><xref linkend="IHostNetworkInterface__enableStaticIPConfigV6" xreflabel="IHostNetworkInterface::enableStaticIPConfigV6()"/></entry>
              </row>
              <row>
                <entry>IHostNetworkInterface::enableDynamicIpConfig()</entry>
                <entry><xref linkend="IHostNetworkInterface__enableDynamicIPConfig" xreflabel="IHostNetworkInterface::enableDynamicIPConfig()"/></entry>
              </row>
              <row>
                <entry>IHostNetworkInterface::dhcpRediscover()</entry>
                <entry><xref linkend="IHostNetworkInterface__DHCPRediscover" xreflabel="IHostNetworkInterface::DHCPRediscover()"/></entry>
              </row>
              <row>
                <entry>IHost::Acceleration3DAvailable</entry>
                <entry><xref linkend="IHost__acceleration3DAvailable" xreflabel="IHost::acceleration3DAvailable"/></entry>
              </row>
              <row>
                <entry>IGuestOSType::recommendedPae</entry>
                <entry><xref linkend="IGuestOSType__recommendedPAE" xreflabel="IGuestOSType::recommendedPAE"/></entry>
              </row>
              <row>
                <entry>IGuestOSType::recommendedDvdStorageController</entry>
                <entry><xref linkend="IGuestOSType__recommendedDVDStorageController" xreflabel="IGuestOSType::recommendedDVDStorageController"/></entry>
              </row>
              <row>
                <entry>IGuestOSType::recommendedDvdStorageBus</entry>
                <entry><xref linkend="IGuestOSType__recommendedDVDStorageBus" xreflabel="IGuestOSType::recommendedDVDStorageBus"/></entry>
              </row>
              <row>
                <entry>IGuestOSType::recommendedHdStorageController</entry>
                <entry><xref linkend="IGuestOSType__recommendedHDStorageController" xreflabel="IGuestOSType::recommendedHDStorageController"/></entry>
              </row>
              <row>
                <entry>IGuestOSType::recommendedHdStorageBus</entry>
                <entry><xref linkend="IGuestOSType__recommendedHDStorageBus" xreflabel="IGuestOSType::recommendedHDStorageBus"/></entry>
              </row>
              <row>
                <entry>IGuestOSType::recommendedUsbHid</entry>
                <entry><xref linkend="IGuestOSType__recommendedUSBHID" xreflabel="IGuestOSType::recommendedUSBHID"/></entry>
              </row>
              <row>
                <entry>IGuestOSType::recommendedHpet</entry>
                <entry><xref linkend="IGuestOSType__recommendedHPET" xreflabel="IGuestOSType::recommendedHPET"/></entry>
              </row>
              <row>
                <entry>IGuestOSType::recommendedUsbTablet</entry>
                <entry><xref linkend="IGuestOSType__recommendedUSBTablet" xreflabel="IGuestOSType::recommendedUSBTablet"/></entry>
              </row>
              <row>
                <entry>IGuestOSType::recommendedRtcUseUtc</entry>
                <entry><xref linkend="IGuestOSType__recommendedRTCUseUTC" xreflabel="IGuestOSType::recommendedRTCUseUTC"/></entry>
              </row>
              <row>
                <entry>IGuestOSType::recommendedUsb</entry>
                <entry><xref linkend="IGuestOSType__recommendedUSB" xreflabel="IGuestOSType::recommendedUSB"/></entry>
              </row>
              <row>
                <entry>INetworkAdapter::natDriver</entry>
                <entry><xref linkend="INetworkAdapter__NATEngine" xreflabel="INetworkAdapter::NATEngine"/></entry>
              </row>
              <row>
                <entry>IUSBController::enabledEhci</entry>
                <entry><xref linkend="IUSBController__enabledEHCI" xreflabel="IUSBController::enabledEHCI"/></entry>
              </row>
              <row>
                <entry>INATEngine::tftpPrefix</entry>
                <entry><xref linkend="INATEngine__TFTPPrefix" xreflabel="INATEngine::TFTPPrefix"/></entry>
              </row>
              <row>
                <entry>INATEngine::tftpBootFile</entry>
                <entry><xref linkend="INATEngine__TFTPBootFile" xreflabel="INATEngine::TFTPBootFile"/></entry>
              </row>
              <row>
                <entry>INATEngine::tftpNextServer</entry>
                <entry><xref linkend="INATEngine__TFTPNextServer" xreflabel="INATEngine::TFTPNextServer"/></entry>
              </row>
              <row>
                <entry>INATEngine::dnsPassDomain</entry>
                <entry><xref linkend="INATEngine__DNSPassDomain" xreflabel="INATEngine::DNSPassDomain"/></entry>
              </row>
              <row>
                <entry>INATEngine::dnsProxy</entry>
                <entry><xref linkend="INATEngine__DNSProxy" xreflabel="INATEngine::DNSProxy"/></entry>
              </row>
              <row>
                <entry>INATEngine::dnsUseHostResolver</entry>
                <entry><xref linkend="INATEngine__DNSUseHostResolver" xreflabel="INATEngine::DNSUseHostResolver"/></entry>
              </row>
              <row>
                <entry>VBoxEventType::OnHostPciDevicePlug</entry>
                <entry><xref linkend="VBoxEventType__OnHostPCIDevicePlug" xreflabel="VBoxEventType::OnHostPCIDevicePlug"/></entry>
              </row>
              <row>
                <entry>ICPUChangedEvent::cpu</entry>
                <entry><xref linkend="ICPUChangedEvent__CPU" xreflabel="ICPUChangedEvent::CPU"/></entry>
              </row>
              <row>
                <entry>INATRedirectEvent::hostIp</entry>
                <entry><xref linkend="INATRedirectEvent__hostIP" xreflabel="INATRedirectEvent::hostIP"/></entry>
              </row>
              <row>
                <entry>INATRedirectEvent::guestIp</entry>
                <entry><xref linkend="INATRedirectEvent__guestIP" xreflabel="INATRedirectEvent::guestIP"/></entry>
              </row>
              <row>
                <entry>IHostPciDevicePlugEvent</entry>
                <entry><xref linkend="IHostPCIDevicePlugEvent" xreflabel="IHostPCIDevicePlugEvent"/></entry>
              </row>
            </tbody>
          </tgroup></table></para>
        </listitem>
      </itemizedlist>
    </sect1>


    <sect1>
      <title>Incompatible API changes with version 4.1</title>

      <itemizedlist>
        <listitem>
          <para>The method <xref linkend="IAppliance__importMachines"
          xreflabel="IAppliance::importMachines()" /> has one more parameter
          now, which allows to configure the import process in more detail.
          </para>
        </listitem>

        <listitem>
          <para>The method <xref linkend="IVirtualBox__openMedium"
          xreflabel="IVirtualBox::openMedium()" /> has one more parameter
          now, which allows resolving duplicate medium UUIDs without the need
          for external tools.</para>
        </listitem>

        <listitem>
          <para>The <xref linkend="INetworkAdapter" xreflabel="INetworkAdapter"/>
          interface has been cleaned up. The various methods to activate an
          attachment type have been replaced by the
          <xref linkend="INetworkAdapter__attachmentType" xreflabel="INetworkAdapter::attachmentType"/> setter.</para>
          <para>Additionally each attachment mode now has its own attribute,
          which means that host only networks no longer share the settings with
          bridged interfaces.</para>
          <para>To allow introducing new network attachment implementations
          without making API changes, the concept of a generic network
          attachment driver has been introduced, which is configurable through
          key/value properties.</para>
        </listitem>

        <listitem>
          <para>This version introduces the guest facilities concept. A guest
          facility either represents a module or feature the guest is running or
          offering, which is defined by <xref linkend="AdditionsFacilityType"
          xreflabel="AdditionsFacilityType"/>. Each facility is member of a
          <xref linkend="AdditionsFacilityClass" xreflabel="AdditionsFacilityClass"/>
          and has a current status indicated by <xref linkend="AdditionsFacilityStatus"
          xreflabel="AdditionsFacilityStatus"/>, together with a timestamp (in ms) of
          the last status update.</para>
          <para>To address the above concept, the following changes were made:
            <itemizedlist>
              <listitem>
                <para>
                  In the <xref linkend="IGuest" xreflabel="IGuest"/> interface, the following were removed:
                  <itemizedlist>
                    <listitem>
                      <para>the <computeroutput>supportsSeamless</computeroutput> attribute;</para>
                    </listitem>
                    <listitem>
                      <para>the <computeroutput>supportsGraphics</computeroutput> attribute;</para>
                    </listitem>
                  </itemizedlist>
                </para>
              </listitem>
              <listitem>
                <para>
                  The function <xref linkend="IGuest__getFacilityStatus" xreflabel="IGuest::getFacilityStatus()"/>
                  was added. It quickly provides a facility's status without the need to get the facility
                  collection with <xref linkend="IGuest__facilities" xreflabel="IGuest::facilities"/>.
                </para>
              </listitem>
              <listitem>
                <para>
                  The attribute <xref linkend="IGuest__facilities" xreflabel="IGuest::facilities"/>
                  was added to provide an easy to access collection of all currently known guest
                  facilities, that is, it contains all facilies where at least one status update was
                  made since the guest was started.
                </para>
              </listitem>
              <listitem>
                <para>
                  The interface <xref linkend="IAdditionsFacility" xreflabel="IAdditionsFacility"/>
                  was added to represent a single facility returned by
                  <xref linkend="IGuest__facilities" xreflabel="IGuest::facilities"/>.
                </para>
              </listitem>
              <listitem>
                <para>
                  <xref linkend="AdditionsFacilityStatus" xreflabel="AdditionsFacilityStatus"/>
                  was added to represent a facility's overall status.
                </para>
              </listitem>
              <listitem>
                <para>
                  <xref linkend="AdditionsFacilityType" xreflabel="AdditionsFacilityType"/> and
                  <xref linkend="AdditionsFacilityClass" xreflabel="AdditionsFacilityClass"/> were
                  added to represent the facility's type and class.
                </para>
              </listitem>
            </itemizedlist>
          </para>
        </listitem>
      </itemizedlist>
    </sect1>

    <sect1>
      <title>Incompatible API changes with version 4.0</title>

      <itemizedlist>
        <listitem>
          <para>A new Java glue layer replacing the previous OOWS JAX-WS
          bindings was introduced. The new library allows for uniform code
          targeting both local (COM/XPCOM) and remote (SOAP) transports. Now,
          instead of <computeroutput>IWebsessionManager</computeroutput>, the
          new class <computeroutput>VirtualBoxManager</computeroutput> must be
          used. See <xref linkend="javaapi" xreflabel="Java API chapter" />
          for details.</para>
        </listitem>

        <listitem>
          <para>The confusingly named and impractical session APIs were
          changed. In existing client code, the following changes need to be
          made:<itemizedlist>
              <listitem>
                <para>Replace any
                <computeroutput>IVirtualBox::openSession(uuidMachine,
                ...)</computeroutput> API call with the machine's <xref
                linkend="IMachine__lockMachine"
                xreflabel="IMachine::lockMachine()" /> call and a
                <computeroutput>LockType.Write</computeroutput> argument. The
                functionality is unchanged, but instead of "opening a direct
                session on a machine" all documentation now refers to
                "obtaining a write lock on a machine for the client
                session".</para>
              </listitem>

              <listitem>
                <para>Similarly, replace any
                <computeroutput>IVirtualBox::openExistingSession(uuidMachine,
                ...)</computeroutput> call with the machine's <xref
                linkend="IMachine__lockMachine"
                xreflabel="IMachine::lockMachine()" /> call and a
                <computeroutput>LockType.Shared</computeroutput> argument.
                Whereas it was previously impossible to connect a client
                session to a running VM process in a race-free manner, the new
                API will atomically either write-lock the machine for the
                current session or establish a remote link to an existing
                session. Existing client code which tried calling both
                <computeroutput>openSession()</computeroutput> and
                <computeroutput>openExistingSession()</computeroutput> can now
                use this one call instead.</para>
              </listitem>

              <listitem>
                <para>Third, replace any
                <computeroutput>IVirtualBox::openRemoteSession(uuidMachine,
                ...)</computeroutput> call with the machine's <xref
                linkend="IMachine__launchVMProcess"
                xreflabel="IMachine::launchVMProcess()" /> call. The
                functionality is unchanged.</para>
              </listitem>

              <listitem>
                <para>The <xref linkend="SessionState"
                xreflabel="SessionState" /> enum was adjusted accordingly:
                "Open" is now "Locked", "Closed" is now "Unlocked", "Closing"
                is now "Unlocking".</para>
              </listitem>
            </itemizedlist></para>
        </listitem>

        <listitem>
          <para>Virtual machines created with VirtualBox 4.0 or later no
          longer register their media in the global media registry in the
          <computeroutput>VirtualBox.xml</computeroutput> file. Instead, such
          machines list all their media in their own machine XML files. As a
          result, a number of media-related APIs had to be modified again.
          <itemizedlist>
              <listitem>
                <para>Neither <xref linkend="IVirtualBox__createHardDisk"
                xreflabel="IVirtualBox::createHardDisk()" /> nor <xref
                linkend="IVirtualBox__openMedium"
                xreflabel="IVirtualBox::openMedium()" /> register media
                automatically any more.</para>
              </listitem>

              <listitem>
                <para><xref linkend="IMachine__attachDevice"
                xreflabel="IMachine::attachDevice()" /> and <xref
                linkend="IMachine__mountMedium"
                xreflabel="IMachine::mountMedium()" /> now take an IMedium
                object instead of a UUID as an argument. It is these two calls
                which add media to a registry now (either a machine registry
                for machines created with VirtualBox 4.0 or later or the
                global registry otherwise). As a consequence, if a medium is
                opened but never attached to a machine, it is no longer added
                to any registry any more.</para>
              </listitem>

              <listitem>
                <para>To reduce code duplication, the APIs
                IVirtualBox::findHardDisk(), getHardDisk(), findDVDImage(),
                getDVDImage(), findFloppyImage() and getFloppyImage() have all
                been merged into IVirtualBox::findMedium(), and
                IVirtualBox::openHardDisk(), openDVDImage() and
                openFloppyImage() have all been merged into <xref
                linkend="IVirtualBox__openMedium"
                xreflabel="IVirtualBox::openMedium()" />.</para>
              </listitem>

              <listitem>
                <para>The rare use case of changing the UUID and parent UUID
                of a medium previously handled by
                <computeroutput>openHardDisk()</computeroutput> is now in a
                separate IMedium::setIDs method.</para>
              </listitem>

              <listitem>
                <para><computeroutput>ISystemProperties::get/setDefaultHardDiskFolder()</computeroutput>
                have been removed since disk images are now by default placed
                in each machine's folder.</para>
              </listitem>

              <listitem>
                <para>The <xref linkend="ISystemProperties__infoVDSize"
                xreflabel="ISystemProperties::infoVDSize" /> attribute
                replaces the <computeroutput>getMaxVDISize()</computeroutput>
                API call; this now uses bytes instead of megabytes.</para>
              </listitem>
            </itemizedlist></para>
        </listitem>

        <listitem>
          <para>Machine management APIs were enhanced as follows:<itemizedlist>
              <listitem>
                <para><xref linkend="IVirtualBox__createMachine"
                xreflabel="IVirtualBox::createMachine()" /> is no longer
                restricted to creating machines in the default "Machines"
                folder, but can now create machines at arbitrary locations.
                For this to work, the parameter list had to be changed.</para>
              </listitem>

              <listitem>
                <para>The long-deprecated
                <computeroutput>IVirtualBox::createLegacyMachine()</computeroutput>
                API has been removed.</para>
              </listitem>

              <listitem>
                <para>To reduce code duplication and for consistency with the
                aforementioned media APIs,
                <computeroutput>IVirtualBox::getMachine()</computeroutput> has
                been merged with <xref linkend="IVirtualBox__findMachine"
                xreflabel="IVirtualBox::findMachine()" />, and
                <computeroutput>IMachine::getSnapshot()</computeroutput> has
                been merged with <xref linkend="IMachine__findSnapshot"
                xreflabel="IMachine::findSnapshot()" />.</para>
              </listitem>

              <listitem>
                <para><computeroutput>IVirtualBox::unregisterMachine()</computeroutput>
                was replaced with <xref linkend="IMachine__unregister"
                xreflabel="IMachine::unregister()" /> with additional
                functionality for cleaning up machine files.</para>
              </listitem>

              <listitem>
                <para><computeroutput>IConsole::forgetSavedState</computeroutput>
                has been renamed to <xref
                linkend="IConsole__discardSavedState"
                xreflabel="IConsole::discardSavedState()" />.</para>
              </listitem>
            </itemizedlist></para>
        </listitem>

        <listitem>
          <para>All event callbacks APIs were replaced with a new, generic
          event mechanism that can be used both locally (COM, XPCOM) and
          remotely (web services). Also, the new mechanism is usable from
          scripting languages and a local Java. See <xref linkend="IEvent"
          xreflabel="events" /> for details. The new concept will require
          changes to all clients that used event callbacks.</para>
        </listitem>

        <listitem>
          <para><computeroutput>additionsActive()</computeroutput> was
          replaced with <xref linkend="IGuest__additionsRunLevel"
          xreflabel="additionsRunLevel()" /> and <xref
          linkend="IGuest__getAdditionsStatus"
          xreflabel="getAdditionsStatus()" /> in order to support a more
          detailed status of the current Guest Additions loading/readiness
          state. <xref linkend="IGuest__additionsVersion"
          xreflabel="IGuest::additionsVersion()" /> no longer returns the
          Guest Additions interface version but the installed Guest Additions
          version and revision in form of
          <computeroutput>3.3.0r12345</computeroutput>.</para>
        </listitem>

        <listitem>
          <para>To address shared folders auto-mounting support, the following
          APIs were extended to require an additional
          <computeroutput>automount</computeroutput> parameter: <itemizedlist>
              <listitem>
                <para><xref linkend="IVirtualBox__createSharedFolder"
                xreflabel="IVirtualBox::createSharedFolder()" /></para>
              </listitem>

              <listitem>
                <para><xref linkend="IMachine__createSharedFolder"
                xreflabel="IMachine::createSharedFolder()" /></para>
              </listitem>

              <listitem>
                <para><xref linkend="IConsole__createSharedFolder"
                xreflabel="IConsole::createSharedFolder()" /></para>
              </listitem>
            </itemizedlist> Also, a new property named
          <computeroutput>autoMount</computeroutput> was added to the <xref
          linkend="ISharedFolder" xreflabel="ISharedFolder" />
          interface.</para>
        </listitem>

        <listitem>
          <para>The appliance (OVF) APIs were enhanced as
          follows:<itemizedlist>
              <listitem>
                <para><xref linkend="IMachine__export"
                xreflabel="IMachine::export()" /> received an extra parameter
                <computeroutput>location</computeroutput>, which is used to
                decide for the disk naming.</para>
              </listitem>

              <listitem>
                <para><xref linkend="IAppliance__write"
                xreflabel="IAppliance::write()" /> received an extra parameter
                <computeroutput>manifest</computeroutput>, which can suppress
                creating the manifest file on export.</para>
              </listitem>

              <listitem>
                <para><xref linkend="IVFSExplorer__entryList"
                xreflabel="IVFSExplorer::entryList()" /> received two extra
                parameters <computeroutput>sizes</computeroutput> and
                <computeroutput>modes</computeroutput>, which contains the
                sizes (in bytes) and the file access modes (in octal form) of
                the returned files.</para>
              </listitem>
            </itemizedlist></para>
        </listitem>

        <listitem>
          <para>Support for remote desktop access to virtual machines has been
          cleaned up to allow third party implementations of the remote
          desktop server. This is called the VirtualBox Remote Desktop
          Extension (VRDE) and can be added to VirtualBox by installing the
          corresponding extension package; see the VirtualBox User Manual for
          details.</para>

          <para>The following API changes were made to support the VRDE
          interface: <itemizedlist>
              <listitem>
                <para><computeroutput>IVRDPServer</computeroutput> has been
                renamed to <xref linkend="IVRDEServer"
                xreflabel="IVRDEServer" />.</para>
              </listitem>

              <listitem>
                <para><computeroutput>IRemoteDisplayInfo</computeroutput> has
                been renamed to <xref linkend="IVRDEServerInfo"
                xreflabel="IVRDEServerInfo" />.</para>
              </listitem>

              <listitem>
                <para><xref linkend="IMachine__VRDEServer"
                xreflabel="IMachine::VRDEServer" /> replaces
                <computeroutput>VRDPServer.</computeroutput></para>
              </listitem>

              <listitem>
                <para><xref linkend="IConsole__VRDEServerInfo"
                xreflabel="IConsole::VRDEServerInfo" /> replaces
                <computeroutput>RemoteDisplayInfo</computeroutput>.</para>
              </listitem>

              <listitem>
                <para><xref linkend="ISystemProperties__VRDEAuthLibrary"
                xreflabel="ISystemProperties::VRDEAuthLibrary" /> replaces
                <computeroutput>RemoteDisplayAuthLibrary</computeroutput>.</para>
              </listitem>

              <listitem>
                <para>The following methods have been implemented in
                <computeroutput>IVRDEServer</computeroutput> to support
                generic VRDE properties: <itemizedlist>
                    <listitem>
                      <para><xref linkend="IVRDEServer__setVRDEProperty"
                      xreflabel="IVRDEServer::setVRDEProperty" /></para>
                    </listitem>

                    <listitem>
                      <para><xref linkend="IVRDEServer__getVRDEProperty"
                      xreflabel="IVRDEServer::getVRDEProperty" /></para>
                    </listitem>

                    <listitem>
                      <para><xref linkend="IVRDEServer__VRDEProperties"
                      xreflabel="IVRDEServer::VRDEProperties" /></para>
                    </listitem>
                  </itemizedlist></para>

                <para>A few implementation-specific attributes of the old
                <computeroutput>IVRDPServer</computeroutput> interface have
                been removed and replaced with properties: <itemizedlist>
                    <listitem>
                      <para><computeroutput>IVRDPServer::Ports</computeroutput>
                      has been replaced with the
                      <computeroutput>"TCP/Ports"</computeroutput> property.
                      The property value is a string, which contains a
                      comma-separated list of ports or ranges of ports. Use a
                      dash between two port numbers to specify a range.
                      Example:
                      <computeroutput>"5000,5010-5012"</computeroutput></para>
                    </listitem>

                    <listitem>
                      <para><computeroutput>IVRDPServer::NetAddress</computeroutput>
                      has been replaced with the
                      <computeroutput>"TCP/Address"</computeroutput> property.
                      The property value is an IP address string. Example:
                      <computeroutput>"127.0.0.1"</computeroutput></para>
                    </listitem>

                    <listitem>
                      <para><computeroutput>IVRDPServer::VideoChannel</computeroutput>
                      has been replaced with the
                      <computeroutput>"VideoChannel/Enabled"</computeroutput>
                      property. The property value is either
                      <computeroutput>"true"</computeroutput> or
                      <computeroutput>"false"</computeroutput></para>
                    </listitem>

                    <listitem>
                      <para><computeroutput>IVRDPServer::VideoChannelQuality</computeroutput>
                      has been replaced with the
                      <computeroutput>"VideoChannel/Quality"</computeroutput>
                      property. The property value is a string which contain a
                      decimal number in range 10..100. Invalid values are
                      ignored and the quality is set to the default value 75.
                      Example: <computeroutput>"50"</computeroutput></para>
                    </listitem>
                  </itemizedlist></para>
              </listitem>
            </itemizedlist></para>
        </listitem>

        <listitem>
          <para>The VirtualBox external authentication module interface has
          been updated and made more generic. Because of that,
          <computeroutput>VRDPAuthType</computeroutput> enumeration has been
          renamed to <xref linkend="AuthType" xreflabel="AuthType" />.</para>
        </listitem>
      </itemizedlist>
    </sect1>

    <sect1>
      <title>Incompatible API changes with version 3.2</title>

      <itemizedlist>
        <listitem>
          <para>The following interfaces were renamed for consistency:
          <itemizedlist>
              <listitem>
                <para>IMachine::getCpuProperty() is now <xref
                linkend="IMachine__getCPUProperty"
                xreflabel="IMachine::getCPUProperty()" />;</para>
              </listitem>

              <listitem>
                <para>IMachine::setCpuProperty() is now <xref
                linkend="IMachine__setCPUProperty"
                xreflabel="IMachine::setCPUProperty()" />;</para>
              </listitem>

              <listitem>
                <para>IMachine::getCpuIdLeaf() is now <xref
                linkend="IMachine__getCPUIDLeaf"
                xreflabel="IMachine::getCPUIDLeaf()" />;</para>
              </listitem>

              <listitem>
                <para>IMachine::setCpuIdLeaf() is now <xref
                linkend="IMachine__setCPUIDLeaf"
                xreflabel="IMachine::setCPUIDLeaf()" />;</para>
              </listitem>

              <listitem>
                <para>IMachine::removeCpuIdLeaf() is now <xref
                linkend="IMachine__removeCPUIDLeaf"
                xreflabel="IMachine::removeCPUIDLeaf()" />;</para>
              </listitem>

              <listitem>
                <para>IMachine::removeAllCpuIdLeafs() is now <xref
                linkend="IMachine__removeAllCPUIDLeaves"
                xreflabel="IMachine::removeAllCPUIDLeaves()" />;</para>
              </listitem>

              <listitem>
                <para>the CpuPropertyType enum is now <xref
                linkend="CPUPropertyType"
                xreflabel="CPUPropertyType" />.</para>
              </listitem>

              <listitem>
                <para>IVirtualBoxCallback::onSnapshotDiscarded() is now
                IVirtualBoxCallback::onSnapshotDeleted.</para>
              </listitem>
            </itemizedlist></para>
        </listitem>

        <listitem>
          <para>When creating a VM configuration with <xref
          linkend="IVirtualBox__createMachine"
          xreflabel="IVirtualBox::createMachine" />) it is now possible to
          ignore existing configuration files which would previously have
          caused a failure. For this the
          <computeroutput>override</computeroutput> parameter was
          added.</para>
        </listitem>

        <listitem>
          <para>Deleting snapshots via <xref
          linkend="IConsole__deleteSnapshot"
          xreflabel="IConsole::deleteSnapshot()" /> is now possible while the
          associated VM is running in almost all cases. The API is unchanged,
          but client code that verifies machine states to determine whether
          snapshots can be deleted may need to be adjusted.</para>
        </listitem>

        <listitem>
          <para>The IoBackendType enumeration was replaced with a boolean flag
          (see <xref linkend="IStorageController__useHostIOCache"
          xreflabel="IStorageController::useHostIOCache" />).</para>
        </listitem>

        <listitem>
          <para>To address multi-monitor support, the following APIs were
          extended to require an additional
          <computeroutput>screenId</computeroutput> parameter: <itemizedlist>
              <listitem>
                <para><xref linkend="IMachine__querySavedThumbnailSize"
                xreflabel="IMachine::querySavedThumbnailSize()" /></para>
              </listitem>

              <listitem>
                <para><xref linkend="IMachine__readSavedThumbnailToArray"
                xreflabel="IMachine::readSavedThumbnailToArray()" /></para>
              </listitem>

              <listitem>
                <para><xref linkend="IMachine__querySavedScreenshotPNGSize"
                xreflabel="IMachine::querySavedScreenshotPNGSize()" /></para>
              </listitem>

              <listitem>
                <para><xref linkend="IMachine__readSavedScreenshotPNGToArray"
                xreflabel="IMachine::readSavedScreenshotPNGToArray()" /></para>
              </listitem>
            </itemizedlist></para>
        </listitem>

        <listitem>
          <para>The <computeroutput>shape</computeroutput> parameter of
          IConsoleCallback::onMousePointerShapeChange was changed from a
          implementation-specific pointer to a safearray, enabling scripting
          languages to process pointer shapes.</para>
        </listitem>
      </itemizedlist>
    </sect1>

    <sect1>
      <title>Incompatible API changes with version 3.1</title>

      <itemizedlist>
        <listitem>
          <para>Due to the new flexibility in medium attachments that was
          introduced with version 3.1 (in particular, full flexibility with
          attaching CD/DVD drives to arbitrary controllers), we seized the
          opportunity to rework all interfaces dealing with storage media to
          make the API more flexible as well as logical. The <xref
          linkend="IStorageController" xreflabel="IStorageController" />,
          <xref linkend="IMedium" xreflabel="IMedium" />, <xref
          linkend="IMediumAttachment" xreflabel="IMediumAttachment" /> and,
          <xref linkend="IMachine" xreflabel="IMachine" /> interfaces were
          affected the most. Existing code using them to configure storage and
          media needs to be carefully checked.</para>

          <para>All media (hard disks, floppies and CDs/DVDs) are now
          uniformly handled through the <xref linkend="IMedium"
          xreflabel="IMedium" /> interface. The device-specific interfaces
          (<code>IHardDisk</code>, <code>IDVDImage</code>,
          <code>IHostDVDDrive</code>, <code>IFloppyImage</code> and
          <code>IHostFloppyDrive</code>) have been merged into IMedium; CD/DVD
          and floppy media no longer need special treatment. The device type
          of a medium determines in which context it can be used. Some
          functionality was moved to the other storage-related
          interfaces.</para>

          <para><code>IMachine::attachHardDisk</code> and similar methods have
          been renamed and generalized to deal with any type of drive and
          medium. <xref linkend="IMachine__attachDevice"
          xreflabel="IMachine::attachDevice()" /> is the API method for adding
          any drive to a storage controller. The floppy and DVD/CD drives are
          no longer handled specially, and that means you can have more than
          one of them. As before, drives can only be changed while the VM is
          powered off. Mounting (or unmounting) removable media at runtime is
          possible with <xref linkend="IMachine__mountMedium"
          xreflabel="IMachine::mountMedium()" />.</para>

          <para>Newly created virtual machines have no storage controllers
          associated with them. Even the IDE Controller needs to be created
          explicitly. The floppy controller is now visible as a separate
          controller, with a new storage bus type. For each storage bus type
          you can query the device types which can be attached, so that it is
          not necessary to hardcode any attachment rules.</para>

          <para>This required matching changes e.g. in the callback interfaces
          (the medium specific change notification was replaced by a generic
          medium change notification) and removing associated enums (e.g.
          <code>DriveState</code>). In many places the incorrect use of the
          plural form "media" was replaced by "medium", to improve
          consistency.</para>
        </listitem>

        <listitem>
          <para>Reading the <xref linkend="IMedium__state"
          xreflabel="IMedium::state" xrefstyle="" /> attribute no longer
          automatically performs an accessibility check; a new method <xref
          linkend="IMedium__refreshState"
          xreflabel="IMedium::refreshState()" /> does this. The attribute only
          returns the state any more.</para>
        </listitem>

        <listitem>
          <para>There were substantial changes related to snapshots, triggered
          by the "branched snapshots" functionality introduced with version
          3.1. IConsole::discardSnapshot was renamed to <xref
          linkend="IConsole__deleteSnapshot"
          xreflabel="IConsole::deleteSnapshot()" />.
          IConsole::discardCurrentState and
          IConsole::discardCurrentSnapshotAndState were removed; corresponding
          new functionality is in <xref linkend="IConsole__restoreSnapshot"
          xreflabel="IConsole::restoreSnapshot()" />. Also, when <xref
          linkend="IConsole__takeSnapshot"
          xreflabel="IConsole::takeSnapshot()" /> is called on a running
          virtual machine, a live snapshot will be created. The old behavior
          was to temporarily pause the virtual machine while creating an
          online snapshot.</para>
        </listitem>

        <listitem>
          <para>The <computeroutput>IVRDPServer</computeroutput>,
          <computeroutput>IRemoteDisplayInfo"</computeroutput> and
          <computeroutput>IConsoleCallback</computeroutput> interfaces were
          changed to reflect VRDP server ability to bind to one of available
          ports from a list of ports.</para>

          <para>The <computeroutput>IVRDPServer::port</computeroutput>
          attribute has been replaced with
          <computeroutput>IVRDPServer::ports</computeroutput>, which is a
          comma-separated list of ports or ranges of ports.</para>

          <para>An <computeroutput>IRemoteDisplayInfo::port"</computeroutput>
          attribute has been added for querying the actual port VRDP server
          listens on.</para>

          <para>An IConsoleCallback::onRemoteDisplayInfoChange() notification
          callback has been added.</para>
        </listitem>

        <listitem>
          <para>The parameter lists for the following functions were
          modified:<itemizedlist>
              <listitem>
                <para><xref linkend="IHost__removeHostOnlyNetworkInterface"
                xreflabel="IHost::removeHostOnlyNetworkInterface()" /></para>
              </listitem>

              <listitem>
                <para><xref linkend="IHost__removeUSBDeviceFilter"
                xreflabel="IHost::removeUSBDeviceFilter()" /></para>
              </listitem>
            </itemizedlist></para>
        </listitem>

        <listitem>
          <para>In the OOWS bindings for JAX-WS, the behavior of structures
          changed: for one, we implemented natural structures field access so
          you can just call a "get" method to obtain a field. Secondly,
          setters in structures were disabled as they have no expected effect
          and were at best misleading.</para>
        </listitem>
      </itemizedlist>
    </sect1>

    <sect1>
      <title>Incompatible API changes with version 3.0</title>

      <itemizedlist>
        <listitem>
          <para>In the object-oriented web service bindings for JAX-WS, proper
          inheritance has been introduced for some classes, so explicit
          casting is no longer needed to call methods from a parent class. In
          particular, IHardDisk and other classes now properly derive from
          <xref linkend="IMedium" xreflabel="IMedium" />.</para>
        </listitem>

        <listitem>
          <para>All object identifiers (machines, snapshots, disks, etc)
          switched from GUIDs to strings (now still having string
          representation of GUIDs inside). As a result, no particular internal
          structure can be assumed for object identifiers; instead, they
          should be treated as opaque unique handles. This change mostly
          affects Java and C++ programs; for other languages, GUIDs are
          transparently converted to strings.</para>
        </listitem>

        <listitem>
          <para>The uses of NULL strings have been changed greatly. All out
          parameters now use empty strings to signal a null value. For in
          parameters both the old NULL and empty string is allowed. This
          change was necessary to support more client bindings, especially
          using the web service API. Many of them either have no special NULL
          value or have trouble dealing with it correctly in the respective
          library code.</para>
        </listitem>

        <listitem>
          <para>Accidentally, the <code>TSBool</code> interface still appeared
          in 3.0.0, and was removed in 3.0.2. This is an SDK bug, do not use
          the SDK for VirtualBox 3.0.0 for developing clients.</para>
        </listitem>

        <listitem>
          <para>The type of <xref linkend="IVirtualBoxErrorInfo__resultCode"
          xreflabel="IVirtualBoxErrorInfo::resultCode" /> changed from
          <computeroutput>result</computeroutput> to
          <computeroutput>long</computeroutput>.</para>
        </listitem>

        <listitem>
          <para>The parameter list of IVirtualBox::openHardDisk was
          changed.</para>
        </listitem>

        <listitem>
          <para>The method IConsole::discardSavedState was renamed to
          IConsole::forgetSavedState, and a parameter was added.</para>
        </listitem>

        <listitem>
          <para>The method IConsole::powerDownAsync was renamed to <xref
          linkend="IConsole__powerDown" xreflabel="IConsole::powerDown" />,
          and the previous method with that name was deleted. So effectively a
          parameter was added.</para>
        </listitem>

        <listitem>
          <para>In the <xref linkend="IFramebuffer"
          xreflabel="IFramebuffer" /> interface, the following were
          removed:<itemizedlist>
              <listitem>
                <para>the <computeroutput>operationSupported</computeroutput>
                attribute;</para>

                <para>(as a result, the
                <computeroutput>FramebufferAccelerationOperation</computeroutput>
                enum was no longer needed and removed as well);</para>
              </listitem>

              <listitem>
                <para>the <computeroutput>solidFill()</computeroutput>
                method;</para>
              </listitem>

              <listitem>
                <para>the <computeroutput>copyScreenBits()</computeroutput>
                method.</para>
              </listitem>
            </itemizedlist></para>
        </listitem>

        <listitem>
          <para>In the <xref linkend="IDisplay" xreflabel="IDisplay" />
          interface, the following were removed:<itemizedlist>
              <listitem>
                <para>the
                <computeroutput>setupInternalFramebuffer()</computeroutput>
                method;</para>
              </listitem>

              <listitem>
                <para>the <computeroutput>lockFramebuffer()</computeroutput>
                method;</para>
              </listitem>

              <listitem>
                <para>the <computeroutput>unlockFramebuffer()</computeroutput>
                method;</para>
              </listitem>

              <listitem>
                <para>the
                <computeroutput>registerExternalFramebuffer()</computeroutput>
                method.</para>
              </listitem>
            </itemizedlist></para>
        </listitem>
      </itemizedlist>
    </sect1>

    <sect1>
      <title>Incompatible API changes with version 2.2</title>

      <itemizedlist>
        <listitem>
          <para>Added explicit version number into JAX-WS Java package names,
          such as <computeroutput>org.virtualbox_2_2</computeroutput>,
          allowing connect to multiple VirtualBox clients from single Java
          application.</para>
        </listitem>

        <listitem>
          <para>The interfaces having a "2" suffix attached to them with
          version 2.1 were renamed again to have that suffix removed. This
          time around, this change involves only the name, there are no
          functional differences.</para>

          <para>As a result, IDVDImage2 is now IDVDImage; IHardDisk2 is now
          IHardDisk; IHardDisk2Attachment is now IHardDiskAttachment.</para>

          <para>Consequentially, all related methods and attributes that had a
          "2" suffix have been renamed; for example, IMachine::attachHardDisk2
          now becomes IMachine::attachHardDisk().</para>
        </listitem>

        <listitem>
          <para>IVirtualBox::openHardDisk has an extra parameter for opening a
          disk read/write or read-only.</para>
        </listitem>

        <listitem>
          <para>The remaining collections were replaced by more performant
          safe-arrays. This affects the following collections:</para>

          <itemizedlist>
            <listitem>
              <para>IGuestOSTypeCollection</para>
            </listitem>

            <listitem>
              <para>IHostDVDDriveCollection</para>
            </listitem>

            <listitem>
              <para>IHostFloppyDriveCollection</para>
            </listitem>

            <listitem>
              <para>IHostUSBDeviceCollection</para>
            </listitem>

            <listitem>
              <para>IHostUSBDeviceFilterCollection</para>
            </listitem>

            <listitem>
              <para>IProgressCollection</para>
            </listitem>

            <listitem>
              <para>ISharedFolderCollection</para>
            </listitem>

            <listitem>
              <para>ISnapshotCollection</para>
            </listitem>

            <listitem>
              <para>IUSBDeviceCollection</para>
            </listitem>

            <listitem>
              <para>IUSBDeviceFilterCollection</para>
            </listitem>
          </itemizedlist>
        </listitem>

        <listitem>
          <para>Since "Host Interface Networking" was renamed to "bridged
          networking" and host-only networking was introduced, all associated
          interfaces needed renaming as well. In detail:</para>

          <itemizedlist>
            <listitem>
              <para>The HostNetworkInterfaceType enum has been renamed to
              <xref linkend="HostNetworkInterfaceMediumType"
              xreflabel="HostNetworkInterfaceMediumType" /></para>
            </listitem>

            <listitem>
              <para>The IHostNetworkInterface::type attribute has been renamed
              to <xref linkend="IHostNetworkInterface__mediumType"
              xreflabel="IHostNetworkInterface::mediumType" /></para>
            </listitem>

            <listitem>
              <para>INetworkAdapter::attachToHostInterface() has been renamed
              to INetworkAdapter::attachToBridgedInterface</para>
            </listitem>

            <listitem>
              <para>In the IHost interface, createHostNetworkInterface() has
              been renamed to <xref
              linkend="IHost__createHostOnlyNetworkInterface"
              xreflabel="createHostOnlyNetworkInterface()" /></para>
            </listitem>

            <listitem>
              <para>Similarly, removeHostNetworkInterface() has been renamed
              to <xref linkend="IHost__removeHostOnlyNetworkInterface"
              xreflabel="removeHostOnlyNetworkInterface()" /></para>
            </listitem>
          </itemizedlist>
        </listitem>
      </itemizedlist>
    </sect1>

    <sect1>
      <title>Incompatible API changes with version 2.1</title>

      <itemizedlist>
        <listitem>
          <para>With VirtualBox 2.1, error codes were added to many error
          infos that give the caller a machine-readable (numeric) feedback in
          addition to the error string that has always been available. This is
          an ongoing process, and future versions of this SDK reference will
          document the error codes for each method call.</para>
        </listitem>

        <listitem>
          <para>The hard disk and other media interfaces were completely
          redesigned. This was necessary to account for the support of VMDK,
          VHD and other image types; since backwards compatibility had to be
          broken anyway, we seized the moment to redesign the interfaces in a
          more logical way.</para>

          <itemizedlist>
            <listitem>
              <para>Previously, the old IHardDisk interface had several
              derivatives called IVirtualDiskImage, IVMDKImage, IVHDImage,
              IISCSIHardDisk and ICustomHardDisk for the various disk formats
              supported by VirtualBox. The new IHardDisk2 interface that comes
              with version 2.1 now supports all hard disk image formats
              itself.</para>
            </listitem>

            <listitem>
              <para>IHardDiskFormat is a new interface to describe the
              available back-ends for hard disk images (e.g. VDI, VMDK, VHD or
              iSCSI). The IHardDisk2::format attribute can be used to find out
              the back-end that is in use for a particular hard disk image.
              ISystemProperties::hardDiskFormats[] contains a list of all
              back-ends supported by the system. <xref
              linkend="ISystemProperties__defaultHardDiskFormat"
              xreflabel="ISystemProperties::defaultHardDiskFormat" /> contains
              the default system format.</para>
            </listitem>

            <listitem>
              <para>In addition, the new <xref linkend="IMedium"
              xreflabel="IMedium" /> interface is a generic interface for hard
              disk, DVD and floppy images that contains the attributes and
              methods shared between them. It can be considered a parent class
              of the more specific interfaces for those images, which are now
              IHardDisk2, IDVDImage2 and IFloppyImage2.</para>

              <para>In each case, the "2" versions of these interfaces replace
              the earlier versions that did not have the "2" suffix.
              Previously, the IDVDImage and IFloppyImage interfaces were
              entirely unrelated to IHardDisk.</para>
            </listitem>

            <listitem>
              <para>As a result, all parts of the API that previously
              referenced IHardDisk, IDVDImage or IFloppyImage or any of the
              old subclasses are gone and will have replacements that use
              IHardDisk2, IDVDImage2 and IFloppyImage2; see, for example,
              IMachine::attachHardDisk2.</para>
            </listitem>

            <listitem>
              <para>In particular, the IVirtualBox::hardDisks2 array replaces
              the earlier IVirtualBox::hardDisks collection.</para>
            </listitem>
          </itemizedlist>
        </listitem>

        <listitem>
          <para><xref linkend="IGuestOSType" xreflabel="IGuestOSType" /> was
          extended to group operating systems into families and for 64-bit
          support.</para>
        </listitem>

        <listitem>
          <para>The <xref linkend="IHostNetworkInterface"
          xreflabel="IHostNetworkInterface" /> interface was completely
          rewritten to account for the changes in how Host Interface
          Networking is now implemented in VirtualBox 2.1.</para>
        </listitem>

        <listitem>
          <para>The IVirtualBox::machines2[] array replaces the former
          IVirtualBox::machines collection.</para>
        </listitem>

        <listitem>
          <para>Added <xref linkend="IHost__getProcessorFeature"
          xreflabel="IHost::getProcessorFeature()" /> and <xref
          linkend="ProcessorFeature" xreflabel="ProcessorFeature" />
          enumeration.</para>
        </listitem>

        <listitem>
          <para>The parameter list for <xref
          linkend="IVirtualBox__createMachine"
          xreflabel="IVirtualBox::createMachine()" /> was modified.</para>
        </listitem>

        <listitem>
          <para>Added IMachine::pushGuestProperty.</para>
        </listitem>

        <listitem>
          <para>New attributes in IMachine: <xref
          linkend="IMachine__accelerate3DEnabled"
          xreflabel="accelerate3DEnabled" />, HWVirtExVPIDEnabled, <xref
          linkend="IMachine__guestPropertyNotificationPatterns"
          xreflabel="guestPropertyNotificationPatterns" />, <xref
          linkend="IMachine__CPUCount" xreflabel="CPUCount" />.</para>
        </listitem>

        <listitem>
          <para>Added <xref linkend="IConsole__powerUpPaused"
          xreflabel="IConsole::powerUpPaused()" /> and <xref
          linkend="IConsole__getGuestEnteredACPIMode"
          xreflabel="IConsole::getGuestEnteredACPIMode()" />.</para>
        </listitem>

        <listitem>
          <para>Removed ResourceUsage enumeration.</para>
        </listitem>
      </itemizedlist>
    </sect1>
  </chapter>
</book>
<!-- vim: set shiftwidth=2 tabstop=2 expandtab: -->