source: vbox/trunk/doc/manual/en_US/user_Installation.xml@ 98108

<?xml version="1.0" encoding="UTF-8"?>
<!--
    Copyright (C) 2006-2023 Oracle and/or its affiliates.

    This file is part of VirtualBox base platform packages, as
    available from https://www.virtualbox.org.

    This program is free software; you can redistribute it and/or
    modify it under the terms of the GNU General Public License
    as published by the Free Software Foundation, in version 3 of the
    License.

    This program is distributed in the hope that it will be useful, but
    WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
    General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program; if not, see <https://www.gnu.org/licenses>.

    SPDX-License-Identifier: GPL-3.0-only
-->
<!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
"http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd"[
<!ENTITY % all.entities SYSTEM "all-entities.ent">
%all.entities;
]>
<chapter id="installation">

  <title>Installation Details</title>

  <para>
    As installation of &product-name; varies depending on your host
    operating system, the following sections provide installation
    instructions for Windows, macOS, Linux, and Oracle Solaris.
  </para>

  <sect1 id="installation_windows">

    <title>Installing on Windows Hosts</title>

    <sect2 id="install-win-prereq">

      <title>Prerequisites</title>

      <para>
        For the various versions of Windows that are supported as host
        operating systems, please refer to
        <xref linkend="hostossupport" />.
      </para>

      <para>
        In addition, Windows Installer must be present on your system.
        This should be the case for all supported Windows platforms.
      </para>

    </sect2>

    <sect2 id="install-win-performing">

      <title>Performing the Installation</title>

      <para>
        The &product-name; installation can be started in either of the
        following ways:
      </para>

      <itemizedlist>

        <listitem>
          <para>
            By double-clicking on the executable file.
          </para>
        </listitem>

        <listitem>
          <para>
            By entering the following command:
          </para>

<screen>VirtualBox-&lt;version&gt;-&lt;revision&gt;-Win.exe -extract</screen>

          <para>
            This will extract the installer into a temporary directory,
            along with the .MSI file. Run the following command to
            perform the installation:
          </para>

<screen>msiexec /i VirtualBox-&lt;version&gt;-&lt;revision&gt;-Win.msi</screen>
        </listitem>

      </itemizedlist>

      <para>
        Using either way displays the installation
        <emphasis role="bold">Welcome</emphasis> dialog and enables you
        to choose where to install &product-name;, and which components
        to install. In addition to the &product-name; application, the
        following components are available:
      </para>

      <itemizedlist>

        <listitem>
          <para>
            <emphasis role="bold">USB support.</emphasis> This package
            contains special drivers for your Windows host that
            &product-name; requires to fully support USB devices inside
            your virtual machines.
          </para>
        </listitem>

        <listitem>
          <para>
            <emphasis role="bold">Networking.</emphasis> This package
            contains extra networking drivers for your Windows host that
            &product-name; needs to support Bridged Networking. This
            enables your VM's virtual network cards to be accessed from
            other machines on your physical network.
          </para>
        </listitem>

        <listitem>
          <para>
            <emphasis role="bold">Python support.</emphasis> This
            package contains Python scripting support for the
            &product-name; API, see <xref linkend="VirtualBoxAPI" />.
            For this to work, an already working Windows Python
            installation on the system is required.
          </para>

          <para>
            See, for example:
            <ulink url="http://www.python.org/download/windows/" />.
          </para>

          <note>
            <para>
              Python version at least 2.6 is required. Python 3 is also
              supported.
            </para>
          </note>
        </listitem>

      </itemizedlist>

      <para>
        Depending on your Windows configuration, you may see warnings
        about unsigned drivers, or similar. Click
        <emphasis role="bold">Continue</emphasis> for these warnings, as
        otherwise &product-name; might not function correctly after
        installation.
      </para>

      <para>
        The installer will create an &product-name; group in the Windows
        <emphasis role="bold">Start</emphasis> menu, which enables you
        to launch the application and access its documentation.
      </para>

      <para>
        With standard settings, &product-name; will be installed for all
        users on the local system. If this is not wanted, you must
        invoke the installer by first extracting as follows:
      </para>

<screen>VirtualBox.exe -extract</screen>

      <para>
        Then, run either of the following commands on the extracted .MSI
        file. This will install &product-name; only for the current
        user.
      </para>

<screen>VirtualBox.exe -msiparams ALLUSERS=2</screen>

<screen>msiexec /i VirtualBox-&lt;version&gt;-Win.msi ALLUSERS=2</screen>

      <para>
        If you do not want to install all features of &product-name;,
        you can set the optional <literal>ADDLOCAL</literal> parameter
        to explicitly name the features to be installed. The following
        features are available:
      </para>

      <variablelist>

        <varlistentry>
          <term>
            VBoxApplication
          </term>

          <listitem>
            <para>
              Main binaries of &product-name;.
            </para>

            <note>
              <para>
                This feature must not be absent, since it contains the
                minimum set of files to have working &product-name;
                installation.
              </para>
            </note>
          </listitem>
        </varlistentry>

        <varlistentry>
          <term>
            VBoxUSB
          </term>

          <listitem>
            <para>
              USB support.
            </para>
          </listitem>
        </varlistentry>

        <varlistentry>
          <term>
            VBoxNetwork
          </term>

          <listitem>
            <para>
              All networking support. This includes the VBoxNetworkFlt
              and VBoxNetworkAdp features.
            </para>
          </listitem>
        </varlistentry>

        <varlistentry>
          <term>
            VBoxNetworkFlt
          </term>

          <listitem>
            <para>
              Bridged networking support.
            </para>
          </listitem>
        </varlistentry>

        <varlistentry>
          <term>
            VBoxNetworkAdp
          </term>

          <listitem>
            <para>
              Host-only networking support
            </para>
          </listitem>
        </varlistentry>

        <varlistentry>
          <term>
            VBoxPython
          </term>

          <listitem>
            <para>
              Python support
            </para>
          </listitem>
        </varlistentry>

      </variablelist>

      <para>
        For example, to only install USB support along with the main
        binaries, run either of the following commands:
      </para>

<screen>VirtualBox.exe -msiparams ADDLOCAL=VBoxApplication,VBoxUSB</screen>

<screen>msiexec /i VirtualBox-&lt;version&gt;-Win.msi ADDLOCAL=VBoxApplication,VBoxUSB</screen>

      <para>
        The user is able to choose between NDIS5 and NDIS6 host network
        filter drivers during the installation. This is done using a
        command line parameter, <literal>NETWORKTYPE</literal>. The
        NDIS6 driver is the default for most supported Windows hosts.
        For some legacy Windows versions, the installer will
        automatically select the NDIS5 driver and this cannot be
        changed.
      </para>

      <para>
        You can force an install of the legacy NDIS5 host network filter
        driver by specifying <literal>NETWORKTYPE=NDIS5</literal>. For
        example, to install the NDIS5 driver on Windows 7 use either of
        the following commands:
      </para>

<screen>VirtualBox.exe -msiparams NETWORKTYPE=NDIS5</screen>

<screen>msiexec /i VirtualBox-&lt;version&gt;-Win;.msi NETWORKTYPE=NDIS5</screen>

    </sect2>

    <sect2 id="install-win-uninstall">

      <title>Uninstallation</title>

      <para>
        As &product-name; uses the standard Microsoft Windows installer,
        &product-name; can be safely uninstalled at any time. Click the
        program entry in the <emphasis role="bold">Add/Remove
        Programs</emphasis> list in the Windows Control Panel.
      </para>

    </sect2>

    <sect2 id="install-win-unattended">

      <title>Unattended Installation</title>

      <para>
        Unattended installations can be performed using the standard MSI
        support.
      </para>

    </sect2>

    <sect2 id="install-win-public-props">

      <title>Public Properties</title>

      <para>
        Public properties can be specified with the MSI API, to control
        additional behavior and features of the Windows host installer.
        Use either of the following commands:
      </para>

<screen>VirtualBox.exe -msiparams NAME=VALUE [...]</screen>

<screen>msiexec /i VirtualBox-&lt;version&gt;-Win.msi NAME=VALUE [...]</screen>

      <para>
        The following public properties are available.
      </para>

      <itemizedlist>

        <listitem>
          <para>
            VBOX_INSTALLDESKTOPSHORTCUT
          </para>

          <para>
            Specifies whether or not an &product-name; icon on the
            desktop should be created.
          </para>

          <para>
            Set to <literal>1</literal> to enable, <literal>0</literal>
            to disable. Default is 1.
          </para>
        </listitem>

        <listitem>
          <para>
            VBOX_INSTALLQUICKLAUNCHSHORTCUT
          </para>

          <para>
            Specifies whether or not an &product-name; icon in the Quick
            Launch Bar should be created.
          </para>

          <para>
            Set to <literal>1</literal> to enable, <literal>0</literal>
            to disable. Default is 1.
          </para>
        </listitem>

        <listitem>
          <para>
            VBOX_REGISTERFILEEXTENSIONS
          </para>

          <para>
            Specifies whether or not the file extensions .vbox,
            .vbox-extpack, .ovf, .ova, .vdi, .vmdk, .vhd and .vdd should
            be associated with &product-name;. Files of these types then
            will be opened with &product-name;.
          </para>

          <para>
            Set to <literal>1</literal> to enable, <literal>0</literal>
            to disable. Default is 1.
          </para>
        </listitem>

        <listitem>
          <para>
            VBOX_START
          </para>

          <para>
            Specifies whether to start &product-name; right after
            successful installation.
          </para>

          <para>
            Set to <literal>1</literal> to enable, <literal>0</literal>
            to disable. Default is 1.
          </para>
        </listitem>

      </itemizedlist>

    </sect2>

  </sect1>

  <sect1 id="installation-mac">

    <title>Installing on macOS Hosts</title>

    <sect2 id="install-mac-performing">

      <title>Performing the Installation</title>

      <para>
        For macOS hosts, &product-name; ships in a
        <filename>dmg</filename> disk image file. Perform the following
        steps to install on a macOS host:
      </para>

      <orderedlist>

        <listitem>
          <para>
            Double-click on the <filename>dmg</filename> file, to mount
            the contents.
          </para>
        </listitem>

        <listitem>
          <para>
            A window opens, prompting you to double-click on the
            <filename>VirtualBox.pkg</filename> installer file displayed
            in that window.
          </para>
        </listitem>

        <listitem>
          <para>
            This starts the installer, which enables you to select where
            to install &product-name;.
          </para>
        </listitem>

        <listitem>
          <para>
            An &product-name; icon is added to the
            <filename>Applications</filename> folder in the Finder.
          </para>
        </listitem>

      </orderedlist>

    </sect2>

    <sect2 id="install-mac-uninstall">

      <title>Uninstallation</title>

      <para>
        To uninstall &product-name;, open the disk image
        <filename>dmg</filename> file and double-click on the uninstall
        icon shown.
      </para>

    </sect2>

    <sect2 id="install-mac-unattended">

      <title>Unattended Installation</title>

      <para>
        To perform a non-interactive installation of &product-name; you
        can use the command line version of the installer application.
      </para>

      <para>
        Mount the <filename>dmg</filename> disk image file, as described
        in the installation procedure, or use the following command
        line:
      </para>

<screen>hdiutil attach /path/to/VirtualBox-xyz.dmg</screen>

      <para>
        Open a terminal session and run the following command:
      </para>

<screen>sudo installer -pkg /Volumes/VirtualBox/VirtualBox.pkg -target /Volumes/Macintosh\ HD</screen>

    </sect2>

  </sect1>

  <sect1 id="install-linux-host">

    <title>Installing on Linux Hosts</title>

    <sect2 id="install-linux-prereq">

      <title>Prerequisites</title>

      <para>
        For the various versions of Linux that are supported as host
        operating systems, see <xref linkend="hostossupport" />.
      </para>

      <para>
        You may need to install the following packages on your Linux
        system before starting the installation. Some systems will do
        this for you automatically when you install &product-name;.
      </para>

      <itemizedlist>

        <listitem>
          <para>
            Qt 5.3.2 or later. Qt 5.6.2 or later is recommended.
          </para>
        </listitem>

        <listitem>
          <para>
            SDL 1.2.7 or later. This graphics library is typically
            called <filename>libsdl</filename> or similar.
          </para>
        </listitem>

      </itemizedlist>

      <note>
        <para>
          These packages are only required if you want to run the
          &product-name; graphical user interfaces. In particular,
          <command>VirtualBox</command>, the graphical VirtualBox
          Manager, requires both Qt and SDL. If you only want to run
          <command>VBoxHeadless</command>, neither Qt nor SDL are
          required.
        </para>
      </note>

    </sect2>

    <sect2 id="externalkernelmodules">

      <title>The &product-name; Kernel Modules</title>

      <para>
        In order to run other operating systems in virtual machines
        alongside your main operating system, &product-name; needs to
        integrate very tightly with your system. To do this it installs
        a driver module called <command>vboxdrv</command> into the
        system kernel. The kernel is the part of the operating system
        which controls your processor and physical hardware. Without
        this kernel module, you can still use &vbox-mgr; to configure
        virtual machines, but they will not start.
      </para>

      <para>
        Network drivers called <command>vboxnetflt</command> and
        <command>vboxnetadp</command> are also installed. They enable
        virtual machines to make more use of your computer's network
        capabilities and are needed for any virtual machine networking
        beyond the basic NAT mode.
      </para>

      <para>
        Since distributing driver modules separately from the kernel is
        not something which Linux supports well, the &product-name;
        install process creates the modules on the system where they
        will be used. This means that you may need to install some
        software packages from the distribution which are needed for the
        build process. Required packages may include the following:
      </para>

      <itemizedlist>

        <listitem>
          <para>
            GNU compiler (GCC)
          </para>
        </listitem>

        <listitem>
          <para>
            GNU Make (make)
          </para>
        </listitem>

        <listitem>
          <para>
            Kernel header files
          </para>
        </listitem>

      </itemizedlist>

      <para>
        Also ensure that all system updates have been installed and that
        your system is running the most up-to-date kernel for the
        distribution.
      </para>

      <note>
        <para>
          The running kernel and the kernel header files must be updated
          to matching versions.
        </para>
      </note>

      <para>
        The following list includes some details of the required files
        for some common distributions. Start by finding the version name
        of your kernel, using the command <command>uname -r</command> in
        a terminal. The list assumes that you have not changed too much
        from the original installation, in particular that you have not
        installed a different kernel type.
      </para>

      <itemizedlist>

        <listitem>
          <para>
            With Debian and Ubuntu-based distributions, you must install
            the correct version of the
            <filename>linux-headers</filename>, usually whichever of
            <filename>linux-headers-generic</filename>,
            <filename>linux-headers-amd64</filename>,
            <filename>linux-headers-i686</filename> or
            <filename>linux-headers-i686-pae</filename> best matches the
            kernel version name. Also, the
            <filename>linux-kbuild</filename> package if it exists.
            Basic Ubuntu releases should have the correct packages
            installed by default.
          </para>
        </listitem>

        <listitem>
          <para>
            On Fedora, Red Hat, Oracle Linux and many other RPM-based
            systems, the kernel version sometimes has a code of letters
            or a word close to the end of the version name. For example
            "uek" for the Oracle Unbreakable Enterprise Kernel or
            "default" or "desktop" for the standard kernels. In this
            case, the package name is
            <filename>kernel-uek-devel</filename> or equivalent. If
            there is no such code, it is usually
            <filename>kernel-devel</filename>.
          </para>
        </listitem>

        <listitem>
          <para>
            On some SUSE and openSUSE Linux versions, you may need to
            install the <filename>kernel-source</filename> and
            <filename>kernel-syms</filename> packages.
          </para>
        </listitem>

      </itemizedlist>

      <para>
        If you suspect that something has gone wrong with module
        installation, check that your system is set up as described
        above and try running the following command, as root:
      </para>

<screen>rcvboxdrv setup</screen>

      <sect3 id="kernel-modules-efi-secure-boot">

        <title>Kernel Modules and UEFI Secure Boot</title>

        <para>
          If you are running on a system using UEFI (Unified Extensible
          Firmware Interface) Secure Boot, you may need to sign the
          following kernel modules before you can load them:
        </para>

        <itemizedlist>

          <listitem>
            <para>
              <command>vboxdrv</command>
            </para>
          </listitem>

          <listitem>
            <para>
              <command>vboxnetadp</command>
            </para>
          </listitem>

          <listitem>
            <para>
              <command>vboxnetflt</command>
            </para>
          </listitem>

          <listitem>
            <para>
              <command>vboxpci</command>
            </para>
          </listitem>

        </itemizedlist>

        <para>
          See your system documentation for details of the kernel module
          signing process.
        </para>

      </sect3>

    </sect2>

    <sect2 id="install-linux-performing">

      <title>Performing the Installation</title>

      <para>
        &product-name; is available in a number of package formats
        native to various common Linux distributions. See
        <xref linkend="hostossupport"/>. In addition, there is an
        alternative generic installer (.run) which you can use on
        supported Linux distributions.
      </para>

      <sect3 id="install-linux-debian-ubuntu">

        <title>Installing &product-name; from a Debian or Ubuntu Package</title>

        <para>
          Download the appropriate package for your distribution. The
          following example assumes that you are installing to a 64-bit
          Ubuntu Xenial system. Use <command>dpkg</command> to install
          the Debian package,as follows:
        </para>

<screen>sudo dpkg -i virtualbox-<replaceable>version-number</replaceable>_Ubuntu_xenial_amd64.deb</screen>

        <para>
          The installer will also try to build kernel modules suitable
          for the current running kernel. If the build process is not
          successful you will be shown a warning and the package will be
          left unconfigured. Look at
          <filename>/var/log/vbox-install.log</filename> to find out why
          the compilation failed. You may have to install the
          appropriate Linux kernel headers, see
          <xref linkend="externalkernelmodules" />. After correcting any
          problems, run the following command:
        </para>

<screen>sudo rcvboxdrv setup</screen>

        <para>
          This will start a second attempt to build the module.
        </para>

        <para>
          If a suitable kernel module was found in the package or the
          module was successfully built, the installation script will
          attempt to load that module. If this fails, please see
          <xref linkend="ts_linux-kernelmodule-fails-to-load" /> for
          further information.
        </para>

        <para>
          Once &product-name; has been successfully installed and
          configured, you can start it by clicking
          <emphasis role="bold">VirtualBox</emphasis> in your
          <emphasis role="bold">Start</emphasis> menu or from the
          command line. See <xref linkend="startingvboxonlinux" />.
        </para>

      </sect3>

      <sect3 id="install-linux-alt-installer">

        <title>Using the Alternative Generic Installer (VirtualBox.run)</title>

        <para>
          The alternative generic installer performs the following
          steps:
        </para>

        <itemizedlist>

          <listitem>
            <para>
              Unpacks the application files to the target directory
              <filename>/opt/VirtualBox/</filename>, which cannot be
              changed.
            </para>
          </listitem>

          <listitem>
            <para>
              Builds and installs the &product-name; kernel modules:
              <command>vboxdrv</command>, <command>vboxnetflt</command>,
              and <command>vboxnetadp</command>.
            </para>
          </listitem>

          <listitem>
            <para>
              Creates <filename>/sbin/rcvboxdrv</filename>, an init
              script to start the &product-name; kernel module.
            </para>
          </listitem>

          <listitem>
            <para>
              Creates a new system group called
              <literal>vboxusers</literal>.
            </para>
          </listitem>

          <listitem>
            <para>
              Creates symbolic links in <filename>/usr/bin</filename> to
              a shell script <filename>/opt/VirtualBox/VBox</filename>
              which does some sanity checks and dispatches to the actual
              executables: <command>VirtualBox</command>,
              <command>VBoxVRDP</command>,
              <command>VBoxHeadless</command> and
              <command>VBoxManage</command>.
            </para>
          </listitem>

          <listitem>
            <para>
              Creates
              <filename>/etc/udev/rules.d/60-vboxdrv.rules</filename>, a
              description file for udev, if that is present, which makes
              the USB devices accessible to all users in the
              <literal>vboxusers</literal> group.
            </para>
          </listitem>

          <listitem>
            <para>
              Writes the installation directory to
              <filename>/etc/vbox/vbox.cfg</filename>.
            </para>
          </listitem>

        </itemizedlist>

        <para>
          The installer must be executed as root with either
          <literal>install</literal> or <literal>uninstall</literal> as
          the first parameter. For example:
        </para>

<screen>sudo ./VirtualBox.run install</screen>

        <para>
          Or if you do not have the <command>sudo</command> command
          available, run the following as root instead:
        </para>

<screen>./VirtualBox.run install</screen>

        <para>
          Add every user who needs to access USB devices from a
          VirtualBox guests to the group <literal>vboxusers</literal>.
          Either use the OS user management tools or run the following
          command as root:
        </para>

<screen>sudo usermod -a -G vboxusers username</screen>

        <note>
          <para>
            The <command>usermod</command> command of some older Linux
            distributions does not support the <option>-a</option>
            option, which adds the user to the given group without
            affecting membership of other groups. In this case, find out
            the current group memberships with the
            <command>groups</command> command and add all these groups
            in a comma-separated list to the command line after the
            <option>-G</option> option. For example: <command>usermod -G
            <replaceable>group1</replaceable>,<replaceable>group2</replaceable>,vboxusers
            <replaceable>username</replaceable></command>.
          </para>
        </note>

      </sect3>

      <sect3 id="install-linux-manual">

        <title>Performing a Manual Installation</title>

        <para>
          If you cannot use the shell script installer described in
          <xref linkend="install-linux-alt-installer"/>, you can perform
          a manual installation. Run the installer as follows:
        </para>

<screen>./VirtualBox.run --keep --noexec</screen>

        <para>
          This will unpack all the files needed for installation in the
          directory <literal>install</literal> under the current
          directory. The &product-name; application files are contained
          in <filename>VirtualBox.tar.bz2</filename> which you can
          unpack to any directory on your system. For example:
        </para>

<screen>sudo mkdir /opt/VirtualBox
sudo tar jxf ./install/VirtualBox.tar.bz2 -C /opt/VirtualBox</screen>

        <para>
          To run the same example as root, use the following commands:
        </para>

<screen>mkdir /opt/VirtualBox
tar jxf ./install/VirtualBox.tar.bz2 -C /opt/VirtualBox</screen>

        <para>
          The sources for &product-name;'s kernel module are provided in
          the <filename>src</filename> directory. To build the module,
          change to the directory and use the following command:
        </para>

<screen>make</screen>

        <para>
          If everything builds correctly, run the following command to
          install the module to the appropriate module directory:
        </para>

<screen>sudo make install</screen>

        <para>
          In case you do not have sudo, switch the user account to root
          and run the following command:
        </para>

<screen>make install</screen>

        <para>
          The &product-name; kernel module needs a device node to
          operate. The above <command>make</command> command will tell
          you how to create the device node, depending on your Linux
          system. The procedure is slightly different for a classical
          Linux setup with a <filename>/dev</filename> directory, a
          system with the now deprecated <command>devfs</command> and a
          modern Linux system with <command>udev</command>.
        </para>

        <para>
          On certain Linux distributions, you might experience
          difficulties building the module. You will have to analyze the
          error messages from the build system to diagnose the cause of
          the problems. In general, make sure that the correct Linux
          kernel sources are used for the build process.
        </para>

        <para>
          Note that the <filename>/dev/vboxdrv</filename> kernel module
          device node must be owned by root:root and must be
          read/writable only for the user.
        </para>

        <para>
          Next, you install the system initialization script for the
          kernel module and activate the initialization script using the
          right method for your distribution, as follows:
        </para>

<screen>cp /opt/VirtualBox/vboxdrv.sh /sbin/rcvboxdrv</screen>

        <para>
          This example assumes you installed &product-name; to the
          <filename>/opt/VirtualBox</filename> directory.
        </para>

        <para>
          Create a configuration file for &product-name;, as follows:
        </para>

<screen>mkdir /etc/vbox
echo INSTALL_DIR=/opt/VirtualBox &gt; /etc/vbox/vbox.cfg</screen>

        <para>
          Create the following symbolic links:
        </para>

<screen>ln -sf /opt/VirtualBox/VBox.sh /usr/bin/VirtualBox
ln -sf /opt/VirtualBox/VBox.sh /usr/bin/VBoxManage
ln -sf /opt/VirtualBox/VBox.sh /usr/bin/VBoxHeadless</screen>

      </sect3>

      <sect3 id="install-linux-update-uninstall">

        <title>Updating and Uninstalling &product-name;</title>

        <para>
          Before updating or uninstalling &product-name;, you must
          terminate any virtual machines which are currently running and
          exit the &product-name; or VBoxSVC applications. To update
          &product-name;, simply run the installer of the updated
          version. To uninstall &product-name;, run the installer as
          follows:
        </para>

<screen>sudo ./VirtualBox.run uninstall</screen>

        <para>
          As root, you can use the following command:
        </para>

<screen>./VirtualBox.run uninstall</screen>

        <para>
          You can uninstall the .run package as follows:
        </para>

<screen>/opt/VirtualBox/uninstall.sh</screen>

        <para>
          To manually uninstall &product-name;, perform the manual
          installation steps in reverse order.
        </para>

      </sect3>

      <sect3 id="install-linux-debian-automatic">

        <title>Automatic Installation of Debian Packages</title>

        <para>
          The Debian packages will request some user feedback when
          installed for the first time. The debconf system is used to
          perform this task. To prevent any user interaction during
          installation, default values can be defined. A file
          <literal>vboxconf</literal> can contain the following debconf
          settings:
        </para>

<screen>virtualbox virtualbox/module-compilation-allowed boolean true
virtualbox virtualbox/delete-old-modules boolean true</screen>

        <para>
          The first line enables compilation of the vboxdrv kernel
          module if no module was found for the current kernel. The
          second line enables the package to delete any old vboxdrv
          kernel modules compiled by previous installations.
        </para>

        <para>
          These default settings can be applied prior to the
          installation of the &product-name; Debian package, as follows:
        </para>

<screen>debconf-set-selections vboxconf</screen>

        <para>
          In addition there are some common configuration options that
          can be set prior to the installation. See
          <xref
        linkend="linux_install_opts" />.
        </para>

      </sect3>

      <sect3 id="install-linux-rpm-automatic">

        <title>Automatic Installation of RPM Packages</title>

        <para>
          The RPM format does not provide a configuration system
          comparable to the debconf system. See
          <xref linkend="linux_install_opts" /> for how to set some
          common installation options provided by &product-name;.
        </para>

      </sect3>

      <sect3 id="linux_install_opts">

        <title>Automatic Installation Options</title>

        <para>
          To configure the installation process for .deb and .rpm
          packages, you can create a response file named
          <filename>/etc/default/virtualbox</filename>. The automatic
          generation of the udev rule can be prevented with the
          following setting:
        </para>

<screen>INSTALL_NO_UDEV=1</screen>

        <para>
          The creation of the group vboxusers can be prevented as
          follows:
        </para>

<screen>INSTALL_NO_GROUP=1</screen>

        <para>
          If the following line is specified, the package installer will
          not try to build the <command>vboxdrv</command> kernel module
          if no module fitting the current kernel was found.
        </para>

<screen>INSTALL_NO_VBOXDRV=1</screen>

      </sect3>

    </sect2>

    <sect2 id="install-linux-vboxusers">

      <title>The vboxusers Group</title>

      <para>
        The Linux installers create the system user group
        <literal>vboxusers</literal> during installation. Any system
        user who is going to use USB devices from &product-name; guests
        must be a member of that group. A user can be made a member of
        the group <literal>vboxusers</literal> either by using the
        desktop user and group tools, or with the following command:
      </para>

<screen>sudo usermod -a -G vboxusers username</screen>

    </sect2>

    <sect2 id="startingvboxonlinux">

      <title>Starting &product-name; on Linux</title>

      <para>
        The easiest way to start an &product-name; program is by running
        the program of your choice (<command>VirtualBox</command>,
        <command>VBoxManage</command>, or
        <command>VBoxHeadless</command>) from a terminal. These are
        symbolic links to <command>VBox.sh</command> that start the
        required program for you.
      </para>

      <para>
        The following detailed instructions should only be of interest
        if you wish to execute &product-name; without installing it
        first. You should start by compiling the
        <command>vboxdrv</command> kernel module and inserting it into
        the Linux kernel. &product-name; consists of a service daemon,
        <command>VBoxSVC</command>, and several application programs.
        The daemon is automatically started if necessary. All
        &product-name; applications will communicate with the daemon
        through UNIX local domain sockets. There can be multiple daemon
        instances under different user accounts and applications can
        only communicate with the daemon running under the user account
        as the application. The local domain socket resides in a
        subdirectory of your system's directory for temporary files
        called <filename>.vbox-&lt;username&gt;-ipc</filename>. In case
        of communication problems or server startup problems, you may
        try to remove this directory.
      </para>

      <para>
        All &product-name; applications (<command>VirtualBox</command>,
        <command>VBoxManage</command>, and
        <command>VBoxHeadless</command>) require the &product-name;
        directory to be in the library path, as follows:
      </para>

<screen>LD_LIBRARY_PATH=. ./VBoxManage showvminfo "Windows XP"</screen>

    </sect2>

  </sect1>

  <sect1 id="install-solaris-host">

    <title>Installing on Oracle Solaris Hosts</title>

    <para>
      For the specific versions of Oracle Solaris that are supported as
      host operating systems, see <xref linkend="hostossupport" />.
    </para>

    <para>
      If you have a previously installed instance of &product-name; on
      your Oracle Solaris host, please uninstall it first before
      installing a new instance. See
      <xref linkend="uninstall-solaris-host" /> for uninstall
      instructions.
    </para>

    <sect2 id="install-solaris-performing">

      <title>Performing the Installation</title>

      <para>
        &product-name; is available as a standard Oracle Solaris
        package. Download the &product-name; SunOS package, which
        includes the 64-bit version of &product-name;. <emphasis>The
        installation must be performed as root and from the global
        zone</emphasis>. This is because the &product-name; installer
        loads kernel drivers, which cannot be done from non-global
        zones. To verify which zone you are currently in, execute the
        <command>zonename</command> command.
      </para>

      <para>
        To start installation, run the following commands:
      </para>

<screen>gunzip -cd VirtualBox-<replaceable>version-number</replaceable>-SunOS.tar.gz | tar xvf -</screen>

      <para>
        The &product-name; kernel package is integrated into the main
        package. Install the &product-name; package as follows:
      </para>

<screen>pkgadd -d VirtualBox-<replaceable>version-number</replaceable>-SunOS.pkg</screen>

      <para>
        The installer will then prompt you to enter the package you wish
        to install. Choose <emphasis role="bold">1</emphasis> or
        <emphasis role="bold">all</emphasis> and proceed. Next the
        installer will ask you if you want to allow the postinstall
        script to be executed. Choose <emphasis role="bold">y</emphasis>
        and proceed, as it is essential to execute this script which
        installs the &product-name; kernel module. Following this
        confirmation the installer will install &product-name; and
        execute the postinstall setup script.
      </para>

      <para>
        Once the postinstall script has been executed your installation
        is now complete. You may now safely delete the uncompressed
        package and <filename>autoresponse</filename> files from your
        system. &product-name; is installed in
        <filename>/opt/VirtualBox</filename>.
      </para>

      <note>
        <para>
          If you need to use &product-name; from non-global zones, see
          <xref linkend="solaris-zones" />.
        </para>
      </note>

    </sect2>

    <sect2 id="install-solaris-vboxuser">

      <title>The vboxuser Group</title>

      <para>
        The installer creates the system user group
        <literal>vboxuser</literal> during installation for Oracle
        Solaris hosts that support the USB features required by
        &product-name;. Any system user who is going to use USB devices
        from &product-name; guests must be a member of this group. A
        user can be made a member of this group either by using the
        desktop user and group tools or by running the following command
        as root:
      </para>

<screen>usermod -G vboxuser username</screen>

      <para>
        Note that adding an active user to the
        <literal>vboxuser</literal> group will require the user to log
        out and then log in again. This should be done manually after
        successful installation of the package.
      </para>

    </sect2>

    <sect2 id="install-solaris-starting">

      <title>Starting &product-name; on Oracle Solaris</title>

      <para>
        The easiest way to start an &product-name; program is by running
        the program of your choice (<command>VirtualBox</command>,
        <command>VBoxManage</command>, or
        <command>VBoxHeadless</command>) from a terminal. These are
        symbolic links to <command>VBox.sh</command> that start the
        required program for you.
      </para>

      <para>
        Alternatively, you can directly invoke the required programs
        from <filename>/opt/VirtualBox</filename>. Using the links
        provided is easier as you do not have to enter the full path.
      </para>

      <para>
        You can configure some elements of the
        <command>VirtualBox</command> Qt GUI, such as fonts and colours,
        by running <command>VBoxQtconfig</command> from the terminal.
      </para>

    </sect2>

    <sect2 id="uninstall-solaris-host">

      <title>Uninstallation</title>

      <para>
        Uninstallation of &product-name; on Oracle Solaris requires root
        permissions. To perform the uninstallation, start a root
        terminal session and run the following command:
      </para>

<screen>pkgrm SUNWvbox</screen>

      <para>
        After confirmation, this will remove &product-name; from your
        system.
      </para>

    </sect2>

    <sect2 id="install-solaris-unattended">

      <title>Unattended Installation</title>

      <para>
        To perform a non-interactive installation of &product-name;
        there is a response file named
        <filename>autoresponse</filename>. The installer uses this for
        responses to inputs, rather than prompting the user.
      </para>

      <para>
        Extract the tar.gz package as described in
        <xref linkend="install-solaris-performing"/>. Then open a root
        terminal session and run the following command:
      </para>

<screen>pkgadd -d VirtualBox-<replaceable>version-number</replaceable>-SunOS-x86 -n -a autoresponse SUNWvbox</screen>

      <para>
        To perform a non-interactive uninstallation, open a root
        terminal session and run the following command:
      </para>

<screen>pkgrm -n -a /opt/VirtualBox/autoresponse SUNWvbox</screen>

    </sect2>

    <sect2 id="solaris-zones">

      <title>Configuring a Zone for Running &product-name;</title>

      <para>
        Assuming that &product-name; has already been installed into
        your zone, you need to give the zone access to &product-name;'s
        device node. This is done by performing the following steps.
        Start a root terminal and run the following command:
      </para>

<screen>zonecfg -z <replaceable>vboxzone</replaceable></screen>

      <para>
        Replace <replaceable>vboxzone</replaceable> with the name of the
        zone where you intend to run &product-name;.
      </para>

      <para>
        Use <command>zonecfg</command> to add the
        <literal>device</literal> resource and <literal>match</literal>
        properties to the zone, as follows:
      </para>

<screen>zonecfg:vboxzone&gt;add device
zonecfg:vboxzone:device&gt;set match=/dev/vboxdrv
zonecfg:vboxzone:device&gt;end
zonecfg:vboxzone&gt;add device
zonecfg:vboxzone:device&gt;set match=/dev/vboxdrvu
zonecfg:vboxzone:device&gt;end
zonecfg:vboxzone&gt;exit</screen>

      <para>
        On Oracle Solaris 11 or later, you may also add a device for
        <filename>/dev/vboxusbmon</filename>, similar to that shown
        above.
      </para>

      <para>
        If you are not using sparse root zones, you will need to
        loopback mount <filename>/opt/VirtualBox</filename> from the
        global zone into the non-global zone at the same path. This is
        specified below using the <literal>dir</literal> attribute and
        the <literal>special</literal> attribute. For example:
      </para>

<screen>zonecfg:vboxzone&gt;add fs
zonecfg:vboxzone:device&gt;set dir=/opt/VirtualBox
zonecfg:vboxzone:device&gt;set special=/opt/VirtualBox
zonecfg:vboxzone:device&gt;set type=lofs
zonecfg:vboxzone:device&gt;end
zonecfg:vboxzone&gt;exit</screen>

      <para>
        Reboot the zone using <command>zoneadm</command> and you should
        be able to run &product-name; from within the configured zone.
      </para>

    </sect2>

  </sect1>

  <sect1 id="install-ext-pack">

    <title>Installing an Extension Pack</title>

    <para>
      Extension packs provide extra functionality to the &product-name;
      base package, such as extended USB device support and cloud
      integration features. See <xref linkend="intro-installing"/>.
    </para>

    <para>
      To install an &product-name; extension pack, do the following:
    </para>

    <orderedlist>

      <listitem>
        <para>
          Double-click on the extension package file name.
        </para>

        <para>
          &product-name; extension packs have a
          <filename>.vbox-extpack</filename> file name extension.
        </para>
      </listitem>

      <listitem>
        <para>
          Follow the on-screen instructions to install the extension
          pack.
        </para>
      </listitem>

    </orderedlist>

    <para>
      You can also use the Extension Pack Manager tool to install an
      extension pack. See <xref linkend="install-ext-pack-manager"/>.
    </para>

    <sect2 id="install-ext-pack-manager">

      <title>The Extension Pack Manager</title>

      <para>
        Extension packs can be installed and managed using the
        <emphasis role="bold">Extension Pack Manager</emphasis> tool in
        &vbox-mgr;.
      </para>

      <para>
        The Extension Pack Manager lists the extension packs that are
        currently installed on the host, and enables you to install and
        uninstall extension packs.
      </para>

      <para>
        To display the Extension Pack Manager, go to the global
        <emphasis role="bold">Tools</emphasis> menu and click
        <emphasis role="bold">Extensions</emphasis>. The Extension Pack
        Manager is shown.
      </para>

      <para>
        To install an extension pack using the Extension Pack Manager,
        click <emphasis role="bold">Install</emphasis> and select an
        extension package file. The extension pack is installed on the
        host and listed in Extension Pack Manager.
      </para>

      <para>
        To uninstall an extension pack with the Extension Pack Manager,
        do the following:
      </para>

      <orderedlist>

        <listitem>
          <para>
            Select the extension pack in the Extension Pack Manager
            window and click <emphasis role="bold">Uninstall</emphasis>.
          </para>
        </listitem>

        <listitem>
          <para>
            Click <emphasis role="bold">Remove</emphasis> in the prompt
            dialog.
          </para>

          <para>
            The extension pack is uninstalled from the host and removed
            from the Extension Pack Manager.
          </para>
        </listitem>

      </orderedlist>

      <para>
        Alternatively, you can use the <command>VBoxManage</command>
        command line to install and manage &product-name; extension
        packs. See <xref linkend="vboxmanage-extpack" />.
      </para>

    </sect2>

  </sect1>

</chapter>