configure.vbs@ 74325

Last change on this file since 74325 was 73854, checked in by vboxsync, 6 years ago
configure.vbs: hack for disabling any libopus use until the necessary logic is added to find it (i.e. just like with libvpx)
Property svn:eol-style set to `CRLF` Property svn:keywords set to `Id`
File size: 74.7 KB

Line
1	' $Id: configure.vbs 73854 2018-08-23 08:54:57Z vboxsync $
2	'' @file
3	' The purpose of this script is to check for all external tools, headers, and
4	' libraries VBox OSE depends on.
5	'
6	' The script generates the build configuration file 'AutoConfig.kmk' and the
7	' environment setup script 'env.bat'. A log of what has been done is
8	' written to 'configure.log'.
9	'
10
11	'
12	' Copyright (C) 2006-2017 Oracle Corporation
13	'
14	' This file is part of VirtualBox Open Source Edition (OSE), as
15	' available from http://www.virtualbox.org. This file is free software;
16	' you can redistribute it and/or modify it under the terms of the GNU
17	' General Public License (GPL) as published by the Free Software
18	' Foundation, in version 2 as it comes in the "COPYING" file of the
19	' VirtualBox OSE distribution. VirtualBox OSE is distributed in the
20	' hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
21	'
22
23
24	'*****************************************************************************
25	'* Global Variables *
26	'*****************************************************************************
27	dim g_strPath, g_strEnvFile, g_strLogFile, g_strCfgFile, g_strShellOutput
28	g_strPath = Left(Wscript.ScriptFullName, Len(Wscript.ScriptFullName) - Len("\configure.vbs"))
29	g_strEnvFile = g_strPath & "\env.bat"
30	g_strCfgFile = g_strPath & "\AutoConfig.kmk"
31	g_strLogFile = g_strPath & "\configure.log"
32	'g_strTmpFile = g_strPath & "\configure.tmp"
33
34	dim g_objShell, g_objFileSys
35	Set g_objShell = WScript.CreateObject("WScript.Shell")
36	Set g_objFileSys = WScript.CreateObject("Scripting.FileSystemObject")
37
38	dim g_strPathkBuild, g_strPathkBuildBin, g_strPathDev, g_strPathVCC, g_strPathPSDK, g_strVerPSDK, g_strPathDDK, g_strSubOutput
39	g_strPathkBuild = ""
40	g_strPathDev = ""
41	g_strPathVCC = ""
42	g_strPathPSDK = ""
43	g_strPathDDK = ""
44
45	dim g_strTargetArch
46	g_strTargetArch = ""
47
48	dim g_strHostArch
49	g_strHostArch = ""
50
51	dim g_blnDisableCOM, g_strDisableCOM
52	g_blnDisableCOM = False
53	g_strDisableCOM = ""
54
55	' The internal mode is primarily for skipping some large libraries.
56	dim g_blnInternalMode
57	g_blnInternalMode = False
58
59	' Whether to try the internal stuff first or last.
60	dim g_blnInternalFirst
61	g_blnInternalFirst = True
62
63
64
65	''
66	' Converts to unix slashes
67	function UnixSlashes(str)
68	UnixSlashes = replace(str, "\", "/")
69	end function
70
71
72	''
73	' Converts to dos slashes
74	function DosSlashes(str)
75	DosSlashes = replace(str, "/", "\")
76	end function
77
78
79	''
80	' Read a file (typically the tmp file) into a string.
81	function FileToString(strFilename)
82	const ForReading = 1, TristateFalse = 0
83	dim objLogFile, str
84
85	set objFile = g_objFileSys.OpenTextFile(DosSlashes(strFilename), ForReading, False, TristateFalse)
86	str = objFile.ReadAll()
87	objFile.Close()
88
89	FileToString = str
90	end function
91
92
93	''
94	' Deletes a file
95	sub FileDelete(strFilename)
96	if g_objFileSys.FileExists(DosSlashes(strFilename)) then
97	g_objFileSys.DeleteFile(DosSlashes(strFilename))
98	end if
99	end sub
100
101
102	''
103	' Appends a line to an ascii file.
104	sub FileAppendLine(strFilename, str)
105	const ForAppending = 8, TristateFalse = 0
106	dim objFile
107
108	set objFile = g_objFileSys.OpenTextFile(DosSlashes(strFilename), ForAppending, True, TristateFalse)
109	objFile.WriteLine(str)
110	objFile.Close()
111	end sub
112
113
114	''
115	' Checks if the file exists.
116	function FileExists(strFilename)
117	FileExists = g_objFileSys.FileExists(DosSlashes(strFilename))
118	end function
119
120
121	''
122	' Checks if the directory exists.
123	function DirExists(strDirectory)
124	DirExists = g_objFileSys.FolderExists(DosSlashes(strDirectory))
125	end function
126
127
128	''
129	' Checks if this is a WOW64 process.
130	function IsWow64()
131	if g_objShell.Environment("PROCESS")("PROCESSOR_ARCHITEW6432") <> "" then
132	IsWow64 = 1
133	else
134	IsWow64 = 0
135	end if
136	end function
137
138
139	''
140	' Returns a reverse sorted array (strings).
141	function ArraySortStrings(arrStrings)
142	for i = LBound(arrStrings) to UBound(arrStrings)
143	str1 = arrStrings(i)
144	for j = i + 1 to UBound(arrStrings)
145	str2 = arrStrings(j)
146	if StrComp(str2, str1) < 0 then
147	arrStrings(j) = str1
148	str1 = str2
149	end if
150	next
151	arrStrings(i) = str1
152	next
153	ArraySortStrings = arrStrings
154	end function
155
156
157	''
158	' Prints a string array.
159	sub ArrayPrintStrings(arrStrings, strPrefix)
160	for i = LBound(arrStrings) to UBound(arrStrings)
161	Print strPrefix & "arrStrings(" & i & ") = '" & arrStrings(i) & "'"
162	next
163	end sub
164
165
166	''
167	' Returns a reverse sorted array (strings).
168	function ArrayRSortStrings(arrStrings)
169	' Sort it.
170	arrStrings = ArraySortStrings(arrStrings)
171
172	' Reverse the array.
173	cnt = UBound(arrStrings) - LBound(arrStrings) + 1
174	if cnt > 0 then
175	j = UBound(arrStrings)
176	iHalf = Fix(LBound(arrStrings) + cnt / 2)
177	for i = LBound(arrStrings) to iHalf - 1
178	strTmp = arrStrings(i)
179	arrStrings(i) = arrStrings(j)
180	arrStrings(j) = strTmp
181	j = j - 1
182	next
183	end if
184	ArrayRSortStrings = arrStrings
185	end function
186
187
188	''
189	' Returns the input array with the string appended.
190	' Note! There must be some better way of doing this...
191	function ArrayAppend(arr, str)
192	dim i, cnt
193	cnt = UBound(arr) - LBound(arr) + 1
194	redim arrRet(cnt)
195	for i = LBound(arr) to UBound(arr)
196	arrRet(i) = arr(i)
197	next
198	arrRet(UBound(arr) + 1) = str
199	ArrayAppend = arrRet
200	end function
201
202
203
204	''
205	' Translates a register root name to a value
206	function RegTransRoot(strRoot)
207	const HKEY_LOCAL_MACHINE = &H80000002
208	const HKEY_CURRENT_USER = &H80000001
209	select case strRoot
210	case "HKLM"
211	RegTransRoot = HKEY_LOCAL_MACHINE
212	case "HKCU"
213	RegTransRoot = HKEY_CURRENT_USER
214	case else
215	MsgFatal "RegTransRoot: Unknown root: '" & strRoot & "'"
216	RegTransRoot = 0
217	end select
218	end function
219
220
221	'' The registry globals
222	dim g_objReg, g_objRegCtx
223	dim g_blnRegistry
224	g_blnRegistry = false
225
226
227	''
228	' Init the register provider globals.
229	function RegInit()
230	RegInit = false
231	On Error Resume Next
232	if g_blnRegistry = false then
233	set g_objRegCtx = CreateObject("WbemScripting.SWbemNamedValueSet")
234	' Comment out the following for lines if the cause trouble on your windows version.
235	if IsWow64() then
236	g_objRegCtx.Add "__ProviderArchitecture", 64
237	g_objRegCtx.Add "__RequiredArchitecture", true
238	end if
239	set objLocator = CreateObject("Wbemscripting.SWbemLocator")
240	set objServices = objLocator.ConnectServer("", "root\default", "", "", , , , g_objRegCtx)
241	set g_objReg = objServices.Get("StdRegProv")
242	g_blnRegistry = true
243	end if
244	RegInit = true
245	end function
246
247
248	''
249	' Gets a value from the registry. Returns "" if string wasn't found / valid.
250	function RegGetString(strName)
251	RegGetString = ""
252	if RegInit() then
253	dim strRoot, strKey, strValue
254	dim iRoot
255
256	' split up into root, key and value parts.
257	strRoot = left(strName, instr(strName, "\") - 1)
258	strKey = mid(strName, instr(strName, "\") + 1, instrrev(strName, "\") - instr(strName, "\"))
259	strValue = mid(strName, instrrev(strName, "\") + 1)
260
261	' Must use ExecMethod to call the GetStringValue method because of the context.
262	Set InParms = g_objReg.Methods_("GetStringValue").Inparameters
263	InParms.hDefKey = RegTransRoot(strRoot)
264	InParms.sSubKeyName = strKey
265	InParms.sValueName = strValue
266	On Error Resume Next
267	set OutParms = g_objReg.ExecMethod_("GetStringValue", InParms, , g_objRegCtx)
268	if OutParms.ReturnValue = 0 then
269	RegGetString = OutParms.sValue
270	end if
271	else
272	' fallback mode
273	On Error Resume Next
274	RegGetString = g_objShell.RegRead(strName)
275	end if
276	end function
277
278
279	''
280	' Returns an array of subkey strings.
281	function RegEnumSubKeys(strRoot, strKeyPath)
282	dim iRoot
283	iRoot = RegTransRoot(strRoot)
284	RegEnumSubKeys = Array()
285
286	if RegInit() then
287	' Must use ExecMethod to call the EnumKey method because of the context.
288	Set InParms = g_objReg.Methods_("EnumKey").Inparameters
289	InParms.hDefKey = RegTransRoot(strRoot)
290	InParms.sSubKeyName = strKeyPath
291	On Error Resume Next
292	set OutParms = g_objReg.ExecMethod_("EnumKey", InParms, , g_objRegCtx)
293	if OutParms.ReturnValue = 0 then
294	RegEnumSubKeys = OutParms.sNames
295	end if
296	else
297	' fallback mode
298	dim objReg, rc, arrSubKeys
299	set objReg = GetObject("winmgmts:{impersonationLevel=impersonate}!\\.\root\default:StdRegProv")
300	On Error Resume Next
301	rc = objReg.EnumKey(iRoot, strKeyPath, arrSubKeys)
302	if rc = 0 then
303	RegEnumSubKeys = arrSubKeys
304	end if
305	end if
306	end function
307
308
309	''
310	' Returns an array of full path subkey strings.
311	function RegEnumSubKeysFull(strRoot, strKeyPath)
312	dim arrTmp
313	arrTmp = RegEnumSubKeys(strRoot, strKeyPath)
314	for i = LBound(arrTmp) to UBound(arrTmp)
315	arrTmp(i) = strKeyPath & "\" & arrTmp(i)
316	next
317	RegEnumSubKeysFull = arrTmp
318	end function
319
320
321	''
322	' Returns an rsorted array of subkey strings.
323	function RegEnumSubKeysRSort(strRoot, strKeyPath)
324	RegEnumSubKeysRSort = ArrayRSortStrings(RegEnumSubKeys(strRoot, strKeyPath))
325	end function
326
327
328	''
329	' Returns an rsorted array of subkey strings.
330	function RegEnumSubKeysFullRSort(strRoot, strKeyPath)
331	RegEnumSubKeysFullRSort = ArrayRSortStrings(RegEnumSubKeysFull(strRoot, strKeyPath))
332	end function
333
334
335	''
336	' Gets the commandline used to invoke the script.
337	function GetCommandline()
338	dim str, i
339
340	'' @todo find an api for querying it instead of reconstructing it like this...
341	GetCommandline = "cscript configure.vbs"
342	for i = 1 to WScript.Arguments.Count
343	str = WScript.Arguments.Item(i - 1)
344	if str = "" then
345	str = """"""
346	elseif (InStr(1, str, " ")) then
347	str = """" & str & """"
348	end if
349	GetCommandline = GetCommandline & " " & str
350	next
351	end function
352
353
354	''
355	' Gets an environment variable.
356	function EnvGet(strName)
357	EnvGet = g_objShell.Environment("PROCESS")(strName)
358	end function
359
360
361	''
362	' Sets an environment variable.
363	sub EnvSet(strName, strValue)
364	g_objShell.Environment("PROCESS")(strName) = strValue
365	LogPrint "EnvSet: " & strName & "=" & strValue
366	end sub
367
368
369	''
370	' Appends a string to an environment variable
371	sub EnvAppend(strName, strValue)
372	dim str
373	str = g_objShell.Environment("PROCESS")(strName)
374	g_objShell.Environment("PROCESS")(strName) = str & strValue
375	LogPrint "EnvAppend: " & strName & "=" & str & strValue
376	end sub
377
378
379	''
380	' Prepends a string to an environment variable
381	sub EnvPrepend(strName, strValue)
382	dim str
383	str = g_objShell.Environment("PROCESS")(strName)
384	g_objShell.Environment("PROCESS")(strName) = strValue & str
385	LogPrint "EnvPrepend: " & strName & "=" & strValue & str
386	end sub
387
388	''
389	' Gets the first non-empty environment variable of the given two.
390	function EnvGetFirst(strName1, strName2)
391	EnvGetFirst = g_objShell.Environment("PROCESS")(strName1)
392	if EnvGetFirst = "" then
393	EnvGetFirst = g_objShell.Environment("PROCESS")(strName2)
394	end if
395	end function
396
397
398	''
399	' Get the path of the parent directory. Returns root if root was specified.
400	' Expects abs path.
401	function PathParent(str)
402	PathParent = g_objFileSys.GetParentFolderName(DosSlashes(str))
403	end function
404
405
406	''
407	' Strips the filename from at path.
408	function PathStripFilename(str)
409	PathStripFilename = g_objFileSys.GetParentFolderName(DosSlashes(str))
410	end function
411
412
413	''
414	' Get the abs path, use the short version if necessary.
415	function PathAbs(str)
416	strAbs = g_objFileSys.GetAbsolutePathName(DosSlashes(str))
417	strParent = g_objFileSys.GetParentFolderName(strAbs)
418	if strParent = "" then
419	PathAbs = strAbs
420	else
421	strParent = PathAbs(strParent) ' Recurse to resolve parent paths.
422	PathAbs = g_objFileSys.BuildPath(strParent, g_objFileSys.GetFileName(strAbs))
423
424	dim obj
425	set obj = Nothing
426	if FileExists(PathAbs) then
427	set obj = g_objFileSys.GetFile(PathAbs)
428	elseif DirExists(PathAbs) then
429	set obj = g_objFileSys.GetFolder(PathAbs)
430	end if
431
432	if not (obj is nothing) then
433	for each objSub in obj.ParentFolder.SubFolders
434	if obj.Name = objSub.Name or obj.ShortName = objSub.ShortName then
435	if InStr(1, objSub.Name, " ") > 0 _
436	Or InStr(1, objSub.Name, "&") > 0 _
437	Or InStr(1, objSub.Name, "$") > 0 _
438	then
439	PathAbs = g_objFileSys.BuildPath(strParent, objSub.ShortName)
440	if InStr(1, PathAbs, " ") > 0 _
441	Or InStr(1, PathAbs, "&") > 0 _
442	Or InStr(1, PathAbs, "$") > 0 _
443	then
444	MsgFatal "PathAbs(" & str & ") attempted to return filename with problematic " _
445	& "characters in it (" & PathAbs & "). The tool/sdk referenced will probably " _
446	& "need to be copied or reinstalled to a location without 'spaces', '$', ';' " _
447	& "or '&' in the path name. (Unless it's a problem with this script of course...)"
448	end if
449	else
450	PathAbs = g_objFileSys.BuildPath(strParent, objSub.Name)
451	end if
452	exit for
453	end if
454	next
455	end if
456	end if
457	end function
458
459
460	''
461	' Get the abs path, use the long version.
462	function PathAbsLong(str)
463	strAbs = g_objFileSys.GetAbsolutePathName(DosSlashes(str))
464	strParent = g_objFileSys.GetParentFolderName(strAbs)
465	if strParent = "" then
466	PathAbsLong = strAbs
467	else
468	strParent = PathAbsLong(strParent) ' Recurse to resolve parent paths.
469	PathAbsLong = g_objFileSys.BuildPath(strParent, g_objFileSys.GetFileName(strAbs))
470
471	dim obj
472	set obj = Nothing
473	if FileExists(PathAbsLong) then
474	set obj = g_objFileSys.GetFile(PathAbsLong)
475	elseif DirExists(PathAbsLong) then
476	set obj = g_objFileSys.GetFolder(PathAbsLong)
477	end if
478
479	if not (obj is nothing) then
480	for each objSub in obj.ParentFolder.SubFolders
481	if obj.Name = objSub.Name or obj.ShortName = objSub.ShortName then
482	PathAbsLong = g_objFileSys.BuildPath(strParent, objSub.Name)
483	exit for
484	end if
485	next
486	end if
487	end if
488	end function
489
490
491	''
492	' Executes a command in the shell catching output in g_strShellOutput
493	function Shell(strCommand, blnBoth)
494	dim strShell, strCmdline, objExec, str
495
496	strShell = g_objShell.ExpandEnvironmentStrings("%ComSpec%")
497	if blnBoth = true then
498	strCmdline = strShell & " /c " & strCommand & " 2>&1"
499	else
500	strCmdline = strShell & " /c " & strCommand & " 2>nul"
501	end if
502
503	LogPrint "# Shell: " & strCmdline
504	Set objExec = g_objShell.Exec(strCmdLine)
505	g_strShellOutput = objExec.StdOut.ReadAll()
506	objExec.StdErr.ReadAll()
507	do while objExec.Status = 0
508	Wscript.Sleep 20
509	g_strShellOutput = g_strShellOutput & objExec.StdOut.ReadAll()
510	objExec.StdErr.ReadAll()
511	loop
512
513	LogPrint "# Status: " & objExec.ExitCode
514	LogPrint "# Start of Output"
515	LogPrint g_strShellOutput
516	LogPrint "# End of Output"
517
518	Shell = objExec.ExitCode
519	end function
520
521
522	''
523	' Try find the specified file in the path.
524	function Which(strFile)
525	dim strPath, iStart, iEnd, str
526
527	' the path
528	strPath = EnvGet("Path")
529	iStart = 1
530	do while iStart <= Len(strPath)
531	iEnd = InStr(iStart, strPath, ";")
532	if iEnd <= 0 then iEnd = Len(strPath) + 1
533	if iEnd > iStart then
534	str = Mid(strPath, iStart, iEnd - iStart) & "/" & strFile
535	if FileExists(str) then
536	Which = str
537	exit function
538	end if
539	end if
540	iStart = iEnd + 1
541	loop
542
543	' registry or somewhere?
544
545	Which = ""
546	end function
547
548
549	''
550	' Append text to the log file and echo it to stdout
551	sub Print(str)
552	LogPrint str
553	Wscript.Echo str
554	end sub
555
556
557	''
558	' Prints a test header
559	sub PrintHdr(strTest)
560	LogPrint "*** Checking for " & strTest & " ***"
561	Wscript.Echo "Checking for " & StrTest & "..."
562	end sub
563
564
565	''
566	' Prints a success message
567	sub PrintResultMsg(strTest, strResult)
568	LogPrint "** " & strTest & ": " & strResult
569	Wscript.Echo " Found "& strTest & ": " & strResult
570	end sub
571
572
573	''
574	' Prints a successfully detected path
575	sub PrintResult(strTest, strPath)
576	strLongPath = PathAbsLong(strPath)
577	if PathAbs(strPath) <> strLongPath then
578	LogPrint "** " & strTest & ": " & strPath & " (" & UnixSlashes(strLongPath) & ")"
579	Wscript.Echo " Found " & strTest & ": " & strPath & " (" & UnixSlashes(strLongPath) & ")"
580	else
581	LogPrint "** " & strTest & ": " & strPath
582	Wscript.Echo " Found " & strTest & ": " & strPath
583	end if
584	end sub
585
586
587	''
588	' Warning message.
589	sub MsgWarning(strMsg)
590	Print "warning: " & strMsg
591	end sub
592
593
594	''
595	' Fatal error.
596	sub MsgFatal(strMsg)
597	Print "fatal error: " & strMsg
598	Wscript.Quit
599	end sub
600
601
602	''
603	' Error message, fatal unless flag to ignore errors is given.
604	sub MsgError(strMsg)
605	Print "error: " & strMsg
606	if g_blnInternalMode = False then
607	Wscript.Quit
608	end if
609	end sub
610
611
612	''
613	' Write a log header with some basic info.
614	sub LogInit
615	FileDelete g_strLogFile
616	LogPrint "# Log file generated by " & Wscript.ScriptFullName
617	for i = 1 to WScript.Arguments.Count
618	LogPrint "# Arg #" & i & ": " & WScript.Arguments.Item(i - 1)
619	next
620	if Wscript.Arguments.Count = 0 then
621	LogPrint "# No arguments given"
622	end if
623	LogPrint "# Reconstructed command line: " & GetCommandline()
624
625	' some Wscript stuff
626	LogPrint "# Wscript properties:"
627	LogPrint "# ScriptName: " & Wscript.ScriptName
628	LogPrint "# Version: " & Wscript.Version
629	LogPrint "# Build: " & Wscript.BuildVersion
630	LogPrint "# Name: " & Wscript.Name
631	LogPrint "# Full Name: " & Wscript.FullName
632	LogPrint "# Path: " & Wscript.Path
633	LogPrint "#"
634
635
636	' the environment
637	LogPrint "# Environment:"
638	dim objEnv
639	for each strVar in g_objShell.Environment("PROCESS")
640	LogPrint "# " & strVar
641	next
642	LogPrint "#"
643	end sub
644
645
646	''
647	' Append text to the log file.
648	sub LogPrint(str)
649	FileAppendLine g_strLogFile, str
650	'Wscript.Echo "dbg: " & str
651	end sub
652
653
654	''
655	' Checks if the file exists and logs failures.
656	function LogFileExists(strPath, strFilename)
657	LogFileExists = FileExists(strPath & "/" & strFilename)
658	if LogFileExists = False then
659	LogPrint "Testing '" & strPath & "': " & strFilename & " not found"
660	end if
661
662	end function
663
664
665	''
666	' Finds the first file matching the pattern.
667	' If no file is found, log the failure.
668	function LogFindFile(strPath, strPattern)
669	dim str
670
671	'
672	' Yes, there are some facy database kinda interface to the filesystem
673	' however, breaking down the path and constructing a usable query is
674	' too much hassle. So, we'll do it the unix way...
675	'
676	if Shell("dir /B """ & DosSlashes(strPath) & "\" & DosSlashes(strPattern) & """", True) = 0 _
677	And InStr(1, g_strShellOutput, Chr(13)) > 1 _
678	then
679	' return the first word.
680	LogFindFile = Left(g_strShellOutput, InStr(1, g_strShellOutput, Chr(13)) - 1)
681	else
682	LogPrint "Testing '" & strPath & "': " & strPattern & " not found"
683	LogFindFile = ""
684	end if
685	end function
686
687
688	''
689	' Finds the first directory matching the pattern.
690	' If no directory is found, log the failure,
691	' else return the complete path to the found directory.
692	function LogFindDir(strPath, strPattern)
693	dim str
694
695	'
696	' Yes, there are some facy database kinda interface to the filesystem
697	' however, breaking down the path and constructing a usable query is
698	' too much hassle. So, we'll do it the unix way...
699	'
700
701	' List the alphabetically last names as first entries (with /O-N).
702	if Shell("dir /B /AD /O-N """ & DosSlashes(strPath) & "\" & DosSlashes(strPattern) & """", True) = 0 _
703	And InStr(1, g_strShellOutput, Chr(13)) > 1 _
704	then
705	' return the first word.
706	LogFindDir = strPath & "/" & Left(g_strShellOutput, InStr(1, g_strShellOutput, Chr(13)) - 1)
707	else
708	LogPrint "Testing '" & strPath & "': " & strPattern & " not found"
709	LogFindDir = ""
710	end if
711	end function
712
713
714	''
715	' Initializes the config file.
716	sub CfgInit
717	FileDelete g_strCfgFile
718	CfgPrint "# -- Makefile --"
719	CfgPrint "#"
720	CfgPrint "# Build configuration generated by " & GetCommandline()
721	CfgPrint "#"
722	if g_blnInternalMode = False then
723	CfgPrint "VBOX_OSE := 1"
724	CfgPrint "VBOX_VCC_WERR = $(NO_SUCH_VARIABLE)"
725	end if
726	end sub
727
728
729	''
730	' Prints a string to the config file.
731	sub CfgPrint(str)
732	FileAppendLine g_strCfgFile, str
733	end sub
734
735
736	''
737	' Initializes the environment batch script.
738	sub EnvInit
739	FileDelete g_strEnvFile
740	EnvPrint "@echo off"
741	EnvPrint "rem"
742	EnvPrint "rem Environment setup script generated by " & GetCommandline()
743	EnvPrint "rem"
744	end sub
745
746
747	''
748	' Prints a string to the environment batch script.
749	sub EnvPrint(str)
750	FileAppendLine g_strEnvFile, str
751	end sub
752
753
754	''
755	' No COM
756	sub DisableCOM(strReason)
757	if g_blnDisableCOM = False then
758	LogPrint "Disabled COM components: " & strReason
759	g_blnDisableCOM = True
760	g_strDisableCOM = strReason
761	CfgPrint "VBOX_WITH_MAIN="
762	CfgPrint "VBOX_WITH_QTGUI="
763	CfgPrint "VBOX_WITH_VBOXSDL="
764	CfgPrint "VBOX_WITH_DEBUGGER_GUI="
765	end if
766	end sub
767
768
769	''
770	' No UDPTunnel
771	sub DisableUDPTunnel(strReason)
772	if g_blnDisableUDPTunnel = False then
773	LogPrint "Disabled UDPTunnel network transport: " & strReason
774	g_blnDisableUDPTunnel = True
775	g_strDisableUDPTunnel = strReason
776	CfgPrint "VBOX_WITH_UDPTUNNEL="
777	end if
778	end sub
779
780
781	''
782	' No SDL
783	sub DisableSDL(strReason)
784	if g_blnDisableSDL = False then
785	LogPrint "Disabled SDL frontend: " & strReason
786	g_blnDisableSDL = True
787	g_strDisableSDL = strReason
788	CfgPrint "VBOX_WITH_VBOXSDL="
789	end if
790	end sub
791
792
793	''
794	' Checks the the path doesn't contain characters the tools cannot deal with.
795	sub CheckSourcePath
796	dim sPwd
797
798	sPwd = PathAbs(g_strPath)
799	if InStr(1, sPwd, " ") > 0 then
800	MsgError "Source path contains spaces! Please move it. (" & sPwd & ")"
801	end if
802	if InStr(1, sPwd, "$") > 0 then
803	MsgError "Source path contains the '$' char! Please move it. (" & sPwd & ")"
804	end if
805	if InStr(1, sPwd, "%") > 0 then
806	MsgError "Source path contains the '%' char! Please move it. (" & sPwd & ")"
807	end if
808	if InStr(1, sPwd, Chr(10)) > 0 _
809	Or InStr(1, sPwd, Chr(13)) > 0 _
810	Or InStr(1, sPwd, Chr(9)) > 0 _
811	then
812	MsgError "Source path contains control characters! Please move it. (" & sPwd & ")"
813	end if
814	Print "Source path: OK"
815	end sub
816
817
818	''
819	' Checks for kBuild - very simple :)
820	sub CheckForkBuild(strOptkBuild)
821	PrintHdr "kBuild"
822
823	'
824	' Check if there is a 'kmk' in the path somewhere without
825	' any KBUILD_*PATH stuff around.
826	'
827	blnNeedEnvVars = True
828	g_strPathkBuild = strOptkBuild
829	g_strPathkBuildBin = ""
830	if (g_strPathkBuild = "") _
831	And (EnvGetFirst("KBUILD_PATH", "PATH_KBUILD") = "") _
832	And (EnvGetFirst("KBUILD_BIN_PATH", "PATH_KBUILD_BIN") = "") _
833	And (Shell("kmk.exe --version", True) = 0) _
834	And (InStr(1,g_strShellOutput, "kBuild Make 0.1") > 0) _
835	And (InStr(1,g_strShellOutput, "KBUILD_PATH") > 0) _
836	And (InStr(1,g_strShellOutput, "KBUILD_BIN_PATH") > 0) then
837	'' @todo Need to parse out the KBUILD_PATH and KBUILD_BIN_PATH values to complete the other tests.
838	'blnNeedEnvVars = False
839	MsgWarning "You've installed kBuild it seems. configure.vbs hasn't been updated to " _
840	& "deal with that yet and will use the one it ships with. Sorry."
841	end if
842
843	'
844	' Check for the KBUILD_PATH env.var. and fall back on root/kBuild otherwise.
845	'
846	if g_strPathkBuild = "" then
847	g_strPathkBuild = EnvGetFirst("KBUILD_PATH", "PATH_KBUILD")
848	if (g_strPathkBuild <> "") and (FileExists(g_strPathkBuild & "/footer.kmk") = False) then
849	MsgWarning "Ignoring incorrect kBuild path (KBUILD_PATH=" & g_strPathkBuild & ")"
850	g_strPathkBuild = ""
851	end if
852
853	if g_strPathkBuild = "" then
854	g_strPathkBuild = g_strPath & "/kBuild"
855	end if
856	end if
857
858	g_strPathkBuild = UnixSlashes(PathAbs(g_strPathkBuild))
859
860	'
861	' Check for env.vars that kBuild uses (do this early to set g_strTargetArch).
862	'
863	str = EnvGetFirst("KBUILD_TYPE", "BUILD_TYPE")
864	if (str <> "") _
865	And (InStr(1, "\|release\|debug\|profile\|kprofile", str) <= 0) then
866	EnvPrint "set KBUILD_TYPE=release"
867	EnvSet "KBUILD_TYPE", "release"
868	MsgWarning "Found unknown KBUILD_TYPE value '" & str &"' in your environment. Setting it to 'release'."
869	end if
870
871	str = EnvGetFirst("KBUILD_TARGET", "BUILD_TARGET")
872	if (str <> "") _
873	And (InStr(1, "win\|win32\|win64", str) <= 0) then '' @todo later only 'win' will be valid. remember to fix this check!
874	EnvPrint "set KBUILD_TARGET=win"
875	EnvSet "KBUILD_TARGET", "win"
876	MsgWarning "Found unknown KBUILD_TARGET value '" & str &"' in your environment. Setting it to 'win32'."
877	end if
878
879	str = EnvGetFirst("KBUILD_TARGET_ARCH", "BUILD_TARGET_ARCH")
880	if (str <> "") _
881	And (InStr(1, "x86\|amd64", str) <= 0) then
882	EnvPrint "set KBUILD_TARGET_ARCH=x86"
883	EnvSet "KBUILD_TARGET_ARCH", "x86"
884	MsgWarning "Found unknown KBUILD_TARGET_ARCH value '" & str &"' in your environment. Setting it to 'x86'."
885	str = "x86"
886	end if
887	if g_strTargetArch = "" then '' command line parameter --target-arch=x86\|amd64 has priority
888	if str <> "" then
889	g_strTargetArch = str
890	elseif (EnvGet("PROCESSOR_ARCHITEW6432") = "AMD64" ) _
891	Or (EnvGet("PROCESSOR_ARCHITECTURE") = "AMD64" ) then
892	g_strTargetArch = "amd64"
893	else
894	g_strTargetArch = "x86"
895	end if
896	else
897	if InStr(1, "x86\|amd64", g_strTargetArch) <= 0 then
898	EnvPrint "set KBUILD_TARGET_ARCH=x86"
899	EnvSet "KBUILD_TARGET_ARCH", "x86"
900	MsgWarning "Unknown --target-arch=" & str &". Setting it to 'x86'."
901	end if
902	end if
903	LogPrint " Target architecture: " & g_strTargetArch & "."
904	Wscript.Echo " Target architecture: " & g_strTargetArch & "."
905	EnvPrint "set KBUILD_TARGET_ARCH=" & g_strTargetArch
906
907	str = EnvGetFirst("KBUILD_TARGET_CPU", "BUILD_TARGET_CPU")
908	' perhaps a bit pedantic this since this isn't clearly define nor used much...
909	if (str <> "") _
910	And (InStr(1, "i386\|i486\|i686\|i786\|i868\|k5\|k6\|k7\|k8", str) <= 0) then
911	EnvPrint "set BUILD_TARGET_CPU=i386"
912	EnvSet "KBUILD_TARGET_CPU", "i386"
913	MsgWarning "Found unknown KBUILD_TARGET_CPU value '" & str &"' in your environment. Setting it to 'i386'."
914	end if
915
916	str = EnvGetFirst("KBUILD_HOST", "BUILD_PLATFORM")
917	if (str <> "") _
918	And (InStr(1, "win\|win32\|win64", str) <= 0) then '' @todo later only 'win' will be valid. remember to fix this check!
919	EnvPrint "set KBUILD_HOST=win"
920	EnvSet "KBUILD_HOST", "win"
921	MsgWarning "Found unknown KBUILD_HOST value '" & str &"' in your environment. Setting it to 'win32'."
922	end if
923
924	str = EnvGetFirst("KBUILD_HOST_ARCH", "BUILD_PLATFORM_ARCH")
925	if str <> "" then
926	if InStr(1, "x86\|amd64", str) <= 0 then
927	str = "x86"
928	MsgWarning "Found unknown KBUILD_HOST_ARCH value '" & str &"' in your environment. Setting it to 'x86'."
929	end if
930	elseif (EnvGet("PROCESSOR_ARCHITEW6432") = "AMD64" ) _
931	Or (EnvGet("PROCESSOR_ARCHITECTURE") = "AMD64" ) then
932	str = "amd64"
933	else
934	str = "x86"
935	end if
936	LogPrint " Host architecture: " & str & "."
937	Wscript.Echo " Host architecture: " & str & "."
938	EnvPrint "set KBUILD_HOST_ARCH=" & str
939	g_strHostArch = str
940
941	str = EnvGetFirst("KBUILD_HOST_CPU", "BUILD_PLATFORM_CPU")
942	' perhaps a bit pedantic this since this isn't clearly define nor used much...
943	if (str <> "") _
944	And (InStr(1, "i386\|i486\|i686\|i786\|i868\|k5\|k6\|k7\|k8", str) <= 0) then
945	EnvPrint "set KBUILD_HOST_CPU=i386"
946	EnvSet "KBUILD_HOST_CPU", "i386"
947	MsgWarning "Found unknown KBUILD_HOST_CPU value '" & str &"' in your environment. Setting it to 'i386'."
948	end if
949
950	'
951	' Determin the location of the kBuild binaries.
952	'
953	if g_strPathkBuildBin = "" then
954	g_strPathkBuildBin = g_strPathkBuild & "/bin/win." & g_strHostArch
955	if FileExists(g_strPathkBuildBin & "/kmk.exe") = False then
956	g_strPathkBuildBin = g_strPathkBuild & "/bin/win.x86"
957	end if
958	end if
959
960	'
961	' Perform basic validations of the kBuild installation.
962	'
963	if (FileExists(g_strPathkBuild & "/footer.kmk") = False) _
964	Or (FileExists(g_strPathkBuild & "/header.kmk") = False) _
965	Or (FileExists(g_strPathkBuild & "/rules.kmk") = False) then
966	MsgFatal "Can't find valid kBuild at '" & g_strPathkBuild & "'. Either there is an " _
967	& "incorrect KBUILD_PATH in the environment or the checkout didn't succeed."
968	exit sub
969	end if
970	if (FileExists(g_strPathkBuildBin & "/kmk.exe") = False) _
971	Or (FileExists(g_strPathkBuildBin & "/kmk_ash.exe") = False) then
972	MsgFatal "Can't find valid kBuild binaries at '" & g_strPathkBuildBin & "'. Either there is an " _
973	& "incorrect KBUILD_PATH in the environment or the checkout didn't succeed."
974	exit sub
975	end if
976
977	if (Shell(DosSlashes(g_strPathkBuildBin & "/kmk.exe") & " --version", True) <> 0) Then
978	MsgFatal "Can't execute '" & g_strPathkBuildBin & "/kmk.exe --version'. check configure.log for the out."
979	exit sub
980	end if
981
982	'
983	' If PATH_DEV is set, check that it's pointing to something useful.
984	'
985	str = EnvGet("PATH_DEV")
986	g_strPathDev = str
987	if (str <> "") _
988	And False then '' @todo add some proper tests here.
989	strNew = UnixSlashes(g_strPath & "/tools")
990	EnvPrint "set PATH_DEV=" & strNew
991	EnvSet "PATH_DEV", strNew
992	MsgWarning "Found PATH_DEV='" & str &"' in your environment. Setting it to '" & strNew & "'."
993	g_strPathDev = strNew
994	end if
995	if g_strPathDev = "" then g_strPathDev = UnixSlashes(g_strPath & "/tools")
996
997	'
998	' Write KBUILD_PATH to the environment script if necessary.
999	'
1000	if blnNeedEnvVars = True then
1001	EnvPrint "set KBUILD_PATH=" & g_strPathkBuild
1002	EnvSet "KBUILD_PATH", g_strPathkBuild
1003	EnvPrint "set PATH=" & g_strPathkBuildBin & ";%PATH%"
1004	EnvPrepend "PATH", g_strPathkBuildBin & ";"
1005	end if
1006
1007	PrintResult "kBuild", g_strPathkBuild
1008	PrintResult "kBuild binaries", g_strPathkBuildBin
1009	end sub
1010
1011
1012	''
1013	' Checks for Visual C++ version 10 (2010).
1014	sub CheckForVisualCPP(strOptVC, strOptVCCommon, blnOptVCExpressEdition)
1015	dim strPathVC, strPathVCCommon, str, str2, blnNeedMsPDB
1016	PrintHdr "Visual C++"
1017
1018	'
1019	' Try find it...
1020	'
1021	strPathVC = ""
1022	strPathVCCommon = ""
1023	if (strPathVC = "") And (strOptVC <> "") then
1024	if CheckForVisualCPPSub(strOptVC, strOptVCCommon, blnOptVCExpressEdition) then
1025	strPathVC = strOptVC
1026	strPathVCCommon = strOptVCCommon
1027	end if
1028	end if
1029
1030	if (strPathVC = "") And (g_blnInternalFirst = True) Then
1031	strPathVC = g_strPathDev & "/win.x86/vcc/v10sp1"
1032	if CheckForVisualCPPSub(strPathVC, "", blnOptVCExpressEdition) = False then
1033	strPathVC = ""
1034	end if
1035	end if
1036
1037	if (strPathVC = "") _
1038	And (Shell("cl.exe", True) = 0) then
1039	str = Which("cl.exe")
1040	if FileExists(PathStripFilename(strClExe) & "/build.exe") then
1041	' don't know how to deal with this cl.
1042	Warning "Ignoring DDK cl.exe (" & str & ")."
1043	else
1044	strPathVC = PathParent(PathStripFilename(str))
1045	strPathVCCommon = PathParent(strPathVC) & "/Common7"
1046	end if
1047	end if
1048
1049	if (strPathVC = "") then
1050	str = RegGetString("HKLM\SOFTWARE\Wow6432Node\Microsoft\VisualStudio\10.0\Setup\VS\ProductDir")
1051	if str <> "" Then
1052	str2 = str & "Common7"
1053	str = str & "VC"
1054	if CheckForVisualCPPSub(str, str2, blnOptVCExpressEdition) then
1055	strPathVC = str
1056	strPathVCCommon = str2
1057	end if
1058	end if
1059	end if
1060
1061	if (strPathVC = "") then
1062	str = RegGetString("HKLM\SOFTWARE\Microsoft\VisualStudio\10.0\Setup\VS\ProductDir")
1063	if str <> "" Then
1064	str2 = str & "Common7"
1065	str = str & "VC"
1066	if CheckForVisualCPPSub(str, str2, blnOptVCExpressEdition) then
1067	strPathVC = str
1068	strPathVCCommon = str2
1069	end if
1070	end if
1071	end if
1072
1073	if (strPathVC = "") And (g_blnInternalFirst = False) Then
1074	strPathVC = g_strPathDev & "/win.x86/vcc/v10sp1"
1075	if CheckForVisualCPPSub(strPathVC, "", blnOptVCExpressEdition) = False then
1076	strPathVC = ""
1077	end if
1078	end if
1079
1080	if strPathVC = "" then
1081	MsgError "Cannot find cl.exe (Visual C++) anywhere on your system. Check the build requirements."
1082	exit sub
1083	end if
1084
1085	'
1086	' Clean up the path and determin the VC directory.
1087	'
1088	strPathVC = UnixSlashes(PathAbs(strPathVC))
1089	g_strPathVCC = strPathVC
1090
1091	'
1092	' Check the version.
1093	' We'll have to make sure mspdbXX.dll is somewhere in the PATH.
1094	'
1095	if (strPathVCCommon <> "") Then
1096	EnvAppend "PATH", ";" & strPathVCCommon & "/IDE"
1097	end if
1098	if Shell(DosSlashes(strPathVC & "/bin/cl.exe"), True) <> 0 then
1099	MsgError "Executing '" & strClExe & "' (which we believe to be the Visual C++ compiler driver) failed."
1100	exit sub
1101	end if
1102
1103	if (InStr(1, g_strShellOutput, "Version 16.") <= 0) _
1104	And (InStr(1, g_strShellOutput, "Version 17.") <= 0) then
1105	MsgError "The Visual C++ compiler we found ('" & strPathVC & "') isn't 10.0 or 11.0. Check the build requirements."
1106	exit sub
1107	end if
1108
1109	'
1110	' Ok, emit build config variables.
1111	'
1112	if InStr(1, g_strShellOutput, "Version 16.") > 0 then
1113	CfgPrint "PATH_TOOL_VCC100 := " & g_strPathVCC
1114	CfgPrint "PATH_TOOL_VCC100X86 := $(PATH_TOOL_VCC100)"
1115	CfgPrint "PATH_TOOL_VCC100AMD64 := $(PATH_TOOL_VCC100)"
1116	if LogFileExists(strPathVC, "atlmfc/include/atlbase.h") then
1117	PrintResult "Visual C++ v10 with ATL", g_strPathVCC
1118	elseif LogFileExists(g_strPathDDK, "inc/atl71/atlbase.h") _
1119	And LogFileExists(g_strPathDDK, "lib/ATL/i386/atls.lib") then
1120	CfgPrint "VBOX_WITHOUT_COMPILER_REDIST=1"
1121	CfgPrint "PATH_TOOL_VCC100_ATLMFC_INC = " & g_strPathDDK & "/inc/atl71"
1122	CfgPrint "PATH_TOOL_VCC100_ATLMFC_LIB.amd64 = " & g_strPathDDK & "/lib/ATL/amd64"
1123	CfgPrint "PATH_TOOL_VCC100_ATLMFC_LIB.x86 = " & g_strPathDDK & "/lib/ATL/i386"
1124	CfgPrint "PATH_TOOL_VCC100AMD64_ATLMFC_INC = " & g_strPathDDK & "/inc/atl71"
1125	CfgPrint "PATH_TOOL_VCC100AMD64_ATLMFC_LIB = " & g_strPathDDK & "/lib/ATL/amd64"
1126	CfgPrint "PATH_TOOL_VCC100X86_ATLMFC_INC = " & g_strPathDDK & "/inc/atl71"
1127	CfgPrint "PATH_TOOL_VCC100X86_ATLMFC_LIB = " & g_strPathDDK & "/lib/ATL/i386"
1128	PrintResult "Visual C++ v10 with DDK ATL", g_strPathVCC
1129	else
1130	CfgPrint "VBOX_WITHOUT_COMPILER_REDIST=1"
1131	DisableCOM "No ATL"
1132	PrintResult "Visual C++ v10 (or later) without ATL", g_strPathVCC
1133	end if
1134
1135	elseif InStr(1, g_strShellOutput, "Version 17.") > 0 then
1136	CfgPrint "PATH_TOOL_VCC110 := " & g_strPathVCC
1137	CfgPrint "PATH_TOOL_VCC110X86 := $(PATH_TOOL_VCC110)"
1138	CfgPrint "PATH_TOOL_VCC110AMD64 := $(PATH_TOOL_VCC110)"
1139	PrintResult "Visual C++ v11", g_strPathVCC
1140	MsgWarning "The support for Visual C++ v11 (aka 2012) is experimental"
1141
1142	else
1143	MsgError "The Visual C++ compiler we found ('" & strPathVC & "') isn't 10.0 or 11.0. Check the build requirements."
1144	exit sub
1145	end if
1146
1147	' and the env.bat path fix.
1148	if strPathVCCommon <> "" then
1149	EnvPrint "set PATH=%PATH%;" & strPathVCCommon & "/IDE;"
1150	end if
1151	end sub
1152
1153	''
1154	' Checks if the specified path points to a usable PSDK.
1155	function CheckForVisualCPPSub(strPathVC, strPathVCCommon, blnOptVCExpressEdition)
1156	strPathVC = UnixSlashes(PathAbs(strPathVC))
1157	CheckForVisualCPPSub = False
1158	LogPrint "trying: strPathVC=" & strPathVC & " strPathVCCommon=" & strPathVCCommon & " blnOptVCExpressEdition=" & blnOptVCExpressEdition
1159	if LogFileExists(strPathVC, "bin/cl.exe") _
1160	And LogFileExists(strPathVC, "bin/link.exe") _
1161	And LogFileExists(strPathVC, "include/string.h") _
1162	And LogFileExists(strPathVC, "lib/libcmt.lib") _
1163	And LogFileExists(strPathVC, "lib/msvcrt.lib") _
1164	then
1165	if blnOptVCExpressEdition _
1166	Or ( LogFileExists(strPathVC, "atlmfc/include/atlbase.h") _
1167	And LogFileExists(strPathVC, "atlmfc/lib/atls.lib")) _
1168	Or ( LogFileExists(g_strPathDDK, "inc/atl71/atlbase.h") _
1169	And LogFileExists(g_strPathDDK, "lib/ATL/i386/atls.lib")) _
1170	Then
1171	'' @todo figure out a way we can verify the version/build!
1172	CheckForVisualCPPSub = True
1173	end if
1174	end if
1175	end function
1176
1177
1178	''
1179	' Checks for a platform SDK that works with the compiler
1180	sub CheckForPlatformSDK(strOptSDK)
1181	dim strPathPSDK, str
1182	PrintHdr "Windows Platform SDK (recent)"
1183
1184	strPathPSDK = ""
1185
1186	' Check the supplied argument first.
1187	str = strOptSDK
1188	if str <> "" then
1189	if CheckForPlatformSDKSub(str) then strPathPSDK = str
1190	end if
1191
1192	' The tools location (first).
1193	if strPathPSDK = "" And g_blnInternalFirst then
1194	str = g_strPathDev & "/win.x86/sdk/v7.1"
1195	if CheckForPlatformSDKSub(str) then strPathPSDK = str
1196	end if
1197
1198	if strPathPSDK = "" And g_blnInternalFirst then
1199	str = g_strPathDev & "/win.x86/sdk/v8.0"
1200	if CheckForPlatformSDKSub(str) then strPathPSDK = str
1201	end if
1202
1203	' Look for it in the environment
1204	str = EnvGet("MSSdk")
1205	if strPathPSDK = "" And str <> "" then
1206	if CheckForPlatformSDKSub(str) then strPathPSDK = str
1207	end if
1208
1209	str = EnvGet("Mstools")
1210	if strPathPSDK = "" And str <> "" then
1211	if CheckForPlatformSDKSub(str) then strPathPSDK = str
1212	end if
1213
1214	' Check if there is one installed with the compiler.
1215	if strPathPSDK = "" And str <> "" then
1216	str = g_strPathVCC & "/PlatformSDK"
1217	if CheckForPlatformSDKSub(str) then strPathPSDK = str
1218	end if
1219
1220	' Check the registry next (ASSUMES sorting).
1221	arrSubKeys = RegEnumSubKeysRSort("HKLM", "SOFTWARE\Microsoft\Microsoft SDKs\Windows")
1222	for each strSubKey in arrSubKeys
1223	str = RegGetString("HKLM\SOFTWARE\Microsoft\Microsoft SDKs\Windows\" & strSubKey & "\InstallationFolder")
1224	if strPathPSDK = "" And str <> "" then
1225	if CheckForPlatformSDKSub(str) then strPathPSDK = str
1226	end if
1227	Next
1228	arrSubKeys = RegEnumSubKeysRSort("HKCU", "SOFTWARE\Microsoft\Microsoft SDKs\Windows")
1229	for each strSubKey in arrSubKeys
1230	str = RegGetString("HKCU\SOFTWARE\Microsoft\Microsoft SDKs\Windows\" & strSubKey & "\InstallationFolder")
1231	if strPathPSDK = "" And str <> "" then
1232	if CheckForPlatformSDKSub(str) then strPathPSDK = str
1233	end if
1234	Next
1235
1236	' The tools location (post).
1237	if (strPathPSDK = "") And (g_blnInternalFirst = False) then
1238	str = g_strPathDev & "/win.x86/sdk/v7.1"
1239	if CheckForPlatformSDKSub(str) then strPathPSDK = str
1240	end if
1241
1242	if (strPathPSDK = "") And (g_blnInternalFirst = False) then
1243	str = g_strPathDev & "/win.x86/sdk/v8.0"
1244	if CheckForPlatformSDKSub(str) then strPathPSDK = str
1245	end if
1246
1247	' Give up.
1248	if strPathPSDK = "" then
1249	MsgError "Cannot find a suitable Platform SDK. Check configure.log and the build requirements."
1250	exit sub
1251	end if
1252
1253	'
1254	' Emit the config.
1255	'
1256	strPathPSDK = UnixSlashes(PathAbs(strPathPSDK))
1257	CfgPrint "PATH_SDK_WINPSDK" & g_strVerPSDK & " := " & strPathPSDK
1258	CfgPrint "VBOX_WINPSDK := WINPSDK" & g_strVerPSDK
1259
1260	PrintResult "Windows Platform SDK (v" & g_strVerPSDK & ")", strPathPSDK
1261	g_strPathPSDK = strPathPSDK
1262	end sub
1263
1264	''
1265	' Checks if the specified path points to a usable PSDK.
1266	function CheckForPlatformSDKSub(strPathPSDK)
1267	CheckForPlatformSDKSub = False
1268	LogPrint "trying: strPathPSDK=" & strPathPSDK
1269	if LogFileExists(strPathPSDK, "include/Windows.h") _
1270	And LogFileExists(strPathPSDK, "lib/Kernel32.Lib") _
1271	And LogFileExists(strPathPSDK, "lib/User32.Lib") _
1272	And LogFileExists(strPathPSDK, "bin/rc.exe") _
1273	And Shell("""" & DosSlashes(strPathPSDK & "/bin/rc.exe") & """" , True) <> 0 _
1274	then
1275	if InStr(1, g_strShellOutput, "Resource Compiler Version 6.2.") > 0 then
1276	g_strVerPSDK = "80"
1277	CheckForPlatformSDKSub = True
1278	elseif InStr(1, g_strShellOutput, "Resource Compiler Version 6.1.") > 0 then
1279	g_strVerPSDK = "71"
1280	CheckForPlatformSDKSub = True
1281	end if
1282	end if
1283	end function
1284
1285
1286	''
1287	' Checks for a Windows 7 Driver Kit.
1288	sub CheckForWinDDK(strOptDDK)
1289	dim strPathDDK, str, strSubKeys
1290	PrintHdr "Windows DDK v7.1"
1291
1292	'
1293	' Find the DDK.
1294	'
1295	strPathDDK = ""
1296	' The specified path.
1297	if strPathDDK = "" And strOptDDK <> "" then
1298	if CheckForWinDDKSub(strOptDDK, True) then strPathDDK = strOptDDK
1299	end if
1300
1301	' The tools location (first).
1302	if strPathDDK = "" And g_blnInternalFirst then
1303	str = g_strPathDev & "/win.x86/ddk/7600.16385.1"
1304	if CheckForWinDDKSub(str, False) then strPathDDK = str
1305	end if
1306
1307	' Check the environment
1308	str = EnvGet("DDK_INC_PATH")
1309	if strPathDDK = "" And str <> "" then
1310	str = PathParent(PathParent(str))
1311	if CheckForWinDDKSub(str, True) then strPathDDK = str
1312	end if
1313
1314	str = EnvGet("BASEDIR")
1315	if strPathDDK = "" And str <> "" then
1316	if CheckForWinDDKSub(str, True) then strPathDDK = str
1317	end if
1318
1319	' Some array constants to ease the work.
1320	arrSoftwareKeys = array("SOFTWARE", "SOFTWARE\Wow6432Node")
1321	arrRoots = array("HKLM", "HKCU")
1322
1323	' Windows 7 WDK.
1324	arrLocations = array()
1325	for each strSoftwareKey in arrSoftwareKeys
1326	for each strSubKey in RegEnumSubKeysFull("HKLM", strSoftwareKey & "\Microsoft\KitSetup\configured-kits")
1327	for each strSubKey2 in RegEnumSubKeysFull("HKLM", strSubKey)
1328	str = RegGetString("HKLM\" & strSubKey2 & "\setup-install-location")
1329	if str <> "" then
1330	arrLocations = ArrayAppend(arrLocations, PathAbsLong(str))
1331	end if
1332	next
1333	next
1334	next
1335	arrLocations = ArrayRSortStrings(arrLocations)
1336
1337	' Check the locations we've gathered.
1338	for each str in arrLocations
1339	if strPathDDK = "" then
1340	if CheckForWinDDKSub(str, True) then strPathDDK = str
1341	end if
1342	next
1343
1344	' The tools location (post).
1345	if (strPathDDK = "") And (g_blnInternalFirst = False) then
1346	str = g_strPathDev & "/win.x86/ddk/7600.16385.1"
1347	if CheckForWinDDKSub(str, False) then strPathDDK = str
1348	end if
1349
1350	' Give up.
1351	if strPathDDK = "" then
1352	MsgError "Cannot find the Windows DDK v7.1. Check configure.log and the build requirements."
1353	exit sub
1354	end if
1355
1356	'
1357	' Emit the config.
1358	'
1359	strPathDDK = UnixSlashes(PathAbs(strPathDDK))
1360	CfgPrint "PATH_SDK_WINDDK71 := " & strPathDDK
1361
1362	PrintResult "Windows DDK v7.1", strPathDDK
1363	g_strPathDDK = strPathDDK
1364	end sub
1365
1366	'' Quick check if the DDK is in the specified directory or not.
1367	function CheckForWinDDKSub(strPathDDK, blnCheckBuild)
1368	CheckForWinDDKSub = False
1369	LogPrint "trying: strPathDDK=" & strPathDDK & " blnCheckBuild=" & blnCheckBuild
1370	if LogFileExists(strPathDDK, "inc/api/ntdef.h") _
1371	And LogFileExists(strPathDDK, "lib/win7/i386/int64.lib") _
1372	And LogFileExists(strPathDDK, "lib/wlh/i386/int64.lib") _
1373	And LogFileExists(strPathDDK, "lib/wnet/i386/int64.lib") _
1374	And LogFileExists(strPathDDK, "lib/wxp/i386/int64.lib") _
1375	And Not LogFileExists(strPathDDK, "lib/win8/i386/int64.lib") _
1376	And LogFileExists(strPathDDK, "bin/x86/rc.exe") _
1377	then
1378	if Not blnCheckBuild then
1379	CheckForWinDDKSub = True
1380	'' @todo Find better build check.
1381	elseif Shell("""" & DosSlashes(strPathDDK & "/bin/x86/rc.exe") & """" , True) <> 0 _
1382	And InStr(1, g_strShellOutput, "Resource Compiler Version 6.1.") > 0 then
1383	CheckForWinDDKSub = True
1384	end if
1385	end if
1386	end function
1387
1388
1389	''
1390	' Finds midl.exe
1391	sub CheckForMidl()
1392	dim strMidl
1393	PrintHdr "Midl.exe"
1394
1395	' Skip if no COM/ATL.
1396	if g_blnDisableCOM then
1397	PrintResultMsg "Midl", "Skipped (" & g_strDisableCOM & ")"
1398	exit sub
1399	end if
1400
1401	if LogFileExists(g_strPathPSDK, "bin/Midl.exe") then
1402	strMidl = g_strPathPSDK & "/bin/Midl.exe"
1403	elseif LogFileExists(g_strPathVCC, "Common7/Tools/Bin/Midl.exe") then
1404	strMidl = g_strPathVCC & "/Common7/Tools/Bin/Midl.exe"
1405	elseif LogFileExists(g_strPathDDK, "bin/x86/Midl.exe") then
1406	strMidl = g_strPathDDK & "/bin/x86/Midl.exe"
1407	elseif LogFileExists(g_strPathDDK, "bin/Midl.exe") then
1408	strMidl = g_strPathDDK & "/bin/Midl.exe"
1409	elseif LogFileExists(g_strPathDev, "win.x86/bin/Midl.exe") then
1410	strMidl = g_strPathDev & "/win.x86/bin/Midl.exe"
1411	else
1412	MsgWarning "Midl.exe not found!"
1413	exit sub
1414	end if
1415
1416	CfgPrint "VBOX_MAIN_IDL := " & strMidl
1417	PrintResult "Midl.exe", strMidl
1418	end sub
1419
1420
1421	''
1422	' Checks for a MinGW32 suitable for building the recompiler.
1423	'
1424	' strOptW32API is currently ignored.
1425	'
1426	sub CheckForMinGW32(strOptMinGW32, strOptW32API)
1427	dim strPathMingW32, strPathW32API, str
1428	PrintHdr "MinGW32 GCC v3.3.x + Binutils + Runtime + W32API"
1429
1430	'
1431	' Find the MinGW and W32API tools.
1432	'
1433	strPathMingW32 = ""
1434	strPathW32API = ""
1435
1436	' The specified path.
1437	if (strPathMingW32 = "") And (strOptMinGW32 <> "") then
1438	if CheckForMinGW32Sub(strOptMinGW32, strOptW32API) then
1439	strPathMingW32 = strOptMinGW32
1440	strPathW32API = strOptW32API
1441	end if
1442	end if
1443
1444	' The tools location (first).
1445	if (strPathMingW32 = "") And (g_blnInternalFirst = True) then
1446	str = g_strPathDev & "/win.x86/mingw32/v3.3.3"
1447	str2 = g_strPathDev & "/win.x86/w32api/v2.5"
1448	if CheckForMinGW32Sub(str, str2) then
1449	strPathMingW32 = str
1450	strPathW32API = str2
1451	end if
1452	end if
1453
1454	' See if there is any gcc around.
1455	if strPathMingW32 = "" then
1456	str = Which("mingw32-gcc.exe")
1457	if (str <> "") then
1458	str = PathParent(PathStripFilename(str))
1459	if CheckForMinGW32Sub(str, str) then strPathMingW32 = str
1460	end if
1461	end if
1462
1463	if strPathMingW32 = "" then
1464	str = Which("gcc.exe")
1465	if (str <> "") then
1466	str = PathParent(PathStripFilename(str))
1467	if CheckForMinGW32Sub(str, str) then strPathMingW32 = str
1468	end if
1469	end if
1470
1471	' The tools location (post).
1472	if (strPathMingW32 = "") And (g_blnInternalFirst = False) then
1473	str = g_strPathDev & "/win.x86/mingw32/v3.3.3"
1474	str2 = g_strPathDev & "/win.x86/w32api/v2.5"
1475	if CheckForMinGW32Sub(str, str2) then
1476	strPathMingW32 = str
1477	strPathW32API = str2
1478	end if
1479	end if
1480
1481	' Success?
1482	if strPathMingW32 = "" then
1483	if g_strTargetArch = "amd64" then
1484	MsgWarning "Can't locate a suitable MinGW32 installation, ignoring since we're targeting AMD64 and won't need it."
1485	elseif strOptMinGW32 = "" then
1486	MsgError "Can't locate a suitable MinGW32 installation. Try specify the path with " _
1487	& "the --with-MinGW32=<path> argument. If still no luck, consult the configure.log and the build requirements."
1488	else
1489	MsgError "Can't locate a suitable MinGW32 installation. Please consult the configure.log and the build requirements."
1490	end if
1491	exit sub
1492	end if
1493
1494	'
1495	' Emit the config.
1496	'
1497	strPathMingW32 = UnixSlashes(PathAbs(strPathMingW32))
1498	CfgPrint "PATH_TOOL_MINGW32 := " & strPathMingW32
1499	PrintResult "MinGW32 (GCC v" & g_strSubOutput & ")", strPathMingW32
1500	if (strPathMingW32 = strPathW32API) Or strPathW32API = "" then
1501	CfgPrint "PATH_SDK_W32API := $(PATH_TOOL_MINGW32)"
1502	else
1503	CfgPrint "PATH_SDK_W32API := " & strPathW32API
1504	PrintResult "W32API", strPathW32API
1505	end if
1506	end sub
1507
1508	''
1509	' Checks if the specified path points to an usable MinGW or not.
1510	function CheckForMinGW32Sub(strPathMingW32, strPathW32API)
1511	g_strSubOutput = ""
1512	if strPathW32API = "" then strPathW32API = strPathMingW32
1513	LogPrint "trying: strPathMingW32=" &strPathMingW32 & " strPathW32API=" & strPathW32API
1514
1515	if LogFileExists(strPathMingW32, "bin/mingw32-gcc.exe") _
1516	And LogFileExists(strPathMingW32, "bin/ld.exe") _
1517	And LogFileExists(strPathMingW32, "bin/objdump.exe") _
1518	And LogFileExists(strPathMingW32, "bin/dllwrap.exe") _
1519	And LogFileExists(strPathMingW32, "bin/as.exe") _
1520	And LogFileExists(strPathMingW32, "include/string.h") _
1521	And LogFileExists(strPathMingW32, "include/_mingw.h") _
1522	And LogFileExists(strPathMingW32, "lib/dllcrt1.o") _
1523	And LogFileExists(strPathMingW32, "lib/dllcrt2.o") _
1524	And LogFileExists(strPathMingW32, "lib/libmsvcrt.a") _
1525	_
1526	And LogFileExists(strPathW32API, "lib/libkernel32.a") _
1527	And LogFileExists(strPathW32API, "include/windows.h") _
1528	then
1529	if Shell(DosSlashes(strPathMingW32 & "/bin/gcc.exe") & " --version", True) = 0 then
1530	dim offVer, iMajor, iMinor, iPatch, strVer
1531
1532	' extract the version.
1533	strVer = ""
1534	offVer = InStr(1, g_strShellOutput, "(GCC) ")
1535	if offVer > 0 then
1536	strVer = LTrim(Mid(g_strShellOutput, offVer + Len("(GCC) ")))
1537	strVer = RTrim(Left(strVer, InStr(1, strVer, " ")))
1538	if (Mid(strVer, 2, 1) = ".") _
1539	And (Mid(strVer, 4, 1) = ".") then
1540	iMajor = Int(Left(strVer, 1)) ' Is Int() the right thing here? I want atoi()!!!
1541	iMinor = Int(Mid(strVer, 3, 1))
1542	iPatch = Int(Mid(strVer, 5))
1543	else
1544	LogPrint "Malformed version: '" & strVer & "'"
1545	strVer = ""
1546	end if
1547	end if
1548	if strVer <> "" then
1549	if (iMajor = 3) And (iMinor = 3) then
1550	CheckForMinGW32Sub = True
1551	g_strSubOutput = strVer
1552	else
1553	LogPrint "MinGW32 version '" & iMajor & "." & iMinor & "." & iPatch & "' is not supported (or configure.vbs failed to parse it correctly)."
1554	end if
1555	else
1556	LogPrint "Couldn't locate the GCC version in the output!"
1557	end if
1558
1559	else
1560	LogPrint "Failed to run gcc.exe!"
1561	end if
1562	end if
1563	end function
1564
1565
1566	''
1567	' Checks for a MinGW-w64 suitable for building the recompiler.
1568	sub CheckForMinGWw64(strOptMinGWw64)
1569	dim strPathMingWw64, str
1570	PrintHdr "MinGW-w64 GCC (unprefixed)"
1571
1572	'
1573	' Find the MinGW-w64 tools.
1574	'
1575	strPathMingWw64 = ""
1576
1577	' The specified path.
1578	if (strPathMingWw64 = "") And (strOptMinGWw64 <> "") then
1579	if CheckForMinGWw64Sub(strOptMinGWw64) then
1580	strPathMingWw64 = strOptMinGWw64
1581	end if
1582	end if
1583
1584	' The tools location (first).
1585	if (strPathMinGWw64 = "") And (g_blnInternalFirst = True) then
1586	str = g_strPathDev & "/win.amd64/mingw-w64/r1"
1587	if CheckForMinGWw64Sub(str) then
1588	strPathMinGWw64 = str
1589	end if
1590	end if
1591
1592	' See if there is any gcc around.
1593	if strPathMinGWw64 = "" then
1594	str = Which("x86_64-w64-mingw32-gcc.exe")
1595	if (str <> "") then
1596	str = PathParent(PathStripFilename(str))
1597	if CheckForMinGWw64Sub(str) then strPathMinGWw64 = str
1598	end if
1599	end if
1600
1601	if strPathMinGWw64 = "" then
1602	str = Which("gcc.exe")
1603	if (str <> "") then
1604	str = PathParent(PathStripFilename(str))
1605	if CheckForMinGWw64Sub(str) then strPathMinGWw64 = str
1606	end if
1607	end if
1608
1609	' The tools location (post).
1610	if (strPathMinGWw64 = "") And (g_blnInternalFirst = False) then
1611	str = g_strPathDev & "/win.amd64/mingw-w64/r1"
1612	if CheckForMinGWw64Sub(str) then
1613	strPathMinGWw64 = str
1614	end if
1615	end if
1616
1617	' Success?
1618	if strPathMinGWw64 = "" then
1619	if g_strTargetArch = "x86" then
1620	MsgWarning "Can't locate a suitable MinGW-w64 installation, ignoring since we're targeting x86 and won't need it."
1621	elseif strOptMinGWw64 = "" then
1622	MsgError "Can't locate a suitable MinGW-w64 installation. Try specify the path with " _
1623	& "the --with-MinGW-w64=<path> argument. If still no luck, consult the configure.log and the build requirements."
1624	else
1625	MsgError "Can't locate a suitable MinGW-w64 installation. Please consult the configure.log and the build requirements."
1626	end if
1627	exit sub
1628	end if
1629
1630	'
1631	' Emit the config.
1632	'
1633	strPathMinGWw64 = UnixSlashes(PathAbs(strPathMinGWw64))
1634	CfgPrint "PATH_TOOL_MINGWW64 := " & strPathMinGWw64
1635	PrintResult "MinGW-w64 (GCC v" & g_strSubOutput & ")", strPathMinGWw64
1636	end sub
1637
1638	''
1639	' Checks if the specified path points to an usable MinGW-w64 or not.
1640	function CheckForMinGWw64Sub(strPathMinGWw64)
1641	g_strSubOutput = ""
1642	LogPrint "trying: strPathMinGWw64=" &strPathMinGWw64
1643
1644	if LogFileExists(strPathMinGWw64, "bin/gcc.exe") _
1645	And LogFileExists(strPathMinGWw64, "bin/ld.exe") _
1646	And LogFileExists(strPathMinGWw64, "bin/objdump.exe") _
1647	And LogFileExists(strPathMinGWw64, "bin/dllwrap.exe") _
1648	And LogFileExists(strPathMinGWw64, "bin/dlltool.exe") _
1649	And LogFileExists(strPathMinGWw64, "bin/as.exe") _
1650	And LogFileExists(strPathMinGWw64, "include/bfd.h") _
1651	And LogFileExists(strPathMinGWw64, "lib64/libgcc_s.a") _
1652	And LogFileExists(strPathMinGWw64, "x86_64-w64-mingw32/lib/dllcrt1.o") _
1653	And LogFileExists(strPathMinGWw64, "x86_64-w64-mingw32/lib/dllcrt2.o") _
1654	And LogFileExists(strPathMinGWw64, "x86_64-w64-mingw32/lib/libmsvcrt.a") _
1655	And LogFileExists(strPathMinGWw64, "x86_64-w64-mingw32/lib/libmsvcr100.a") _
1656	And LogFileExists(strPathMinGWw64, "x86_64-w64-mingw32/include/_mingw.h") _
1657	And LogFileExists(strPathMinGWw64, "x86_64-w64-mingw32/include/stdint.h") _
1658	And LogFileExists(strPathMinGWw64, "x86_64-w64-mingw32/include/windows.h") _
1659	then
1660	if Shell(DosSlashes(strPathMinGWw64 & "/bin/gcc.exe") & " -dumpversion", True) = 0 then
1661	dim offVer, iMajor, iMinor, iPatch, strVer
1662
1663	' extract the version.
1664	strVer = Trim(Replace(Replace(g_strShellOutput, vbCr, ""), vbLf, ""))
1665	if (Mid(strVer, 2, 1) = ".") _
1666	And (Mid(strVer, 4, 1) = ".") then
1667	iMajor = Int(Left(strVer, 1)) ' Is Int() the right thing here? I want atoi()!!!
1668	iMinor = Int(Mid(strVer, 3, 1))
1669	iPatch = Int(Mid(strVer, 5))
1670	else
1671	LogPrint "Malformed version: '" & strVer & "'"
1672	strVer = ""
1673	end if
1674	if strVer <> "" then
1675	if (iMajor = 4) And (iMinor >= 4) then
1676	CheckForMinGWw64Sub = True
1677	g_strSubOutput = strVer
1678	else
1679	LogPrint "MinGW-w64 version '" & iMajor & "." & iMinor & "." & iPatch & "' is not supported (or configure.vbs failed to parse it correctly)."
1680	end if
1681	else
1682	LogPrint "Couldn't locate the GCC version in the output!"
1683	end if
1684
1685	else
1686	LogPrint "Failed to run gcc.exe!"
1687	end if
1688	end if
1689	end function
1690
1691
1692	''
1693	' Checks for any libSDL binaries.
1694	sub CheckForlibSDL(strOptlibSDL)
1695	dim strPathlibSDL, str
1696	PrintHdr "libSDL"
1697
1698	'
1699	' Try find some SDL library.
1700	'
1701
1702	' First, the specific location.
1703	strPathlibSDL = ""
1704	if (strPathlibSDL = "") And (strOptlibSDL <> "") then
1705	if CheckForlibSDLSub(strOptlibSDL) then strPathlibSDL = strOptlibSDL
1706	end if
1707
1708	' The tools location (first).
1709	if (strPathlibSDL = "") And (g_blnInternalFirst = True) Then
1710	str = g_strPathDev & "/win.x86/libsdl/v1.2.11"
1711	if CheckForlibSDLSub(str) then strPathlibSDL = str
1712	end if
1713
1714	if (strPathlibSDL = "") And (g_blnInternalFirst = True) Then
1715	str = g_strPathDev & "/win.x86/libsdl/v1.2.7-InnoTek"
1716	if CheckForlibSDLSub(str) then strPathlibSDL = str
1717	end if
1718
1719	' Poke about in the path.
1720	str = Which("SDLmain.lib")
1721	if (strPathlibSDL = "") And (str <> "") Then
1722	str = PathParent(PathStripFilename(str))
1723	if CheckForlibSDLSub(str) then strPathlibSDL = str
1724	end if
1725
1726	str = Which("SDL.dll")
1727	if (strPathlibSDL = "") And (str <> "") Then
1728	str = PathParent(PathStripFilename(str))
1729	if CheckForlibSDLSub(str) then strPathlibSDL = str
1730	end if
1731
1732	' The tools location (post).
1733	if (strPathlibSDL = "") And (g_blnInternalFirst = False) Then
1734	str = g_strPathDev & "/win.x86/libsdl/v1.2.11"
1735	if CheckForlibSDLSub(str) then strPathlibSDL = str
1736	end if
1737
1738	if (strPathlibSDL = "") And (g_blnInternalFirst = False) Then
1739	str = g_strPathDev & "/win.x86/libsdl/v1.2.7-InnoTek"
1740	if CheckForlibSDLSub(str) then strPathlibSDL = str
1741	end if
1742
1743	' Success?
1744	if strPathlibSDL = "" then
1745	if strOptlibSDL = "" then
1746	MsgError "Can't locate libSDL. Try specify the path with the --with-libSDL=<path> argument. " _
1747	& "If still no luck, consult the configure.log and the build requirements."
1748	else
1749	MsgError "Can't locate libSDL. Please consult the configure.log and the build requirements."
1750	end if
1751	exit sub
1752	end if
1753
1754	strPathLibSDL = UnixSlashes(PathAbs(strPathLibSDL))
1755	CfgPrint "PATH_SDK_LIBSDL := " & strPathlibSDL
1756
1757	PrintResult "libSDL", strPathlibSDL
1758	end sub
1759
1760	''
1761	' Checks if the specified path points to an usable libSDL or not.
1762	function CheckForlibSDLSub(strPathlibSDL)
1763	CheckForlibSDLSub = False
1764	LogPrint "trying: strPathlibSDL=" & strPathlibSDL
1765	if LogFileExists(strPathlibSDL, "lib/SDL.lib") _
1766	And LogFileExists(strPathlibSDL, "lib/SDLmain.lib") _
1767	And LogFileExists(strPathlibSDL, "lib/SDL.dll") _
1768	And LogFileExists(strPathlibSDL, "include/SDL.h") _
1769	And LogFileExists(strPathlibSDL, "include/SDL_syswm.h") _
1770	And LogFileExists(strPathlibSDL, "include/SDL_version.h") _
1771	then
1772	CheckForlibSDLSub = True
1773	end if
1774	end function
1775
1776
1777	''
1778	' Checks for libxml2.
1779	sub CheckForXml2(strOptXml2)
1780	dim strPathXml2, str
1781	PrintHdr "libxml2"
1782
1783	' Skip if no COM/ATL.
1784	if g_blnDisableCOM then
1785	PrintResultMsg "libxml2", "Skipped (" & g_strDisableCOM & ")"
1786	exit sub
1787	end if
1788
1789	'
1790	' Try find some xml2 dll/lib.
1791	'
1792	strPathXml2 = ""
1793	if (strPathXml2 = "") And (strOptXml2 <> "") then
1794	if CheckForXml2Sub(strOptXml2) then strPathXml2 = strOptXml2
1795	end if
1796
1797	if strPathXml2 = "" Then
1798	str = Which("libxml2.lib")
1799	if str <> "" Then
1800	str = PathParent(PathStripFilename(str))
1801	if CheckForXml2Sub(str) then strPathXml2 = str
1802	end if
1803	end if
1804
1805	' Ignore failure if we're in 'internal' mode.
1806	if (strPathXml2 = "") and g_blnInternalMode then
1807	PrintResultMsg "libxml2", "ignored (internal mode)"
1808	exit sub
1809	end if
1810
1811	' Success?
1812	if strPathXml2 = "" then
1813	if strOptXml2 = "" then
1814	MsgError "Can't locate libxml2. Try specify the path with the --with-libxml2=<path> argument. " _
1815	& "If still no luck, consult the configure.log and the build requirements."
1816	else
1817	MsgError "Can't locate libxml2. Please consult the configure.log and the build requirements."
1818	end if
1819	exit sub
1820	end if
1821
1822	strPathXml2 = UnixSlashes(PathAbs(strPathXml2))
1823	CfgPrint "SDK_VBOX_LIBXML2_INCS := " & strPathXml2 & "/include"
1824	CfgPrint "SDK_VBOX_LIBXML2_LIBS := " & strPathXml2 & "/lib/libxml2.lib"
1825
1826	PrintResult "libxml2", strPathXml2
1827	end sub
1828
1829	''
1830	' Checks if the specified path points to an usable libxml2 or not.
1831	function CheckForXml2Sub(strPathXml2)
1832	dim str
1833
1834	CheckForXml2Sub = False
1835	LogPrint "trying: strPathXml2=" & strPathXml2
1836	if LogFileExists(strPathXml2, "include/libxml/xmlexports.h") _
1837	And LogFileExists(strPathXml2, "include/libxml/xmlreader.h") _
1838	then
1839	str = LogFindFile(strPathXml2, "bin/libxml2.dll")
1840	if str <> "" then
1841	if LogFindFile(strPathXml2, "lib/libxml2.lib") <> "" then
1842	CheckForXml2Sub = True
1843	end if
1844	end if
1845	end if
1846	end function
1847
1848
1849	''
1850	' Checks for openssl
1851	sub CheckForSsl(strOptSsl, bln32Bit)
1852	dim strPathSsl, str
1853	PrintHdr "openssl"
1854
1855	strOpenssl = "openssl"
1856	if bln32Bit = True then
1857	strOpenssl = "openssl32"
1858	end if
1859
1860	'
1861	' Try find some openssl dll/lib.
1862	'
1863	strPathSsl = ""
1864	if (strPathSsl = "") And (strOptSsl <> "") then
1865	if CheckForSslSub(strOptSsl) then strPathSsl = strOptSsl
1866	end if
1867
1868	if strPathSsl = "" Then
1869	str = Which("libssl.lib")
1870	if str <> "" Then
1871	str = PathParent(PathStripFilename(str))
1872	if CheckForSslSub(str) then strPathSsl = str
1873	end if
1874	end if
1875
1876	' Ignore failure if we're in 'internal' mode.
1877	if (strPathSsl = "") and g_blnInternalMode then
1878	PrintResultMsg strOpenssl, "ignored (internal mode)"
1879	exit sub
1880	end if
1881
1882	' Success?
1883	if strPathSsl = "" then
1884	if strOptSsl = "" then
1885	MsgError "Can't locate " & strOpenssl & ". " _
1886	& "Try specify the path with the --with-" & strOpenssl & "=<path> argument. " _
1887	& "If still no luck, consult the configure.log and the build requirements."
1888	else
1889	MsgError "Can't locate " & strOpenssl & ". " _
1890	& "Please consult the configure.log and the build requirements."
1891	end if
1892	exit sub
1893	end if
1894
1895	strPathSsl = UnixSlashes(PathAbs(strPathSsl))
1896	if bln32Bit = True then
1897	CfgPrint "SDK_VBOX_OPENSSL-x86_INCS := " & strPathSsl & "/include"
1898	CfgPrint "SDK_VBOX_OPENSSL-x86_LIBS := " & strPathSsl & "/lib/libcrypto.lib" & " " & strPathSsl & "/lib/libssl.lib"
1899	CfgPrint "SDK_VBOX_BLD_OPENSSL-x86_LIBS := " & strPathSsl & "/lib/libcrypto.lib" & " " & strPathSsl & "/lib/libssl.lib"
1900	else
1901	CfgPrint "SDK_VBOX_OPENSSL_INCS := " & strPathSsl & "/include"
1902	CfgPrint "SDK_VBOX_OPENSSL_LIBS := " & strPathSsl & "/lib/libcrypto.lib" & " " & strPathSsl & "/lib/libssl.lib"
1903	CfgPrint "SDK_VBOX_BLD_OPENSSL_LIBS := " & strPathSsl & "/lib/libcrypto.lib" & " " & strPathSsl & "/lib/libssl.lib"
1904	end if
1905
1906	PrintResult strOpenssl, strPathSsl
1907	end sub
1908
1909	''
1910	' Checks if the specified path points to an usable openssl or not.
1911	function CheckForSslSub(strPathSsl)
1912
1913	CheckForSslSub = False
1914	LogPrint "trying: strPathSsl=" & strPathSsl
1915	if LogFileExists(strPathSsl, "include/openssl/md5.h") _
1916	And LogFindFile(strPathSsl, "lib/libssl.lib") <> "" _
1917	then
1918	CheckForSslSub = True
1919	end if
1920	end function
1921
1922
1923	''
1924	' Checks for libcurl
1925	sub CheckForCurl(strOptCurl, bln32Bit)
1926	dim strPathCurl, str
1927	PrintHdr "libcurl"
1928
1929	strCurl = "libcurl"
1930	if bln32Bit = True then
1931	strCurl = "libcurl32"
1932	end if
1933
1934	'
1935	' Try find some cURL dll/lib.
1936	'
1937	strPathCurl = ""
1938	if (strPathCurl = "") And (strOptCurl <> "") then
1939	if CheckForCurlSub(strOptCurl) then strPathCurl = strOptCurl
1940	end if
1941
1942	if strPathCurl = "" Then
1943	str = Which("libcurl.lib")
1944	if str <> "" Then
1945	str = PathParent(PathStripFilename(str))
1946	if CheckForCurlSub(str) then strPathCurl = str
1947	end if
1948	end if
1949
1950	' Ignore failure if we're in 'internal' mode.
1951	if (strPathCurl = "") and g_blnInternalMode then
1952	PrintResultMsg strCurl, "ignored (internal mode)"
1953	exit sub
1954	end if
1955
1956	' Success?
1957	if strPathCurl = "" then
1958	if strOptCurl = "" then
1959	MsgError "Can't locate " & strCurl & ". " _
1960	& "Try specify the path with the --with-" & strCurl & "=<path> argument. " _
1961	& "If still no luck, consult the configure.log and the build requirements."
1962	else
1963	MsgError "Can't locate " & strCurl & ". " _
1964	& "Please consult the configure.log and the build requirements."
1965	end if
1966	exit sub
1967	end if
1968
1969	strPathCurl = UnixSlashes(PathAbs(strPathCurl))
1970	if bln32Bit = True then
1971	CfgPrint "SDK_VBOX_LIBCURL-x86_INCS := " & strPathCurl & "/include"
1972	CfgPrint "SDK_VBOX_LIBCURL-x86_LIBS.x86 := " & strPathCurl & "/libcurl.lib"
1973	else
1974	CfgPrint "SDK_VBOX_LIBCURL_INCS := " & strPathCurl & "/include"
1975	CfgPrint "SDK_VBOX_LIBCURL_LIBS := " & strPathCurl & "/libcurl.lib"
1976	end if
1977
1978	PrintResult strCurl, strPathCurl
1979	end sub
1980
1981	''
1982	' Checks if the specified path points to an usable libcurl or not.
1983	function CheckForCurlSub(strPathCurl)
1984
1985	CheckForCurlSub = False
1986	LogPrint "trying: strPathCurl=" & strPathCurl
1987	if LogFileExists(strPathCurl, "include/curl/curl.h") _
1988	And LogFindFile(strPathCurl, "libcurl.dll") <> "" _
1989	And LogFindFile(strPathCurl, "libcurl.lib") <> "" _
1990	then
1991	CheckForCurlSub = True
1992	end if
1993	end function
1994
1995
1996
1997	''
1998	' Checks for any Qt5 binaries.
1999	sub CheckForQt(strOptQt5)
2000	PrintHdr "Qt5"
2001
2002	'
2003	' Try to find the Qt5 installation (user specified path with --with-qt5)
2004	'
2005	strPathQt5 = ""
2006
2007	LogPrint "Checking for user specified path of Qt5 ... "
2008	if (strPathQt5 = "") And (strOptQt5 <> "") then
2009	strOptQt5 = UnixSlashes(strOptQt5)
2010	if CheckForQt5Sub(strOptQt5) then strPathQt5 = strOptQt5
2011	end if
2012
2013	' Check the dev tools
2014	if (strPathQt5 = "") Then
2015	strPathQt5 = g_strPathDev & "/win." & g_strTargetArch & "/qt/v5.5.1-r138"
2016	if CheckForQt5Sub(strPathQt5) = False then strPathQt5 = ""
2017	end if
2018
2019	' Display the result.
2020	if strPathQt5 = "" then
2021	PrintResultMsg "Qt5", "not found"
2022	else
2023	PrintResult "Qt5", strPathQt5
2024	end if
2025
2026	if strPathQt5 <> "" then
2027	CfgPrint "PATH_SDK_QT5 := " & strPathQt5
2028	CfgPrint "PATH_TOOL_QT5 := $(PATH_SDK_QT5)"
2029	CfgPrint "VBOX_PATH_QT := $(PATH_SDK_QT5)"
2030	end if
2031	if strPathQt5 = "" then
2032	CfgPrint "VBOX_WITH_QTGUI :="
2033	end if
2034	end sub
2035
2036
2037	''
2038	' Checks if the specified path points to an usable Qt5 library.
2039	function CheckForQt5Sub(strPathQt5)
2040
2041	CheckForQt5Sub = False
2042	LogPrint "trying: strPathQt5=" & strPathQt5
2043
2044	if LogFileExists(strPathQt5, "bin/moc.exe") _
2045	And LogFileExists(strPathQt5, "bin/uic.exe") _
2046	And LogFileExists(strPathQt5, "include/QtWidgets/qwidget.h") _
2047	And LogFileExists(strPathQt5, "include/QtWidgets/QApplication") _
2048	And LogFileExists(strPathQt5, "include/QtGui/QImage") _
2049	And LogFileExists(strPathQt5, "include/QtNetwork/QHostAddress") _
2050	And ( LogFileExists(strPathQt5, "lib/Qt5Core.lib") _
2051	Or LogFileExists(strPathQt5, "lib/Qt5CoreVBox.lib")) _
2052	And ( LogFileExists(strPathQt5, "lib/Qt5Network.lib") _
2053	Or LogFileExists(strPathQt5, "lib/Qt5NetworkVBox.lib")) _
2054	then
2055	CheckForQt5Sub = True
2056	end if
2057
2058	end function
2059
2060
2061	'
2062	'
2063	function CheckForPython(strPathPython)
2064
2065	PrintHdr "Python"
2066
2067	CheckForPython = False
2068	LogPrint "trying: strPathPython=" & strPathPython
2069
2070	if LogFileExists(strPathPython, "python.exe") then
2071	CfgPrint "VBOX_BLD_PYTHON := " & strPathPython & "\python.exe"
2072	CheckForPython = True
2073	end if
2074
2075	PrintResult "Python ", strPathPython
2076	end function
2077
2078
2079	'
2080	'
2081	function CheckForMkisofs(strFnameMkisofs)
2082
2083	PrintHdr "mkisofs"
2084
2085	CheckForMkisofs = False
2086	LogPrint "trying: strFnameMkisofs=" & strFnameMkisofs
2087
2088	if FileExists(strFnameMkisofs) = false then
2089	LogPrint "Testing '" & strFnameMkisofs & " not found"
2090	else
2091	CfgPrint "VBOX_MKISOFS := " & strFnameMkisofs
2092	CheckForMkisofs = True
2093	end if
2094
2095	PrintResult "mkisofs ", strFnameMkisofs
2096	end function
2097
2098
2099	''
2100	' Show usage.
2101	sub usage
2102	Print "Usage: cscript configure.vbs [options]"
2103	Print ""
2104	Print "Configuration:"
2105	Print " -h, --help"
2106	Print " --internal"
2107	Print " --internal-last"
2108	Print " --target-arch=x86\|amd64"
2109	Print ""
2110	Print "Components:"
2111	Print " --disable-COM"
2112	Print " --disable-UDPTunnel"
2113	Print " --disable-SDL"
2114	Print ""
2115	Print "Locations:"
2116	Print " --with-kBuild=PATH "
2117	Print " --with-libSDL=PATH "
2118	Print " --with-MinGW32=PATH "
2119	Print " --with-MinGW-w64=PATH "
2120	Print " --with-Qt5=PATH "
2121	Print " --with-DDK=PATH "
2122	Print " --with-SDK=PATH "
2123	Print " --with-VC=PATH "
2124	Print " --with-VC-Common=PATH "
2125	Print " --with-VC-Express-Edition"
2126	Print " --with-W32API=PATH "
2127	Print " --with-libxml2=PATH "
2128	Print " --with-openssl=PATH "
2129	Print " --with-openssl32=PATH (only for 64-bit targets)"
2130	Print " --with-libcurl=PATH "
2131	Print " --with-libcurl32=PATH (only for 64-bit targets)"
2132	Print " --with-python=PATH "
2133	Print " --with-mkisofs=PATH "
2134	end sub
2135
2136
2137	''
2138	' The main() like function.
2139	'
2140	Sub Main
2141	'
2142	' Write the log header and check that we're not using wscript.
2143	'
2144	LogInit
2145	If UCase(Right(Wscript.FullName, 11)) = "WSCRIPT.EXE" Then
2146	Wscript.Echo "This script must be run under CScript."
2147	Wscript.Quit(1)
2148	End If
2149
2150	'
2151	' Parse arguments.
2152	'
2153	strOptDDK = ""
2154	strOptDXDDK = ""
2155	strOptkBuild = ""
2156	strOptlibSDL = ""
2157	strOptMinGW32 = ""
2158	strOptMinGWw64 = ""
2159	strOptQt5 = ""
2160	strOptSDK = ""
2161	strOptVC = ""
2162	strOptVCCommon = ""
2163	blnOptVCExpressEdition = False
2164	strOptW32API = ""
2165	strOptXml2 = ""
2166	strOptSsl = ""
2167	strOptSsl32 = ""
2168	strOptCurl = ""
2169	strOptCurl32 = ""
2170	strOptPython = ""
2171	strOptMkisofs = ""
2172	blnOptDisableCOM = False
2173	blnOptDisableUDPTunnel = False
2174	blnOptDisableSDL = False
2175	for i = 1 to Wscript.Arguments.Count
2176	dim str, strArg, strPath
2177
2178	' Separate argument and path value
2179	str = Wscript.Arguments.item(i - 1)
2180	if InStr(1, str, "=") > 0 then
2181	strArg = Mid(str, 1, InStr(1, str, "=") - 1)
2182	strPath = Mid(str, InStr(1, str, "=") + 1)
2183	if strPath = "" then MsgFatal "Syntax error! Argument #" & i & " is missing the path."
2184	else
2185	strArg = str
2186	strPath = ""
2187	end if
2188
2189	' Process the argument
2190	select case LCase(strArg)
2191	case "--with-ddk"
2192	strOptDDK = strPath
2193	case "--with-dxsdk"
2194	MsgWarning "Ignoring --with-dxsdk (the DirectX SDK is no longer required)."
2195	case "--with-kbuild"
2196	strOptkBuild = strPath
2197	case "--with-libsdl"
2198	strOptlibSDL = strPath
2199	case "--with-mingw32"
2200	strOptMinGW32 = strPath
2201	case "--with-mingw-w64"
2202	strOptMinGWw64 = strPath
2203	case "--with-qt5"
2204	strOptQt5 = strPath
2205	case "--with-sdk"
2206	strOptSDK = strPath
2207	case "--with-vc"
2208	strOptVC = strPath
2209	case "--with-vc-common"
2210	strOptVCCommon = strPath
2211	case "--with-vc-express-edition"
2212	blnOptVCExpressEdition = True
2213	case "--with-w32api"
2214	strOptW32API = strPath
2215	case "--with-libxml2"
2216	strOptXml2 = strPath
2217	case "--with-openssl"
2218	strOptSsl = strPath
2219	case "--with-openssl32"
2220	strOptSsl32 = strPath
2221	case "--with-libcurl"
2222	strOptCurl = strPath
2223	case "--with-libcurl32"
2224	strOptCurl32 = strPath
2225	case "--with-python"
2226	strOptPython = strPath
2227	case "--with-mkisofs"
2228	strOptMkisofs = strPath
2229	case "--disable-com"
2230	blnOptDisableCOM = True
2231	case "--enable-com"
2232	blnOptDisableCOM = False
2233	case "--disable-udptunnel"
2234	blnOptDisableUDPTunnel = True
2235	case "--disable-sdl"
2236	blnOptDisableSDL = True
2237	case "--internal"
2238	g_blnInternalMode = True
2239	case "--internal-last"
2240	g_blnInternalFirst = False
2241	case "--target-arch"
2242	g_strTargetArch = strPath
2243	case "-h", "--help", "-?"
2244	usage
2245	Wscript.Quit(0)
2246	case else
2247	Wscript.echo "syntax error: Unknown option '" & str &"'."
2248	usage
2249	Wscript.Quit(1)
2250	end select
2251	next
2252
2253	'
2254	' Initialize output files.
2255	'
2256	CfgInit
2257	EnvInit
2258
2259	'
2260	' Check that the Shell function is sane.
2261	'
2262	g_objShell.Environment("PROCESS")("TESTING_ENVIRONMENT_INHERITANCE") = "This works"
2263	if Shell("set TESTING_ENVIRONMENT_INHERITANC", False) <> 0 then ' The 'E' is missing on purpose (4nt).
2264	MsgFatal "shell execution test failed!"
2265	end if
2266	if g_strShellOutput <> "TESTING_ENVIRONMENT_INHERITANCE=This works" & CHR(13) & CHR(10) then
2267	Print "Shell test Test -> '" & g_strShellOutput & "'"
2268	MsgFatal "shell inheritance or shell execution isn't working right. Make sure you use cmd.exe."
2269	end if
2270	g_objShell.Environment("PROCESS")("TESTING_ENVIRONMENT_INHERITANCE") = ""
2271	Print "Shell inheritance test: OK"
2272
2273	'
2274	' Do the checks.
2275	'
2276	if blnOptDisableCOM = True then
2277	DisableCOM "--disable-com"
2278	end if
2279	if blnOptDisableUDPTunnel = True then
2280	DisableUDPTunnel "--disable-udptunnel"
2281	end if
2282	CheckSourcePath
2283	CheckForkBuild strOptkBuild
2284	CheckForWinDDK strOptDDK
2285	CheckForVisualCPP strOptVC, strOptVCCommon, blnOptVCExpressEdition
2286	CheckForPlatformSDK strOptSDK
2287	CheckForMidl
2288	CheckForMinGW32 strOptMinGW32, strOptW32API
2289	CheckForMinGWw64 strOptMinGWw64
2290	CfgPrint "VBOX_WITH_OPEN_WATCOM := " '' @todo look for openwatcom 1.9+
2291	CfgPrint "VBOX_WITH_LIBVPX := " '' @todo look for libvpx 1.1.0+
2292	CfgPrint "VBOX_WITH_LIBOPUS := " '' @todo look for libopus 1.2.1+
2293	EnvPrint "set PATH=%PATH%;" & g_strPath& "/tools/win." & g_strTargetArch & "/bin;" '' @todo look for yasm
2294	if blnOptDisableSDL = True then
2295	DisableSDL "--disable-sdl"
2296	else
2297	CheckForlibSDL strOptlibSDL
2298	end if
2299	' Don't check for this library by default as it's part of the tarball
2300	' Using an external library can add a dependency to iconv
2301	if (strOptXml2 <> "") then
2302	CheckForXml2 strOptXml2
2303	end if
2304	CheckForSsl strOptSsl, False
2305	if g_strTargetArch = "amd64" then
2306	' 32-bit openssl required as well
2307	CheckForSsl strOptSsl32, True
2308	end if
2309	CheckForCurl strOptCurl, False
2310	if g_strTargetArch = "amd64" then
2311	' 32-bit Curl required as well
2312	CheckForCurl strOptCurl32, True
2313	end if
2314	CheckForQt strOptQt5
2315	if (strOptPython <> "") then
2316	CheckForPython strOptPython
2317	end if
2318	if (strOptMkisofs <> "") then
2319	CheckForMkisofs strOptMkisofs
2320	end if
2321	if g_blnInternalMode then
2322	EnvPrint "call " & g_strPathDev & "/env.cmd %1 %2 %3 %4 %5 %6 %7 %8 %9"
2323	end if
2324
2325	Print ""
2326	Print "Execute env.bat once before you start to build VBox:"
2327	Print ""
2328	Print " env.bat"
2329	Print " kmk"
2330	Print ""
2331
2332	End Sub
2333
2334
2335	Main
2336

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format