VirtualBox

source: vbox/trunk/configure.vbs@ 5687

Last change on this file since 5687 was 5506, checked in by vboxsync, 17 years ago

try locate midl.exe (Visual C++ PSDK problem).
  • Property svn:eol-style set to CRLF
  • Property svn:keywords set to Id
File size: 57.0 KB
Line 
1' $Id: configure.vbs 5506 2007-10-26 00:38:41Z vboxsync $
2'' @file
3' The purpose of this script is to check for all external tools, headers, and
4' libraries VBox OSE depends on.
5'
6' The script generates the build configuration file 'AutoConfig.kmk' and the
7' environment setup script 'env.bat'. A log of what has been done is
8' written to 'configure.log'.
9'
10
11'
12' Copyright (C) 2006-2007 innotek GmbH
13'
14' This file is part of VirtualBox Open Source Edition (OSE), as
15' available from http://www.virtualbox.org. This file is free software;
16' you can redistribute it and/or modify it under the terms of the GNU
17' General Public License as published by the Free Software Foundation,
18' in version 2 as it comes in the "COPYING" file of the VirtualBox OSE
19' distribution. VirtualBox OSE is distributed in the hope that it will
20' be useful, but WITHOUT ANY WARRANTY of any kind.
21'
22
23
24'*****************************************************************************
25'* Global Variables *
26'*****************************************************************************
27dim g_strPath, g_strEnvFile, g_strLogFile, g_strCfgFile, g_strShellOutput
28g_strPath = Left(Wscript.ScriptFullName, Len(Wscript.ScriptFullName) - Len("\configure.vbs"))
29g_strEnvFile = g_strPath & "\env.bat"
30g_strCfgFile = g_strPath & "\AutoConfig.kmk"
31g_strLogFile = g_strPath & "\configure.log"
32'g_strTmpFile = g_strPath & "\configure.tmp"
33
34dim g_objShell, g_objFileSys
35Set g_objShell = WScript.CreateObject("WScript.Shell")
36Set g_objFileSys = WScript.CreateObject("Scripting.FileSystemObject")
37
38dim g_strPathkBuild, g_strPathkBuildBin, g_strPathDev, g_strPathVCC, g_strPathPSDK, g_strPathDDK, g_strSubOutput
39g_strPathkBuild = ""
40g_strPathDev = ""
41g_strPathVCC = ""
42g_strPathPSDK = ""
43g_strPathDDK = ""
44
45dim g_blnDisableCOM, g_strDisableCOM
46g_blnDisableCOM = False
47g_strDisableCOM = ""
48
49' The internal mode is primarily for skipping the xerces and xalan monsters.
50dim g_blnInternalMode
51g_blnInternalMode = False
52
53
54
55''
56' Converts to unix slashes
57function UnixSlashes(str)
58 UnixSlashes = replace(str, "\", "/")
59end function
60
61
62''
63' Converts to dos slashes
64function DosSlashes(str)
65 DosSlashes = replace(str, "/", "\")
66end function
67
68
69''
70' Read a file (typically the tmp file) into a string.
71function FileToString(strFilename)
72 const ForReading = 1, TristateFalse = 0
73 dim objLogFile, str
74
75 set objFile = g_objFileSys.OpenTextFile(DosSlashes(strFilename), ForReading, False, TristateFalse)
76 str = objFile.ReadAll()
77 objFile.Close()
78
79 FileToString = str
80end function
81
82
83''
84' Deletes a file
85sub FileDelete(strFilename)
86 if g_objFileSys.FileExists(DosSlashes(strFilename)) then
87 g_objFileSys.DeleteFile(DosSlashes(strFilename))
88 end if
89end sub
90
91
92''
93' Appends a line to an ascii file.
94sub FileAppendLine(strFilename, str)
95 const ForAppending = 8, TristateFalse = 0
96 dim objFile
97
98 set objFile = g_objFileSys.OpenTextFile(DosSlashes(strFilename), ForAppending, True, TristateFalse)
99 objFile.WriteLine(str)
100 objFile.Close()
101end sub
102
103
104''
105' Checks if the file exists.
106function FileExists(strFilename)
107 FileExists = g_objFileSys.FileExists(DosSlashes(strFilename))
108end function
109
110
111''
112' Checks if the directory exists.
113function DirExists(strDirectory)
114 DirExists = g_objFileSys.FolderExists(DosSlashes(strDirectory))
115end function
116
117''
118' Gets a value from the registry. Returns "" if string wasn't found / valid.
119function RegGetString(strName)
120 RegGetString = ""
121 On Error Resume Next
122 RegGetString = g_objShell.RegRead(strName)
123end function
124
125''
126' Returns an array of subkey strings.
127function RegEnumSubKeys(strRoot, strKeyPath)
128 const HKEY_LOCAL_MACHINE = &H80000002
129 const HKEY_CURRENT_USER = &H80000001
130 dim objReg, iRoot
131 set objReg = GetObject("winmgmts:{impersonationLevel=impersonate}!\\.\root\default:StdRegProv")
132
133 select case strRoot
134 case "HKLM"
135 iRoot = HKEY_LOCAL_MACHINE
136 case "HKCU"
137 iRoot = HKEY_CURRENT_USER
138 case else
139 MsgFatal "RegEnumSubKeys: Unknown root: " & strRoot
140 end select
141
142 On Error Resume Next
143 rc = objReg.EnumKey(iRoot, strKeyPath, arrSubKeys)
144 if rc = 0 then
145 RegEnumSubKeys = arrSubKeys
146 else
147 RegEnumSubKeys = Array()
148 end if
149end function
150
151
152''
153' Gets the commandline used to invoke the script.
154function GetCommandline()
155 dim str, i
156
157 '' @todo find an api for querying it instead of reconstructing it like this...
158 GetCommandline = "cscript configure.vbs"
159 for i = 1 to WScript.Arguments.Count
160 str = WScript.Arguments.Item(i - 1)
161 if str = "" then
162 str = """"""
163 elseif (InStr(1, str, " ")) then
164 str = """" & str & """"
165 end if
166 GetCommandline = GetCommandline & " " & str
167 next
168end function
169
170
171''
172' Gets an environment variable.
173function EnvGet(strName)
174 EnvGet = g_objShell.Environment("PROCESS")(strName)
175end function
176
177
178''
179' Sets an environment variable.
180sub EnvSet(strName, strValue)
181 g_objShell.Environment("PROCESS")(strName) = strValue
182 LogPrint "EnvSet: " & strName & "=" & strValue
183end sub
184
185
186''
187' Appends a string to an environment variable
188sub EnvAppend(strName, strValue)
189 dim str
190 str = g_objShell.Environment("PROCESS")(strName)
191 g_objShell.Environment("PROCESS")(strName) = str & strValue
192 LogPrint "EnvAppend: " & strName & "=" & str & strValue
193end sub
194
195
196''
197' Prepends a string to an environment variable
198sub EnvPrepend(strName, strValue)
199 dim str
200 str = g_objShell.Environment("PROCESS")(strName)
201 g_objShell.Environment("PROCESS")(strName) = strValue & str
202 LogPrint "EnvPrepend: " & strName & "=" & strValue & str
203end sub
204
205
206''
207' Get the path of the parent directory. Returns root if root was specified.
208' Expects abs path.
209function PathParent(str)
210 PathParent = g_objFileSys.GetParentFolderName(DosSlashes(str))
211end function
212
213
214''
215' Strips the filename from at path.
216function PathStripFilename(str)
217 PathStripFilename = g_objFileSys.GetParentFolderName(DosSlashes(str))
218end function
219
220
221''
222' Get the abs path, use the short version if necessary.
223function PathAbs(str)
224 PathAbs = g_objFileSys.GetAbsolutePathName(DosSlashes(str))
225 if (InStr(1, PathAbs, " ") > 0) _
226 Or (InStr(1, PathAbs, "&") > 0) _
227 Or (InStr(1, PathAbs, "$") > 0) _
228 then
229 if FileExists(PathAbs) then
230 dim objFile
231 set objFile = g_objFileSys.GetFile(PathAbs)
232 PathAbs = objFile.ShortPath
233 elseif DirExists(PathAbs) then
234 dim objFolder
235 set objFolder = g_objFileSys.GetFolder(PathAbs)
236 PathAbs = objFolder.ShortPath
237 else
238 ' ignore non-existing paths.
239 end if
240 end if
241
242
243 if (FileExists(PathAbs) Or DirExists(PathAbs)) _
244 And ( (InStr(1, PathAbs, " ") > 0) _
245 Or (InStr(1, PathAbs, "&") > 0) _
246 Or (InStr(1, PathAbs, "$") > 0)) _
247 then
248 MsgFatal "PathAbs(" & str & ") attempted to return filename with problematic " _
249 & "characters in it (" & PathAbs & "). The tool/sdk referenced will probably " _
250 & "need to be copied or reinstalled to a location without 'spaces', '$', ';' " _
251 & "or '&' in the path name. (Unless it's a problem with this script of course...)"
252 end if
253end function
254
255
256''
257' Executes a command in the shell catching output in g_strShellOutput
258function Shell(strCommand, blnBoth)
259 dim strShell, strCmdline, objExec, str
260
261 strShell = g_objShell.ExpandEnvironmentStrings("%ComSpec%")
262 if blnBoth = true then
263 strCmdline = strShell & " /c " & strCommand & " 2>&1"
264 else
265 strCmdline = strShell & " /c " & strCommand & " 2>nul"
266 end if
267
268 LogPrint "# Shell: " & strCmdline
269 Set objExec = g_objShell.Exec(strCmdLine)
270 g_strShellOutput = objExec.StdOut.ReadAll()
271 objExec.StdErr.ReadAll()
272 do while objExec.Status = 0
273 Wscript.Sleep 20
274 g_strShellOutput = g_strShellOutput & objExec.StdOut.ReadAll()
275 objExec.StdErr.ReadAll()
276 loop
277
278 LogPrint "# Status: " & objExec.ExitCode
279 LogPrint "# Start of Output"
280 LogPrint g_strShellOutput
281 LogPrint "# End of Output"
282
283 Shell = objExec.ExitCode
284end function
285
286
287''
288' Try find the specified file in the path.
289function Which(strFile)
290 dim strPath, iStart, iEnd, str
291
292 ' the path
293 strPath = EnvGet("Path")
294 iStart = 1
295 do while iStart <= Len(strPath)
296 iEnd = InStr(iStart, strPath, ";")
297 if iEnd <= 0 then iEnd = Len(strPath) + 1
298 if iEnd > iStart then
299 str = Mid(strPath, iStart, iEnd - iStart) & "/" & strFile
300 if FileExists(str) then
301 Which = str
302 exit function
303 end if
304 end if
305 iStart = iEnd + 1
306 loop
307
308 ' registry or somewhere?
309
310 Which = ""
311end function
312
313
314''
315' Append text to the log file and echo it to stdout
316sub Print(str)
317 LogPrint str
318 Wscript.Echo str
319end sub
320
321
322''
323' Prints a test header
324sub PrintHdr(strTest)
325 LogPrint "***** Checking for " & strTest & " *****"
326 Wscript.Echo "Checking for " & StrTest & "..."
327end sub
328
329
330''
331' Prints a success message
332sub PrintResult(strTest, strResult)
333 LogPrint "** " & strTest & ": " & strResult
334 Wscript.Echo " Found "& strTest & ": " & strResult
335end sub
336
337
338''
339' Warning message.
340sub MsgWarning(strMsg)
341 Print "warning: " & strMsg
342end sub
343
344
345''
346' Fatal error.
347sub MsgFatal(strMsg)
348 Print "fatal error: " & strMsg
349 Wscript.Quit
350end sub
351
352
353''
354' Error message, fatal unless flag to ignore errors is given.
355sub MsgError(strMsg)
356 Print "error: " & strMsg
357 if g_blnInternalMode = False then
358 Wscript.Quit
359 end if
360end sub
361
362
363''
364' Write a log header with some basic info.
365sub LogInit
366 FileDelete g_strLogFile
367 LogPrint "# Log file generated by " & Wscript.ScriptFullName
368 for i = 1 to WScript.Arguments.Count
369 LogPrint "# Arg #" & i & ": " & WScript.Arguments.Item(i - 1)
370 next
371 if Wscript.Arguments.Count = 0 then
372 LogPrint "# No arguments given"
373 end if
374 LogPrint "# Reconstructed command line: " & GetCommandline()
375
376 ' some Wscript stuff
377 LogPrint "# Wscript properties:"
378 LogPrint "# ScriptName: " & Wscript.ScriptName
379 LogPrint "# Version: " & Wscript.Version
380 LogPrint "# Build: " & Wscript.BuildVersion
381 LogPrint "# Name: " & Wscript.Name
382 LogPrint "# Full Name: " & Wscript.FullName
383 LogPrint "# Path: " & Wscript.Path
384 LogPrint "#"
385
386
387 ' the environment
388 LogPrint "# Environment:"
389 dim objEnv
390 for each strVar in g_objShell.Environment("PROCESS")
391 LogPrint "# " & strVar
392 next
393 LogPrint "#"
394end sub
395
396
397''
398' Append text to the log file.
399sub LogPrint(str)
400 FileAppendLine g_strLogFile, str
401 'Wscript.Echo "dbg: " & str
402end sub
403
404
405''
406' Checks if the file exists and logs failures.
407function LogFileExists(strPath, strFilename)
408 LogFileExists = FileExists(strPath & "/" & strFilename)
409 if LogFileExists = False then
410 LogPrint "Testing '" & strPath & "': " & strFilename & " not found"
411 end if
412
413end function
414
415
416''
417' Finds the first file matching the pattern.
418' If no file is found, log the failure.
419function LogFindFile(strPath, strPattern)
420 dim str
421
422 '
423 ' Yes, there are some facy database kinda interface to the filesystem
424 ' however, breaking down the path and constructing a usable query is
425 ' too much hassle. So, we'll do it the unix way...
426 '
427 if Shell("dir /B """ & DosSlashes(strPath) & "\" & DosSlashes(strPattern) & """", True) = 0 _
428 And InStr(1, g_strShellOutput, Chr(13)) > 1 _
429 then
430 ' return the first word.
431 LogFindFile = Left(g_strShellOutput, InStr(1, g_strShellOutput, Chr(13)) - 1)
432 else
433 LogPrint "Testing '" & strPath & "': " & strPattern & " not found"
434 LogFindFile = ""
435 end if
436end function
437
438
439''
440' Initializes the config file.
441sub CfgInit
442 FileDelete g_strCfgFile
443 CfgPrint "# -*- Makefile -*-"
444 CfgPrint "#"
445 CfgPrint "# Build configuration generated by " & GetCommandline()
446 CfgPrint "#"
447 if g_blnInternalMode = False then
448 CfgPrint "VBOX_OSE := 1"
449 end if
450end sub
451
452
453''
454' Prints a string to the config file.
455sub CfgPrint(str)
456 FileAppendLine g_strCfgFile, str
457end sub
458
459
460''
461' Initializes the environment batch script.
462sub EnvInit
463 FileDelete g_strEnvFile
464 EnvPrint "@echo off"
465 EnvPrint "rem"
466 EnvPrint "rem Environment setup script generated by " & GetCommandline()
467 EnvPrint "rem"
468end sub
469
470
471''
472' Prints a string to the environment batch script.
473sub EnvPrint(str)
474 FileAppendLine g_strEnvFile, str
475end sub
476
477
478''
479' No COM
480sub DisableCOM(strReason)
481 if g_blnDisableCOM = False then
482 LogPrint "Disabled COM components: " & strReason
483 g_blnDisableCOM = True
484 g_strDisableCOM = strReason
485 CfgPrint "VBOX_WITH_MAIN="
486 CfgPrint "VBOX_WITH_QTGUI="
487 CfgPrint "VBOX_WITH_VBOXSDL="
488 CfgPrint "VBOX_WITH_DEBUGGER_GUI="
489 CfgPrint "VBOX_WITHOUT_COM=1"
490 end if
491end sub
492
493
494''
495' Checks the the path doesn't contain characters the tools cannot deal with.
496sub CheckSourcePath
497 dim sPwd
498
499 sPwd = PathAbs(g_strPath)
500 if InStr(1, sPwd, " ") > 0 then
501 MsgError "Source path contains spaces! Please move it. (" & sPwd & ")"
502 end if
503 if InStr(1, sPwd, "$") > 0 then
504 MsgError "Source path contains the '$' char! Please move it. (" & sPwd & ")"
505 end if
506 if InStr(1, sPwd, "%") > 0 then
507 MsgError "Source path contains the '%' char! Please move it. (" & sPwd & ")"
508 end if
509 if InStr(1, sPwd, Chr(10)) > 0 _
510 Or InStr(1, sPwd, Chr(13)) > 0 _
511 Or InStr(1, sPwd, Chr(9)) > 0 _
512 then
513 MsgError "Source path contains control characters! Please move it. (" & sPwd & ")"
514 end if
515 Print "Source path: OK"
516end sub
517
518
519''
520' Checks for kBuild - very simple :)
521sub CheckForkBuild(strOptkBuild)
522 PrintHdr "kBuild"
523
524 '
525 ' Check if there is a 'kmk' in the path somewhere without
526 ' any PATH_KBUILD* stuff around.
527 '
528 blnNeedEnvVars = True
529 g_strPathkBuild = strOptkBuild
530 g_strPathkBuildBin = ""
531 if (g_strPathkBuild = "") _
532 And (EnvGet("PATH_KBUILD") = "") _
533 And (EnvGet("PATH_KBUILD_BIN") = "") _
534 And (Shell("kmk.exe --version", True) = 0) _
535 And (InStr(1,g_strShellOutput, "kBuild Make 0.1") > 0) _
536 And (InStr(1,g_strShellOutput, "PATH_KBUILD") > 0) _
537 And (InStr(1,g_strShellOutput, "PATH_KBUILD_BIN") > 0) then
538 '' @todo Need to parse out the PATH_KBUILD and PATH_KBUILD_BIN values to complete the other tests.
539 'blnNeedEnvVars = False
540 MsgWarning "You've installed kBuild it seems. configure.vbs hasn't been updated to " _
541 & "deal with that yet and will use the one it ships with. Sorry."
542 end if
543
544 '
545 ' Check for the PATH_KBUILD env.var. and fall back on root/kBuild otherwise.
546 '
547 if g_strPathkBuild = "" then
548 g_strPathkBuild = EnvGet("PATH_KBUILD")
549 if (g_strPathkBuild <> "") and (FileExists(g_strPathkBuild & "/footer.kmk") = False) then
550 MsgWarning "Ignoring incorrect kBuild path (PATH_KBUILD=" & g_strPathkBuild & ")"
551 g_strPathkBuild = ""
552 end if
553
554 if g_strPathkBuild = "" then
555 g_strPathkBuild = g_strPath & "/kBuild"
556 end if
557 end if
558
559 g_strPathkBuild = UnixSlashes(PathAbs(g_strPathkBuild))
560
561 '
562 ' Determin the location of the kBuild binaries.
563 '
564 if g_strPathkBuildBin = "" then
565 dim str2
566 if EnvGet("PROCESSOR_ARCHITECTURE") = "x86" then
567 g_strPathkBuildBin = g_strPathkBuild & "/bin/win.x86"
568 else ' boldly assumes there is only x86 and amd64.
569 g_strPathkBuildBin = g_strPathkBuild & "/bin/win.amd64"
570 if FileExists(g_strPathkBuild & "/kmk.exe") = False then
571 g_strPathkBuildBin = g_strPathkBuild & "/bin/win.x86"
572 end if
573 end if
574 if FileExists(g_strPathkBuild & "/kmk.exe") = False then
575 g_strPathkBuildBin = g_strPathkBuild & "/bin/win.x86"
576 end if
577 end if
578
579 '
580 ' Perform basic validations of the kBuild installation.
581 '
582 if (FileExists(g_strPathkBuild & "/footer.kmk") = False) _
583 Or (FileExists(g_strPathkBuild & "/header.kmk") = False) _
584 Or (FileExists(g_strPathkBuild & "/rules.kmk") = False) then
585 MsgFatal "Can't find valid kBuild at '" & g_strPathkBuild & "'. Either there is an " _
586 & "incorrect PATH_KBUILD in the environment or the checkout didn't succeed."
587 exit sub
588 end if
589 if (FileExists(g_strPathkBuildBin & "/kmk.exe") = False) _
590 Or (FileExists(g_strPathkBuildBin & "/kmk_ash.exe") = False) then
591 MsgFatal "Can't find valid kBuild binaries at '" & g_strPathkBuildBin & "'. Either there is an " _
592 & "incorrect PATH_KBUILD in the environment or the checkout didn't succeed."
593 exit sub
594 end if
595
596 if (Shell(DosSlashes(g_strPathkBuildBin & "/kmk.exe") & " --version", True) <> 0) Then
597 MsgFatal "Can't execute '" & g_strPathkBuildBin & "/kmk.exe --version'. check configure.log for the out."
598 exit sub
599 end if
600
601 '
602 ' Check for env.vars that kBuild uses.
603 '
604 str = EnvGet("BUILD_TYPE")
605 if (str <> "") _
606 And (InStr(1, "|release|debug|profile|kprofile", str) <= 0) then
607 EnvPrint "set BUILD_TYPE=release"
608 EnvSet "BUILD_TYPE", "release"
609 MsgWarning "Found unknown BUILD_TYPE value '" & str &"' in your environment. Setting it to 'release'."
610 end if
611
612 str = EnvGet("BUILD_TARGET")
613 if (str <> "") _
614 And (InStr(1, "win|win32|win64", str) <= 0) then '' @todo later only 'win' will be valid. remember to fix this check!
615 EnvPrint "set BUILD_TARGET=win"
616 EnvSet "BUILD_TARGET", "win"
617 MsgWarning "Found unknown BUILD_TARGET value '" & str &"' in your environment. Setting it to 'win32'."
618 end if
619
620 str = EnvGet("BUILD_TARGET_ARCH")
621 if (str <> "") _
622 And (InStr(1, "x86|amd64", str) <= 0) then
623 EnvPrint "set BUILD_TARGET_ARCH=x86"
624 EnvSet "BUILD_TARGET_ARCH", "x86"
625 MsgWarning "Found unknown BUILD_TARGET_ARCH value '" & str &"' in your environment. Setting it to 'x86'."
626 end if
627
628 str = EnvGet("BUILD_TARGET_CPU")
629 ' perhaps a bit pedantic this since this isn't clearly define nor used much...
630 if (str <> "") _
631 And (InStr(1, "i386|i486|i686|i786|i868|k5|k6|k7|k8", str) <= 0) then
632 EnvPrint "set BUILD_TARGET_CPU=i386"
633 EnvSet "BUILD_TARGET_CPU", "i386"
634 MsgWarning "Found unknown BUILD_TARGET_CPU value '" & str &"' in your environment. Setting it to 'i386'."
635 end if
636
637 str = EnvGet("BUILD_PLATFORM")
638 if (str <> "") _
639 And (InStr(1, "win|win32|win64", str) <= 0) then '' @todo later only 'win' will be valid. remember to fix this check!
640 EnvPrint "set BUILD_PLATFORM=win"
641 EnvSet "BUILD_PLATFORM", "win"
642 MsgWarning "Found unknown BUILD_PLATFORM value '" & str &"' in your environment. Setting it to 'win32'."
643 end if
644
645 str = EnvGet("BUILD_PLATFORM_ARCH")
646 if (str <> "") _
647 And (InStr(1, "x86|amd64", str) <= 0) then
648 EnvPrint "set BUILD_PLATFORM_ARCH=x86"
649 EnvSet "BUILD_PLATFORM_ARCH", "x86"
650 MsgWarning "Found unknown BUILD_PLATFORM_ARCH value '" & str &"' in your environment. Setting it to 'x86'."
651 end if
652
653 str = EnvGet("BUILD_PLATFORM_CPU")
654 ' perhaps a bit pedantic this since this isn't clearly define nor used much...
655 if (str <> "") _
656 And (InStr(1, "i386|i486|i686|i786|i868|k5|k6|k7|k8", str) <= 0) then
657 EnvPrint "set BUILD_PLATFORM_CPU=i386"
658 EnvSet "BUILD_PLATFORM_CPU", "i386"
659 MsgWarning "Found unknown BUILD_PLATFORM_CPU value '" & str &"' in your environment. Setting it to 'i386'."
660 end if
661
662 '
663 ' If PATH_DEV is set, check that it's pointing to something useful.
664 '
665 str = EnvGet("PATH_DEV")
666 g_strPathDev = str
667 if (str <> "") _
668 And False then '' @todo add some proper tests here.
669 strNew = UnixSlashes(g_strPath & "/tools")
670 EnvPrint "set PATH_DEV=" & strNew
671 EnvSet "PATH_DEV", strNew
672 MsgWarning "Found PATH_DEV='" & str &"' in your environment. Setting it to '" & strNew & "'."
673 g_strPathDev = strNew
674 end if
675 if g_strPathDev = "" then g_strPathDev = UnixSlashes(g_strPath & "/tools")
676
677 '
678 ' Write PATH_KBUILD to the environment script if necessary.
679 '
680 if blnNeedEnvVars = True then
681 EnvPrint "set PATH_KBUILD=" & g_strPathkBuild
682 EnvSet "PATH_KBUILD", g_strPathkBuild
683 EnvPrint "set PATH=" & g_strPathkBuildBin & ";%PATH%"
684 EnvPrepend "PATH", g_strPathkBuildBin & ";"
685 end if
686
687 PrintResult "kBuild", g_strPathkBuild
688 PrintResult "kBuild binaries", g_strPathkBuildBin
689end sub
690
691
692''
693' Checks for Visual C++ version 7 or 8.
694sub CheckForVisualCPP(strOptVC, strOptVCCommon, blnOptVCExpressEdition)
695 dim strPathVC, strPathVCCommon, str, str2, blnNeedMsPDB
696 PrintHdr "Visual C++"
697
698 '
699 ' Try find it...
700 '
701 strPathVC = ""
702 strPathVCCommon = ""
703 if (strPathVC = "") And (strOptVC <> "") then
704 if CheckForVisualCPPSub(strOptVC, strOptVCCommon, blnOptVCExpressEdition) then
705 strPathVC = strOptVC
706 strPathVCCommon = strOptVCCommon
707 end if
708 end if
709
710 if strPathVC = "" Then
711 strPathVC = g_strPathDev & "/win.x86/vcc/v8"
712 if CheckForVisualCPPSub(strPathVC, "", blnOptVCExpressEdition) = False then
713 strPathVC = g_strPathDev & "/win.x86/vcc/v7"
714 if CheckForVisualCPPSub(strPathVC, "", blnOptVCExpressEdition) = False then
715 strPathVC = ""
716 end if
717 end if
718 end if
719
720 if (strPathVC = "") _
721 And (Shell("cl.exe", True) = 0) then
722 str = Which("cl.exe")
723 if FileExists(PathStripFilename(strClExe) & "/build.exe") then
724 ' don't know how to deal with this cl.
725 Warning "Ignoring DDK cl.exe (" & str & ")."
726 else
727 strPathVC = PathParent(PathStripFilename(str))
728 strPathVCCommon = PathParent(strPathVC) & "/Common7"
729 end if
730 end if
731
732 if strPathVC = "" then
733 str = RegGetString("HKLM\SOFTWARE\Microsoft\VisualStudio\8.0\Setup\VS\ProductDir")
734 str2 = RegGetString("HKLM\SOFTWARE\Microsoft\VisualStudio\8.0\Setup\VS\EnvironmentDirectory")
735 if str <> "" And str2 <> "" Then
736 str = str & "VC"
737 str2 = PathParent(str2)
738 if CheckForVisualCPPSub(str, str2, blnOptVCExpressEdition) then
739 strPathVC = str
740 strPathVCCommon = str2
741 end if
742 end if
743 end if
744
745 if strPathVC = "" then
746 '' @todo check what this really looks like on 7.1
747 str = RegGetString("HKLM\SOFTWARE\Microsoft\VisualStudio\7.1\Setup\VS\ProductDir")
748 str2 = RegGetString("HKLM\SOFTWARE\Microsoft\VisualStudio\7.1\Setup\VS\EnvironmentDirectory")
749 if str <> "" And str2 <> "" Then
750 str = str & "VC7"
751 str2 = PathParent(str2)
752 if CheckForVisualCPPSub(str, str2, blnOptVCExpressEdition) then
753 strPathVC = str
754 strPathVCCommon = str2
755 end if
756 end if
757 end if
758
759 if strPathVC = "" then
760 str = RegGetString("HKLM\SOFTWARE\Microsoft\VisualStudio\7.0\Setup\VS\ProductDir")
761 str2 = RegGetString("HKLM\SOFTWARE\Microsoft\VisualStudio\7.0\Setup\VS\EnvironmentDirectory")
762 if str <> "" And str2 <> "" Then
763 str = str & "VC7"
764 str2 = PathParent(str2)
765 if CheckForVisualCPPSub(str, str2, blnOptVCExpressEdition) then
766 strPathVC = str
767 strPathVCCommon = str2
768 end if
769 end if
770 end if
771
772 if strPathVC = "" then
773 str = RegGetString("HKLM\SOFTWARE\Microsoft\VisualStudio\SxS\VC7\8.0")
774 if str <> "" then
775 str2 = PathParent(str) & "/Common7"
776 if CheckForVisualCPPSub(str, str2, blnOptVCExpressEdition) then
777 strPathVC = str
778 strPathVCCommon = str2
779 end if
780 end if
781 end if
782
783 ' finally check for the express edition.
784 if strPathVC = "" then
785 str = RegGetString("HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Microsoft Visual C++ 2005 Express Edition - ENU\InstallLocation")
786 if str <> "" then
787 str2 = str & "Common7"
788 str = str & "VC/"
789 if CheckForVisualCPPSub(str, str2, blnOptVCExpressEdition) then
790 strPathVC = str
791 strPathVCCommon = str2
792 end if
793 end if
794 end if
795
796 if strPathVC = "" then
797 MsgError "Cannot find cl.exe (Visual C++) anywhere on your system. Check the build requirements."
798 exit sub
799 end if
800
801 '
802 ' Clean up the path and determin the VC directory.
803 '
804 strPathVC = UnixSlashes(PathAbs(strPathVC))
805 g_strPathVCC = strPathVC
806
807 '
808 ' Check the version.
809 ' We'll have to make sure mspdbXX.dll is somewhere in the PATH.
810 '
811 if (strPathVCCommon <> "") Then
812 EnvAppend "PATH", ";" & strPathVCCommon & "/IDE"
813 end if
814 if Shell(DosSlashes(strPathVC & "/bin/cl.exe"), True) <> 0 then
815 MsgError "Executing '" & strClExe & "' (which we believe to be the Visual C++ compiler driver) failed."
816 exit sub
817 end if
818
819 if (InStr(1, g_strShellOutput, "Version 13.10") <= 0) _
820 And (InStr(1, g_strShellOutput, "Version 14.") <= 0) then
821 MsgError "The Visual C++ compiler we found ('" & strPathVC & "') isn't 7.1 or 8.0. Check the build requirements."
822 exit sub
823 end if
824
825 '
826 ' Ok, emit build config variables.
827 '
828 if InStr(1, g_strShellOutput, "Version 14.") > 0 then
829 CfgPrint "VBOX_USE_VCC80 := 1"
830 CfgPrint "PATH_TOOL_VCC80 := " & g_strPathVCC
831 CfgPrint "PATH_TOOL_VCC80X86 = $(PATH_TOOL_VCC80)"
832 CfgPrint "PATH_TOOL_VCC80AMD64 = $(PATH_TOOL_VCC80)"
833 if blnOptVCExpressEdition _
834 And LogFileExists(strPathVC, "atlmfc/include/atlbase.h") = False _
835 then
836 CfgPrint "TOOL_VCC80X86_MT = $(PATH_SDK_WINPSDK)/Bin/mt.exe"
837 CfgPrint "TOOL_VCC80AMD64_MT = $(TOOL_VCC80X86_MT)"
838 CfgPrint "VBOX_WITHOUT_COMPILER_REDIST=1"
839 DisableCOM "No ATL"
840 PrintResult "Visual C++ v8 (or later) without ATL", g_strPathVCC
841 else
842 PrintResult "Visual C++ v8 (or later)", g_strPathVCC
843 end if
844 else
845 CfgPrint "PATH_TOOL_VCC70 := " & g_strPathVCC
846 if blnOptVCExpressEdition _
847 And LogFileExists(strPathVC, "atlmfc/include/atlbase.h") = False _
848 then
849 CfgPrint "VBOX_WITHOUT_COMPILER_REDIST=1"
850 DisableCOM "No ATL"
851 PrintResult "Visual C++ v7.1 without ATL", g_strPathVCC
852 else
853 PrintResult "Visual C++ v7.1", g_strPathVCC
854 end if
855 end if
856
857 ' and the env.bat path fix.
858 if strPathVCCommon <> "" then
859 EnvPrint "set PATH=%PATH%;" & strPathVCCommon & "/IDE;"
860 end if
861end sub
862
863''
864' Checks if the specified path points to a usable PSDK.
865function CheckForVisualCPPSub(strPathVC, strPathVCCommon, blnOptVCExpressEdition)
866 strPathVC = UnixSlashes(PathAbs(strPathVC))
867 CheckForVisualCPPSub = False
868 LogPrint "trying: strPathVC=" & strPathVC & " strPathVCCommon=" & strPathVCCommon & " blnOptVCExpressEdition=" & blnOptVCExpressEdition
869 if LogFileExists(strPathVC, "bin/cl.exe") _
870 And LogFileExists(strPathVC, "bin/link.exe") _
871 And LogFileExists(strPathVC, "include/string.h") _
872 And LogFileExists(strPathVC, "lib/libcmt.lib") _
873 And LogFileExists(strPathVC, "lib/msvcrt.lib") _
874 then
875 if blnOptVCExpressEdition _
876 Or ( LogFileExists(strPathVC, "atlmfc/include/atlbase.h") _
877 And LogFileExists(strPathVC, "atlmfc/lib/atls.lib")) _
878 Then
879 '' @todo figure out a way we can verify the version/build!
880 CheckForVisualCPPSub = True
881 end if
882 end if
883end function
884
885
886''
887' Checks for a platform SDK that works with the compiler
888sub CheckForPlatformSDK(strOptSDK)
889 dim strPathPSDK, str
890 PrintHdr "Windows Platform SDK (recent)"
891
892 strPathPSDK = ""
893
894 ' Check the supplied argument first.
895 str = strOptSDK
896 if str <> "" then
897 if CheckForPlatformSDKSub(str) then strPathPSDK = str
898 end if
899
900 ' The tools location.
901 if strPathPSDK = "" then
902 str = g_strPathDev & "/win.x86/sdk/200604"
903 if CheckForPlatformSDKSub(str) then strPathPSDK = str
904 end if
905
906 if strPathPSDK = "" then
907 str = g_strPathDev & "/win.x86/sdk/200504"
908 if CheckForPlatformSDKSub(str) then strPathPSDK = str
909 end if
910
911 if strPathPSDK = "" then
912 str = g_strPathDev & "/win.x86/sdk/200209"
913 if CheckForPlatformSDKSub(str) then strPathPSDK = str
914 end if
915
916 ' Look for it in the environment
917 str = EnvGet("MSSdk")
918 if (strPathPSDK = "") And (str <> "") then
919 if CheckForPlatformSDKSub(str) then strPathPSDK = str
920 end if
921
922 str = EnvGet("Mstools")
923 if (strPathPSDK = "") And (str <> "") then
924 if CheckForPlatformSDKSub(str) then strPathPSDK = str
925 end if
926
927 ' Check if there is one installed with the compiler.
928 if (strPathPSDK = "") And (str <> "") then
929 str = g_strPathVCC & "/PlatformSDK"
930 if CheckForPlatformSDKSub(str) then strPathPSDK = str
931 end if
932
933 ' Check the registry next.
934 arrSubKeys = RegEnumSubKeys("HKLM", "SOFTWARE\Microsoft\MicrosoftSDK\InstalledSDKs")
935 for Each strSubKey In arrSubKeys
936 str = RegGetString("HKLM\SOFTWARE\Microsoft\MicrosoftSDK\InstalledSDKs\" & strSubKey & "\Install Dir")
937 if (strPathPSDK = "") And (str <> "") then
938 if CheckForPlatformSDKSub(str) then strPathPSDK = str
939 end if
940 Next
941 arrSubKeys = RegEnumSubKeys("HKCU", "SOFTWARE\Microsoft\MicrosoftSDK\InstalledSDKs")
942 for Each strSubKey In arrSubKeys
943 str = RegGetString("HKCU\SOFTWARE\Microsoft\MicrosoftSDK\InstalledSDKs\" & strSubKey & "\Install Dir")
944 if (strPathPSDK = "") And (str <> "") then
945 if CheckForPlatformSDKSub(str) then strPathPSDK = str
946 end if
947 Next
948
949 ' Give up.
950 if strPathPSDK = "" then
951 MsgError "Cannot find a suitable Platform SDK. Check configure.log and the build requirements."
952 exit sub
953 end if
954
955 '
956 ' Emit the config.
957 '
958 strPathPSDK = UnixSlashes(PathAbs(strPathPSDK))
959 CfgPrint "PATH_SDK_WINPSDK := " & strPathPSDK
960 CfgPrint "PATH_SDK_WINPSDKINCS = $(PATH_SDK_WINPSDK)"
961 CfgPrint "PATH_SDK_WIN32SDK = $(PATH_SDK_WINPSDK)"
962 CfgPrint "PATH_SDK_WIN64SDK = $(PATH_SDK_WINPSDK)"
963
964 PrintResult "Windows Platform SDK", strPathPSDK
965 g_strPathPSDK = strPathPSDK
966end sub
967
968''
969' Checks if the specified path points to a usable PSDK.
970function CheckForPlatformSDKSub(strPathPSDK)
971 CheckForPlatformSDKSub = False
972 LogPrint "trying: strPathPSDK=" & strPathPSDK
973 if LogFileExists(strPathPSDK, "include/Windows.h") _
974 And LogFileExists(strPathPSDK, "lib/Kernel32.Lib") _
975 And LogFileExists(strPathPSDK, "lib/User32.Lib") _
976 then
977 CheckForPlatformSDKSub = True
978 end if
979end function
980
981
982''
983' Checks for a Windows 2003 DDK that works with the compiler intrinsics.
984sub CheckForWin2k3DDK(strOptDDK)
985 dim strPathDDK, str, strSubKeys
986 PrintHdr "Windows 2003 DDK, build 3790 or later"
987
988 '
989 ' Find the DDK.
990 '
991 strPathDDK = ""
992 ' The specified path.
993 if (strPathDDK = "") And (strOptDDK <> "") then
994 if CheckForWin2k3DDKSub(strOptDDK, True) then strPathDDK = strOptDDK
995 end if
996
997 ' The tools location.
998 if strPathDDK = "" then
999 str = g_strPathDev & "/win.x86/ddkwin2k3/200503"
1000 if CheckForWin2k3DDKSub(str, False) then strPathDDK = str
1001 end if
1002
1003 if strPathDDK = "" then
1004 str = g_strPathDev & "/win.x86/ddkwin2k3/2004"
1005 if CheckForWin2k3DDKSub(str, False) then strPathDDK = str
1006 end if
1007
1008 if strPathDDK = "" then
1009 MsgError "Cannot find a suitable Windows 2003 DDK. Check configure.log and the build requirements."
1010 exit sub
1011 end if
1012
1013 ' Check the environment
1014 str = EnvGet("DDK_INC_PATH")
1015 if (strPathDDK = "") And (str <> "") then
1016 str = PathParent(PathParent(str))
1017 if CheckForWin2k3DDKSub(str, True) then strPathDDK = str
1018 end if
1019
1020 str = EnvGet("BASEDIR")
1021 if (strPathDDK = "") And (str <> "") then
1022 if CheckForWin2k3DDKSub(str, True) then strPathDDK = str
1023 end if
1024
1025 ' Check the registry next.
1026 arrSubKeys = RegEnumSubKeys("HKLM", "SOFTWARE\Microsoft\WINDDK") '' @todo Need some sorting stuff here.
1027 for Each strSubKey In arrSubKeys
1028 str = RegGetString("HKLM\SOFTWARE\Microsoft\WINDDK\" & strSubKey & "\SFNDirectory")
1029 if (strPathDDK = "") And (str <> "") then
1030 if CheckForWin2k3DDKSub(str, False) then strPathDDK = str
1031 end if
1032 Next
1033 arrSubKeys = RegEnumSubKeys("HKCU", "SOFTWARE\Microsoft\WINDDK") '' @todo Need some sorting stuff here.
1034 for Each strSubKey In arrSubKeys
1035 str = RegGetString("HKCU\SOFTWARE\Microsoft\WINDDK\" & strSubKey & "\SFNDirectory")
1036 if (strPathDDK = "") And (str <> "") then
1037 if CheckForWin2k3DDKSub(str, False) then strPathDDK = str
1038 end if
1039 Next
1040
1041 '
1042 ' Emit the config.
1043 '
1044 strPathDDK = UnixSlashes(PathAbs(strPathDDK))
1045 CfgPrint "PATH_SDK_W2K3DDK := " & strPathDDK
1046 CfgPrint "PATH_SDK_W2K3DDKX86 = $(PATH_SDK_W2K3DDK)"
1047 CfgPrint "PATH_SDK_W2K3DDKAMD64 = $(PATH_SDK_W2K3DDK)"
1048
1049 PrintResult "Windows 2003 DDK", strPathDDK
1050 g_strPathDDK = strPathDDK
1051end sub
1052
1053'' Quick check if the DDK is in the specified directory or not.
1054function CheckForWin2k3DDKSub(strPathDDK, blnCheckBuild)
1055 CheckForWin2k3DDKSub = False
1056 LogPrint "trying: strPathDDK=" & strPathDDK & " blnCheckBuild=" & blnCheckBuild
1057 if LogFileExists(strPathDDK, "inc/ddk/wnet/ntdef.h") _
1058 And LogFileExists(strPathDDK, "lib/wnet/i386/int64.lib") _
1059 then
1060 '' @todo figure out a way we can verify the version/build!
1061 CheckForWin2k3DDKSub = True
1062 end if
1063end function
1064
1065
1066''
1067' Finds midl.exe
1068sub CheckForMidl()
1069 dim strMidl
1070 PrintHdr "Midl.exe"
1071
1072 ' Skip if no COM/ATL.
1073 if g_blnDisableCOM then
1074 PrintResult "Xerces", "Skipped (" & g_strDisableCOM & ")"
1075 exit sub
1076 end if
1077
1078 if LogFileExists(g_strPathPSDK, "bin/Midl.exe") then
1079 strMidl = g_strPathPSDK & "/bin/Midl.exe"
1080 elseif LogFileExists(g_strPathVCC, "Common7/Tools/Bin/Midl.exe") then
1081 strMidl = g_strPathVCC & "/Common7/Tools/Bin/Midl.exe"
1082 elseif LogFileExists(g_strPathDDK, "bin/x86/Midl.exe") then
1083 strMidl = g_strPathDDK & "/bin/x86/Midl.exe"
1084 elseif LogFileExists(g_strPathDDK, "bin/Midl.exe") then
1085 strMidl = g_strPathDDK & "/bin/Midl.exe"
1086 elseif LogFileExists(g_strPathDev, "win.x86/bin/Midl.exe") then
1087 strMidl = g_strPathDev & "/win.x86/bin/Midl.exe"
1088 else
1089 MsgWarning "Midl.exe not found!"
1090 exit sub
1091 end if
1092
1093 CfgPrint "MAIN_IDL = " & strMidl
1094 PrintResult "Midl.exe", strMidl
1095end sub
1096
1097
1098''
1099' Checks for a recent DirectX SDK.
1100sub CheckForDirectXSDK(strOptDXSDK)
1101 dim strPathDXSDK, str, arrSubKeys, arrSubKeys2, strKey, strKey2
1102 PrintHdr "Direct X SDK"
1103
1104 '
1105 ' Find the DX SDK.
1106 '
1107 strPathDXSDK = ""
1108 ' The specified path.
1109 if (strPathDXSDK = "") And (strOptDXSDK <> "") then
1110 if CheckForDirectXSDKSub(strOptDXSDK) then strPathDXSDK = strOptDXSDK
1111 end if
1112
1113 ' The tools location.
1114 if strPathDXSDK = "" then
1115 str = g_strPathDev & "/win.x86/dxsdk/200610"
1116 if CheckForDirectXSDKSub(str) then strPathDXSDK = str
1117 end if
1118
1119 ' Check the installer registry (sucks a bit).
1120 arrSubKeys = RegEnumSubKeys("HKLM", "SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData")
1121 for Each strSubKey In arrSubKeys
1122 strKey = "SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\" & strSubKey & "\Products"
1123 arrSubKeys2 = RegEnumSubKeys("HKLM", strKey)
1124 for Each strSubKey2 In arrSubKeys2
1125 strKey2 = "HKLM\" & strKey & "\" & strSubKey2 & "\InstallProperties"
1126 str = RegGetString(strKey2 & "\DisplayName")
1127 if InStr(1, str, "Microsoft DirectX SDK") > 0 then
1128 str = RegGetString(strKey2 & "\InstallLocation")
1129 if (str <> "") And (strPathDXSDK = "") then
1130 if CheckForDirectXSDKSub(str) then
1131 strPathDXSDK = str
1132 Exit For
1133 end if
1134 end if
1135 end if
1136 Next
1137 Next
1138
1139 if strPathDXSDK = "" then
1140 MsgError "Cannot find a suitable Direct X SDK. Check configure.log and the build requirements."
1141 exit sub
1142 end if
1143
1144 '
1145 ' Emit the config.
1146 '
1147 strPathDXSDK = UnixSlashes(PathAbs(strPathDXSDK))
1148 CfgPrint "PATH_SDK_DXSDK := " & strPathDXSDK
1149 CfgPrint "PATH_SDK_DXSDKX86 = $(PATH_SDK_DXSDK)"
1150 CfgPrint "PATH_SDK_DXSDKAMD64 = $(PATH_SDK_DXSDK)"
1151
1152 PrintResult "Direct X SDK", strPathDXSDK
1153end sub
1154
1155'' Quick check if the DXSDK is in the specified directory or not.
1156function CheckForDirectXSDKSub(strPathDXSDK)
1157 CheckForDirectXSDKSub = False
1158 LogPrint "trying: strPathDXSDK=" & strPathDXSDK
1159 if LogFileExists(strPathDXSDK, "Lib/x86/dxguid.lib") _
1160 then
1161 '' @todo figure out a way we can verify the version/build!
1162 CheckForDirectXSDKSub = True
1163 end if
1164end function
1165
1166
1167''
1168' Checks for a MingW32 suitable for building the recompiler.
1169'
1170' strOptW32API is currently ignored.
1171'
1172sub CheckForMingW(strOptMingw, strOptW32API)
1173 dim strPathMingW, strPathW32API, str
1174 PrintHdr "MinGW GCC v3.3.x + Binutils + Runtime + W32API"
1175
1176 '
1177 ' Find the MinGW and W32API tools.
1178 '
1179 strPathMingW = ""
1180 strPathW32API = ""
1181
1182 ' The specified path.
1183 if (strPathMingW = "") And (strOptMingW <> "") then
1184 if CheckForMingWSub(strOptMingW, strOptW32API) then
1185 strPathMingW = strOptMingW
1186 strPathW32API = strOptW32API
1187 end if
1188 end if
1189
1190 ' The tools location.
1191 if strPathMingW = "" then
1192 str = g_strPathDev & "/win.x86/mingw32/v3.3.3"
1193 str2 = g_strPathDev & "/win.x86/w32api/v2.5"
1194 if CheckForMingWSub(str, str2) then
1195 strPathMingW = str
1196 strPathW32API = str2
1197 end if
1198 end if
1199
1200 ' See if there is any gcc around.
1201 if strPathMingW = "" then
1202 str = Which("mingw32-gcc.exe")
1203 if (str <> "") then
1204 str = PathParent(PathStripFilename(str))
1205 if CheckForMingWSub(str, str) then strPathMingW = str
1206 end if
1207 end if
1208
1209 if strPathMingW = "" then
1210 str = Which("gcc.exe")
1211 if (str <> "") then
1212 str = PathParent(PathStripFilename(str))
1213 if CheckForMingWSub(str, str) then strPathMingW = str
1214 end if
1215 end if
1216
1217 ' Success?
1218 if strPathMingW = "" then
1219 if strOptMingw = "" then
1220 MsgError "Can't locate a suitable MinGW installation. Try specify the path with " _
1221 & "the --with-MinGW=<path> argument. If still no luck, consult the configure.log and the build requirements."
1222 else
1223 MsgError "Can't locate a suitable MinGW installation. Please consult the configure.log and the build requirements."
1224 end if
1225 exit sub
1226 end if
1227
1228 '
1229 ' Emit the config.
1230 '
1231 strPathMingW = UnixSlashes(PathAbs(strPathMingW))
1232 CfgPrint "PATH_TOOL_MINGW32 := " & strPathMingW
1233 PrintResult "MinGW (GCC v" & g_strSubOutput & ")", strPathMingW
1234 if (strPathMingW = strPathW32API) Or strPathW32API = "" then
1235 CfgPrint "PATH_SDK_W32API = $(PATH_TOOL_MINGW32)"
1236 else
1237 CfgPrint "PATH_SDK_W32API = " & strPathW32API
1238 PrintResult "W32API", strPathW32API
1239 end if
1240end sub
1241
1242''
1243' Checks if the specified path points to an usable MinGW or not.
1244function CheckForMingWSub(strPathMingW, strPathW32API)
1245 g_strSubOutput = ""
1246 if strPathW32API = "" then strPathW32API = strPathMingW
1247 LogPrint "trying: strPathMingW=" &strPathMingW & " strPathW32API=" & strPathW32API
1248
1249 if LogFileExists(strPathMingW, "bin/mingw32-gcc.exe") _
1250 And LogFileExists(strPathMingW, "bin/ld.exe") _
1251 And LogFileExists(strPathMingW, "bin/objdump.exe") _
1252 And LogFileExists(strPathMingW, "bin/dllwrap.exe") _
1253 And LogFileExists(strPathMingW, "bin/as.exe") _
1254 And LogFileExists(strPathMingW, "include/string.h") _
1255 And LogFileExists(strPathMingW, "include/_mingw.h") _
1256 And LogFileExists(strPathMingW, "lib/dllcrt1.o") _
1257 And LogFileExists(strPathMingW, "lib/dllcrt2.o") _
1258 And LogFileExists(strPathMingW, "lib/libmsvcrt.a") _
1259 _
1260 And LogFileExists(strPathW32API, "lib/libkernel32.a") _
1261 And LogFileExists(strPathW32API, "include/windows.h") _
1262 then
1263 if Shell(DosSlashes(strPathMingW & "/bin/gcc.exe") & " --version", True) = 0 then
1264 dim offVer, iMajor, iMinor, iPatch, strVer
1265
1266 ' extract the version.
1267 strVer = ""
1268 offVer = InStr(1, g_strShellOutput, "(GCC) ")
1269 if offVer > 0 then
1270 strVer = LTrim(Mid(g_strShellOutput, offVer + Len("(GCC) ")))
1271 strVer = RTrim(Left(strVer, InStr(1, strVer, " ")))
1272 if (Mid(strVer, 2, 1) = ".") _
1273 And (Mid(strVer, 4, 1) = ".") then
1274 iMajor = Int(Left(strVer, 1)) ' Is Int() the right thing here? I want atoi()!!!
1275 iMinor = Int(Mid(strVer, 3, 1))
1276 iPatch = Int(Mid(strVer, 5))
1277 else
1278 LogPrint "Malformed version: '" & strVer & "'"
1279 strVer = ""
1280 end if
1281 end if
1282 if strVer <> "" then
1283 if (iMajor = 3) And (iMinor = 3) then
1284 CheckForMingWSub = True
1285 g_strSubOutput = strVer
1286 else
1287 LogPrint "MinGW version '" & iMajor & "." & iMinor & "." & iPatch & "' is not supported (or configure.vbs failed to parse it correctly)."
1288 end if
1289 else
1290 LogPrint "Couldn't locate the GCC version in the output!"
1291 end if
1292
1293 else
1294 LogPrint "Failed to run gcc.exe!"
1295 end if
1296 end if
1297end function
1298
1299
1300''
1301' Checks for any libSDL binaries.
1302sub CheckForlibSDL(strOptlibSDL)
1303 dim strPathlibSDL, str
1304 PrintHdr "libSDL"
1305
1306 '
1307 ' Try find some SDL library.
1308 '
1309
1310 ' First, the specific location.
1311 strPathlibSDL = ""
1312 if (strPathlibSDL = "") And (strOptlibSDL <> "") then
1313 if CheckForlibSDLSub(strOptlibSDL) then strPathlibSDL = strOptlibSDL
1314 end if
1315
1316 ' The tools location.
1317 if strPathlibSDL = "" Then
1318 str = g_strPathDev & "/win.x86/libsdl/v1.2.11"
1319 if CheckForlibSDLSub(str) then strPathlibSDL = str
1320 end if
1321
1322 if strPathlibSDL = "" Then
1323 str = g_strPathDev & "/win.x86/libsdl/v1.2.7-InnoTek"
1324 if CheckForlibSDLSub(str) then strPathlibSDL = str
1325 end if
1326
1327 ' Poke about in the path.
1328 str = Which("SDLmain.lib")
1329 if (strPathlibSDL = "") And (str <> "") Then
1330 str = PathParent(PathStripFilename(str))
1331 if CheckForlibSDLSub(str) then strPathlibSDL = str
1332 end if
1333
1334 str = Which("SDL.dll")
1335 if (strPathlibSDL = "") And (str <> "") Then
1336 str = PathParent(PathStripFilename(str))
1337 if CheckForlibSDLSub(str) then strPathlibSDL = str
1338 end if
1339
1340 ' Success?
1341 if strPathlibSDL = "" then
1342 if strOptlibSDL = "" then
1343 MsgError "Can't locate libSDL. Try specify the path with the --with-libSDL=<path> argument. " _
1344 & "If still no luck, consult the configure.log and the build requirements."
1345 else
1346 MsgError "Can't locate libSDL. Please consult the configure.log and the build requirements."
1347 end if
1348 exit sub
1349 end if
1350
1351 strPathLibSDL = UnixSlashes(PathAbs(strPathLibSDL))
1352 CfgPrint "PATH_SDK_LIBSDL := " & strPathlibSDL
1353
1354 PrintResult "libSDL", strPathlibSDL
1355end sub
1356
1357''
1358' Checks if the specified path points to an usable libSDL or not.
1359function CheckForlibSDLSub(strPathlibSDL)
1360 CheckForlibSDLSub = False
1361 LogPrint "trying: strPathlibSDL=" & strPathlibSDL
1362 if LogFileExists(strPathlibSDL, "lib/SDL.lib") _
1363 And LogFileExists(strPathlibSDL, "lib/SDLmain.lib") _
1364 And LogFileExists(strPathlibSDL, "lib/SDL.dll") _
1365 And LogFileExists(strPathlibSDL, "include/SDL.h") _
1366 And LogFileExists(strPathlibSDL, "include/SDL_syswm.h") _
1367 And LogFileExists(strPathlibSDL, "include/SDL_version.h") _
1368 then
1369 CheckForlibSDLSub = True
1370 end if
1371end function
1372
1373
1374dim g_strXercesVer
1375g_strXercesVer = ""
1376
1377''
1378' Checks for xerces.
1379sub CheckForXerces(strOptXerces)
1380 dim strPathXerces, str
1381 PrintHdr "Xerces"
1382
1383 ' Skip if no COM/ATL.
1384 if g_blnDisableCOM then
1385 PrintResult "Xerces", "Skipped (" & g_strDisableCOM & ")"
1386 exit sub
1387 end if
1388
1389 '
1390 ' Try find some xerces dll/lib.
1391 '
1392 strPathXerces = ""
1393 if (strPathXerces = "") And (strOptXerces <> "") then
1394 if CheckForXercesSub(strOptXerces) then strPathXerces = strOptXerces
1395 end if
1396
1397 if strPathXerces = "" Then
1398 str = Which("xerces-c_2_9.lib")
1399 if str = "" then str = Which("xerces-c_2_8.lib")
1400 if str = "" then str = Which("xerces-c_2_7.lib")
1401 if str = "" then str = Which("xerces-c_2_6.lib")
1402 if str <> "" Then
1403 str = PathParent(PathStripFilename(str))
1404 if CheckForXercesSub(str) then strPathXerces = str
1405 end if
1406 end if
1407
1408 if strPathXerces = "" Then
1409 str = Which("xerces-c_2_9.dll")
1410 if str = "" then str = Which("xerces-c_2_8.dll")
1411 if str = "" then str = Which("xerces-c_2_7.dll")
1412 if str = "" then str = Which("xerces-c_2_6.dll")
1413 if str <> "" Then
1414 str = PathParent(PathStripFilename(str))
1415 if CheckForXercesSub(str) then strPathXerces = str
1416 end if
1417 end if
1418
1419 ' Ignore failure if we're in 'internal' mode.
1420 if (strPathXerces = "") and g_blnInternalMode then
1421 PrintResult "Xerces", "ignored (internal mode)"
1422 exit sub
1423 end if
1424
1425 ' Success?
1426 if strPathXerces = "" then
1427 if strOptXerces = "" then
1428 MsgError "Can't locate Xerces. Try specify the path with the --with-xerces=<path> argument. " _
1429 & "If still no luck, consult the configure.log and the build requirements."
1430 else
1431 MsgError "Can't locate Xerces. Please consult the configure.log and the build requirements."
1432 end if
1433 exit sub
1434 end if
1435
1436 strPathXerces = UnixSlashes(PathAbs(strPathXerces))
1437 CfgPrint "SDK_VBOX_XERCES_INCS := " & strPathXerces & "/include"
1438 CfgPrint "SDK_VBOX_XERCES_LIBS := " & strPathXerces & "/lib/xerces-c_" & Left(g_strXercesVer, 1) & ".lib"
1439 CfgPrint "DLL_SDK_VBOX_XERCES_XERCES := " & strPathXerces & "/bin/xerces-c_" & g_strXercesVer & ".dll"
1440
1441 PrintResult "Xerces", strPathXerces
1442end sub
1443
1444''
1445' Checks if the specified path points to an usable libSDL or not.
1446function CheckForXercesSub(strPathXerces)
1447 dim str
1448
1449 CheckForXercersSub = False
1450 LogPrint "trying: strPathXerces=" & strPathXerces
1451 if LogFileExists(strPathXerces, "include/xercesc/dom/DOM.hpp") _
1452 And LogFileExists(strPathXerces, "include/xercesc/validators/datatype/DatatypeValidator.hpp") _
1453 then
1454 ' The version is encoded in the dll/lib name, so try first
1455 ' to find the dll and then a matching lib.
1456 str = LogFindFile(strPathXerces, "bin/xerces-c_*.dll")
1457 if str <> "" then
1458 g_strXercesVer = Mid(str, Len("xerces-c_") + 1, Len(str) - Len("xerces-c_.dll"))
1459 ' the library omits the minor version (in the current distro).
1460 if LogFileExists(strPathXerces, "lib/xerces-c_" & Left(g_strXercesVer, 1) & ".lib") then
1461 CheckForXercesSub = True
1462 end if
1463 end if
1464 end if
1465end function
1466
1467
1468dim g_strXalanVer
1469g_strXalanVer = ""
1470
1471''
1472' Checks for Xalan.
1473sub CheckForXalan(strOptXalan)
1474 dim strPathXalan, str
1475 PrintHdr "Xalan"
1476
1477 ' Skip if no COM/ATL.
1478 if g_blnDisableCOM then
1479 PrintResult "Xalan", "Skipped (" & g_strDisableCOM & ")"
1480 exit sub
1481 end if
1482
1483 '
1484 ' Try find some Xalan dll/lib.
1485 '
1486 strPathXalan = ""
1487 if (strPathXalan = "") And (strOptXalan <> "") then
1488 if CheckForXalanSub(strOptXalan) then strPathXalan = strOptXalan
1489 end if
1490
1491 if strPathXalan = "" Then
1492 str = Which("Xalan-c_1_12.lib")
1493 if str = "" then str = Which("Xalan-c_1_11.lib")
1494 if str = "" then str = Which("Xalan-c_1_10.lib")
1495 if str = "" then str = Which("Xalan-c_1_9.lib")
1496 if str <> "" Then
1497 str = PathParent(PathStripFilename(str))
1498 if CheckForXalanSub(str) then strPathXalan = str
1499 end if
1500 end if
1501
1502 if strPathXalan = "" Then
1503 str = Which("Xalan-c_1_12.dll")
1504 if str = "" then str = Which("Xalan-c_1_11.dll")
1505 if str = "" then str = Which("Xalan-c_1_10.dll")
1506 if str = "" then str = Which("Xalan-c_1_9.dll")
1507 if str <> "" Then
1508 str = PathParent(PathStripFilename(str))
1509 if CheckForXalanSub(str) then strPathXalan = str
1510 end if
1511 end if
1512
1513 ' Ignore failure if we're in 'internal' mode.
1514 if (strPathXalan = "") and g_blnInternalMode then
1515 PrintResult "Xalan", "ignored (internal mode)"
1516 exit sub
1517 end if
1518
1519 ' Success?
1520 if strPathXalan = "" then
1521 if strOptXalan = "" then
1522 MsgError "Can't locate Xalan. Try specify the path with the --with-Xalan=<path> argument. " _
1523 & "If still no luck, consult the configure.log and the build requirements."
1524 else
1525 MsgError "Can't locate Xalan. Please consult the configure.log and the build requirements."
1526 end if
1527 exit sub
1528 end if
1529
1530 strPathXalan = UnixSlashes(PathAbs(strPathXalan))
1531 CfgPrint "SDK_VBOX_XALAN_INCS := " & strPathXalan & "/include"
1532 CfgPrint "SDK_VBOX_XALAN_LIBS := " & strPathXalan & "/lib/Xalan-C_" & Left(g_strXalanVer, 1) & ".lib"
1533 CfgPrint "DLL_SDK_VBOX_XALAN_XALAN := " & strPathXalan & "/bin/Xalan-C_" & g_strXalanVer & ".dll"
1534 CfgPrint "DLL_SDK_VBOX_XALAN_XALAN-MESSAGES := " & strPathXalan & "/bin/XalanMessages_" & g_strXalanVer & ".dll"
1535
1536 PrintResult "Xalan", strPathXalan
1537end sub
1538
1539''
1540' Checks if the specified path points to an usable Xalan or not.
1541function CheckForXalanSub(strPathXalan)
1542 dim str
1543
1544 CheckForXercersSub = False
1545 LogPrint "trying: strPathXalan=" & strPathXalan
1546
1547 if LogFileExists(strPathXalan, "include/xalanc/DOMSupport/DOMSupport.hpp") _
1548 And LogFileExists(strPathXalan, "include/xalanc/XalanDOM/XalanText.hpp") _
1549 then
1550 ' The version is encoded in the dll/lib name, so try first
1551 ' to find the dll and then a matching lib.
1552 str = LogFindFile(strPathXalan, "bin/Xalan-C_*.dll")
1553 if str <> "" then
1554 g_strXalanVer = Mid(str, Len("Xalan-C_") + 1, Len(str) - Len("Xalan-C_.dll"))
1555 ' the library omits the minor version (in the current distro).
1556 if LogFileExists(strPathXalan, "bin/XalanMessages_" & g_strXalanVer & ".dll") _
1557 And LogFileExists(strPathXalan, "lib/Xalan-C_" & Left(g_strXalanVer, 1) & ".lib") _
1558 then
1559 CheckForXalanSub = True
1560 end if
1561 end if
1562 end if
1563end function
1564
1565
1566dim g_strQtVer
1567g_strQtVer = ""
1568
1569''
1570' Checks for any Qt binaries. Failure here isn't fatal.
1571sub CheckForQt(strOptQt)
1572 dim strPathQt, str
1573
1574 PrintHdr "Qt"
1575
1576 '
1577 ' Try find the Qt installation.
1578 '
1579 strPathQt = ""
1580
1581 if (strPathQt = "") And (strOptQt <> "") then
1582 if CheckForQtSub(strOptQt) then strPathQt = strOptQt
1583 end if
1584
1585 if strPathQt = "" then
1586 str = g_strPathDev & "/win.x86/qt/v3.3.3"
1587 if CheckForQtSub(str) then strPathQt = str
1588 end if
1589
1590 '' @todo check for Qt installations and stuff later.
1591
1592 ' Found anything?
1593 if strPathQt = "" then
1594 CfgPrint "VBOX_WITH_QTGUI="
1595 PrintResult "Qt", "not found"
1596 else
1597 CfgPrint "VBOX_PATH_QT := " & strPathQt
1598 CfgPrint "QTDIR = $(VBOX_PATH_QT)"
1599 CfgPrint "LIB_QT = $(VBOX_PATH_QT)/lib/dynamic/qt-mt" & g_strQtVer & ".lib"
1600 CfgPrint "VBOX_DLL_QT = $(VBOX_PATH_QT)/bin/qt-mt" & g_strQtVer & ".dll"
1601 PrintResult "Qt (" & g_strQtVer & ")", strPathQt
1602 end if
1603end sub
1604
1605''
1606' Checks if the specified path points to an usable Qt install or not.
1607function CheckForQtSub(strPathQt)
1608
1609 CheckForQtSub = False
1610 LogPrint "trying: strPathQt=" & strPathQt
1611 if LogFileExists(strPathQt, "bin/moc.exe") _
1612 And LogFileExists(strPathQt, "bin/uic.exe") _
1613 And LogFileExists(strPathQt, "include/qvbox.h") _
1614 And LogFileExists(strPathQt, "include/qt_windows.h") _
1615 And LogFileExists(strPathQt, "include/qapplication.h") _
1616 And LogFileExists(strPathQt, "include/qtextedit.h") _
1617 And LogFileExists(strPathQt, "lib/dynamic/qtmain.lib") _
1618 then
1619 dim str
1620
1621 ' This check might need improving.
1622 str = LogFindFile(strPathQt, "lib/dynamic/qt-mt33*.lib")
1623 if str <> "" then
1624 g_strQtVer = Mid(str, Len("qt-mt") + 1, Len(str) - Len("qt-mt.lib"))
1625 if LogFileExists(strPathQt, "bin/qt-mt" & g_strQtVer & ".dll") then
1626 CheckForQtSub = True
1627 end if
1628 end if
1629 end if
1630end function
1631
1632
1633''
1634' Show usage.
1635sub usage
1636 Print "Usage: cscript configure.vbs [options]"
1637 Print ""
1638 Print "Configuration:"
1639 Print " -h, --help"
1640 Print " --internal"
1641 Print ""
1642 Print "Components:"
1643 Print " --disable-COM"
1644 Print ""
1645 Print "Locations:"
1646 Print " --with-DDK=PATH "
1647 Print " --with-DXSDK=PATH "
1648 Print " --with-kBuild=PATH "
1649 Print " --with-libSDL=PATH "
1650 Print " --with-MinGW=PATH "
1651 Print " --with-Qt3=PATH "
1652 Print " --with-SDK=PATH "
1653 Print " --with-VC=PATH "
1654 Print " --with-VC-Common=PATH "
1655 Print " --with-VC-Express-Edition"
1656 Print " --with-W32API=PATH "
1657 Print " --with-Xalan=PATH "
1658 Print " --with-Xerces=PATH "
1659end sub
1660
1661''
1662' The main() like function.
1663'
1664Sub Main
1665 '
1666 ' Write the log header and check that we're not using wscript.
1667 '
1668 LogInit
1669 If UCase(Right(Wscript.FullName, 11)) = "WSCRIPT.EXE" Then
1670 Wscript.Echo "This script must be run under CScript."
1671 Wscript.Quit(1)
1672 End If
1673
1674 '
1675 ' Parse arguments.
1676 '
1677 strOptDDK = ""
1678 strOptDXDDK = ""
1679 strOptkBuild = ""
1680 strOptlibSDL = ""
1681 strOptMingW = ""
1682 strOptQt = ""
1683 strOptSDK = ""
1684 strOptVC = ""
1685 strOptVCCommon = ""
1686 blnOptVCExpressEdition = False
1687 strOptW32API = ""
1688 blnOptXalan = ""
1689 blnOptXerces = ""
1690 blnOptDisableCOM = False
1691 for i = 1 to Wscript.Arguments.Count
1692 dim str, strArg, strPath
1693
1694 ' Separate argument and path value
1695 str = Wscript.Arguments.item(i - 1)
1696 if InStr(1, str, "=") > 0 then
1697 strArg = Mid(str, 1, InStr(1, str, "=") - 1)
1698 strPath = Mid(str, InStr(1, str, "=") + 1)
1699 if strPath = "" then MsgFatal "Syntax error! Argument #" & i & " is missing the path."
1700 else
1701 strArg = str
1702 strPath = ""
1703 end if
1704
1705 ' Process the argument
1706 select case LCase(strArg)
1707 case "--with-ddk"
1708 strOptDDK = strPath
1709 case "--with-dxsdk"
1710 strOptDXSDK = strPath
1711 case "--with-kbuild"
1712 strOptkBuild = strPath
1713 case "--with-libsdl"
1714 strOptlibSDL = strPath
1715 case "--with-mingw"
1716 strOptMingW = strPath
1717 case "--with-qt"
1718 strOptQt = strPath
1719 case "--with-sdk"
1720 strOptSDK = strPath
1721 case "--with-vc"
1722 strOptVC = strPath
1723 case "--with-vc-common"
1724 strOptVCCommon = strPath
1725 case "--with-vc-express-edition"
1726 blnOptVCExpressEdition = True
1727 case "--with-w32api"
1728 strOptW32API = strPath
1729 case "--with-xalan"
1730 strOptXalan = strPath
1731 case "--with-xerces"
1732 strOptXerces = strPath
1733 case "--disable-com"
1734 blnOptDisableCOM = True
1735 case "--enable-com"
1736 blnOptDisableCOM = False
1737 case "--internal"
1738 g_blnInternalMode = True
1739 case "-h", "--help", "-?"
1740 usage
1741 Wscript.Quit(0)
1742 case else
1743 Wscript.echo "syntax error: Unknown option '" & str &"'."
1744 usage
1745 Wscript.Quit(1)
1746 end select
1747 next
1748
1749 '
1750 ' Initialize output files.
1751 '
1752 CfgInit
1753 EnvInit
1754
1755 '
1756 ' Check that the Shell function is sane.
1757 '
1758 g_objShell.Environment("PROCESS")("TESTING_ENVIRONMENT_INHERITANCE") = "This works"
1759 if Shell("set TESTING_ENVIRONMENT_INHERITANC", False) <> 0 then ' The 'E' is missing on purpose (4nt).
1760 MsgFatal "shell execution test failed!"
1761 end if
1762 if g_strShellOutput <> "TESTING_ENVIRONMENT_INHERITANCE=This works" & CHR(13) & CHR(10) then
1763 MsgFatal "shell inheritance or shell execution isn't working right."
1764 end if
1765 g_objShell.Environment("PROCESS")("TESTING_ENVIRONMENT_INHERITANCE") = ""
1766 Print "Shell inheritance test: OK"
1767
1768 '
1769 ' Do the checks.
1770 '
1771 if blnOptDisableCOM = True then
1772 DisableCOM "--disable-com"
1773 end if
1774 CheckSourcePath
1775 CheckForkBuild strOptkBuild
1776 CheckForVisualCPP strOptVC, strOptVCCommon, blnOptVCExpressEdition
1777 CheckForPlatformSDK strOptSDK
1778 CheckForWin2k3DDK strOptDDK
1779 CheckForMidl
1780 CheckForDirectXSDK strOptDXSDK
1781 CheckForMingW strOptMingw, strOptW32API
1782 CheckForlibSDL strOptlibSDL
1783 CheckForXerces strOptXerces
1784 CheckForXalan strOptXalan
1785 CheckForQt strOptQt
1786 if g_blnInternalMode then
1787 EnvPrint "call " & g_strPathDev & "/env.cmd %1 %2 %3 %4 %5 %6 %7 %8 %9"
1788 end if
1789
1790End Sub
1791
1792
1793Main
1794
Note: See TracBrowser for help on using the repository browser.

© 2024 Oracle Support Privacy / Do Not Sell My Info Terms of Use Trademark Policy Automated Access Etiquette