configure.vbs@ 4953

Last change on this file since 4953 was 4746, checked in by vboxsync, 17 years ago
file header and eol-style.
Property svn:eol-style set to `CRLF` Property svn:keywords set to `Id`
File size: 55.9 KB

Line
1	' $Id: configure.vbs 4746 2007-09-13 06:43:53Z vboxsync $
2	'' @file
3	' The purpose of this script is to check for all external tools, headers, and
4	' libraries VBox OSE depends on.
5	'
6	' The script generates the build configuration file 'AutoConfig.kmk' and the
7	' environment setup script 'env.bat'. A log of what has been done is
8	' written to 'configure.log'.
9	'
10
11	'
12	' Copyright (C) 2006-2007 innotek GmbH
13	'
14	' This file is part of VirtualBox Open Source Edition (OSE), as
15	' available from http://www.virtualbox.org. This file is free software;
16	' you can redistribute it and/or modify it under the terms of the GNU
17	' General Public License as published by the Free Software Foundation,
18	' in version 2 as it comes in the "COPYING" file of the VirtualBox OSE
19	' distribution. VirtualBox OSE is distributed in the hope that it will
20	' be useful, but WITHOUT ANY WARRANTY of any kind.
21	'
22
23
24	'*****************************************************************************
25	'* Global Variables *
26	'*****************************************************************************
27	dim g_strPath, g_strEnvFile, g_strLogFile, g_strCfgFile, g_strShellOutput
28	g_strPath = Left(Wscript.ScriptFullName, Len(Wscript.ScriptFullName) - Len("\configure.vbs"))
29	g_strEnvFile = g_strPath & "\env.bat"
30	g_strCfgFile = g_strPath & "\AutoConfig.kmk"
31	g_strLogFile = g_strPath & "\configure.log"
32	'g_strTmpFile = g_strPath & "\configure.tmp"
33
34	dim g_objShell, g_objFileSys
35	Set g_objShell = WScript.CreateObject("WScript.Shell")
36	Set g_objFileSys = WScript.CreateObject("Scripting.FileSystemObject")
37
38	dim g_strPathkBuild, g_strPathkBuildBin, g_strPathDev, g_strPathVCC, g_strPathPSDK, g_strSubOutput
39	g_strPathkBuild = ""
40	g_strPathDev = ""
41	g_strPathVCC = ""
42	g_strPathPSDK = ""
43
44	dim g_blnDisableCOM, g_strDisableCOM
45	g_blnDisableCOM = False
46	g_strDisableCOM = ""
47
48	' The internal mode is primarily for skipping the xerces and xalan monsters.
49	dim g_blnInternalMode
50	g_blnInternalMode = False
51
52
53
54	''
55	' Converts to unix slashes
56	function UnixSlashes(str)
57	UnixSlashes = replace(str, "\", "/")
58	end function
59
60
61	''
62	' Converts to dos slashes
63	function DosSlashes(str)
64	DosSlashes = replace(str, "/", "\")
65	end function
66
67
68	''
69	' Read a file (typically the tmp file) into a string.
70	function FileToString(strFilename)
71	const ForReading = 1, TristateFalse = 0
72	dim objLogFile, str
73
74	set objFile = g_objFileSys.OpenTextFile(DosSlashes(strFilename), ForReading, False, TristateFalse)
75	str = objFile.ReadAll()
76	objFile.Close()
77
78	FileToString = str
79	end function
80
81
82	''
83	' Deletes a file
84	sub FileDelete(strFilename)
85	if g_objFileSys.FileExists(DosSlashes(strFilename)) then
86	g_objFileSys.DeleteFile(DosSlashes(strFilename))
87	end if
88	end sub
89
90
91	''
92	' Appends a line to an ascii file.
93	sub FileAppendLine(strFilename, str)
94	const ForAppending = 8, TristateFalse = 0
95	dim objFile
96
97	set objFile = g_objFileSys.OpenTextFile(DosSlashes(strFilename), ForAppending, True, TristateFalse)
98	objFile.WriteLine(str)
99	objFile.Close()
100	end sub
101
102
103	''
104	' Checks if the file exists.
105	function FileExists(strFilename)
106	FileExists = g_objFileSys.FileExists(DosSlashes(strFilename))
107	end function
108
109
110	''
111	' Checks if the directory exists.
112	function DirExists(strDirectory)
113	DirExists = g_objFileSys.FolderExists(DosSlashes(strDirectory))
114	end function
115
116	''
117	' Gets a value from the registry. Returns "" if string wasn't found / valid.
118	function RegGetString(strName)
119	RegGetString = ""
120	On Error Resume Next
121	RegGetString = g_objShell.RegRead(strName)
122	end function
123
124	''
125	' Returns an array of subkey strings.
126	function RegEnumSubKeys(strRoot, strKeyPath)
127	const HKEY_LOCAL_MACHINE = &H80000002
128	const HKEY_CURRENT_USER = &H80000001
129	dim objReg, iRoot
130	set objReg = GetObject("winmgmts:{impersonationLevel=impersonate}!\\.\root\default:StdRegProv")
131
132	select case strRoot
133	case "HKLM"
134	iRoot = HKEY_LOCAL_MACHINE
135	case "HKCU"
136	iRoot = HKEY_CURRENT_USER
137	case else
138	MsgFatal "RegEnumSubKeys: Unknown root: " & strRoot
139	end select
140
141	On Error Resume Next
142	rc = objReg.EnumKey(iRoot, strKeyPath, arrSubKeys)
143	if rc = 0 then
144	RegEnumSubKeys = arrSubKeys
145	else
146	RegEnumSubKeys = Array()
147	end if
148	end function
149
150
151	''
152	' Gets the commandline used to invoke the script.
153	function GetCommandline()
154	dim str, i
155
156	'' @todo find an api for querying it instead of reconstructing it like this...
157	GetCommandline = "cscript configure.vbs"
158	for i = 1 to WScript.Arguments.Count
159	str = WScript.Arguments.Item(i - 1)
160	if str = "" then
161	str = """"""
162	elseif (InStr(1, str, " ")) then
163	str = """" & str & """"
164	end if
165	GetCommandline = GetCommandline & " " & str
166	next
167	end function
168
169
170	''
171	' Gets an environment variable.
172	function EnvGet(strName)
173	EnvGet = g_objShell.Environment("PROCESS")(strName)
174	end function
175
176
177	''
178	' Sets an environment variable.
179	sub EnvSet(strName, strValue)
180	g_objShell.Environment("PROCESS")(strName) = strValue
181	LogPrint "EnvSet: " & strName & "=" & strValue
182	end sub
183
184
185	''
186	' Appends a string to an environment variable
187	sub EnvAppend(strName, strValue)
188	dim str
189	str = g_objShell.Environment("PROCESS")(strName)
190	g_objShell.Environment("PROCESS")(strName) = str & strValue
191	LogPrint "EnvAppend: " & strName & "=" & str & strValue
192	end sub
193
194
195	''
196	' Prepends a string to an environment variable
197	sub EnvPrepend(strName, strValue)
198	dim str
199	str = g_objShell.Environment("PROCESS")(strName)
200	g_objShell.Environment("PROCESS")(strName) = strValue & str
201	LogPrint "EnvPrepend: " & strName & "=" & strValue & str
202	end sub
203
204
205	''
206	' Get the path of the parent directory. Returns root if root was specified.
207	' Expects abs path.
208	function PathParent(str)
209	PathParent = g_objFileSys.GetParentFolderName(DosSlashes(str))
210	end function
211
212
213	''
214	' Strips the filename from at path.
215	function PathStripFilename(str)
216	PathStripFilename = g_objFileSys.GetParentFolderName(DosSlashes(str))
217	end function
218
219
220	''
221	' Get the abs path, use the short version if necessary.
222	function PathAbs(str)
223	PathAbs = g_objFileSys.GetAbsolutePathName(DosSlashes(str))
224	if (InStr(1, PathAbs, " ") > 0) _
225	Or (InStr(1, PathAbs, "&") > 0) _
226	Or (InStr(1, PathAbs, "$") > 0) _
227	then
228	if FileExists(PathAbs) then
229	dim objFile
230	set objFile = g_objFileSys.GetFile(PathAbs)
231	PathAbs = objFile.ShortPath
232	elseif DirExists(PathAbs) then
233	dim objFolder
234	set objFolder = g_objFileSys.GetFolder(PathAbs)
235	PathAbs = objFolder.ShortPath
236	else
237	' ignore non-existing paths.
238	end if
239	end if
240
241
242	if (FileExists(PathAbs) Or DirExists(PathAbs)) _
243	And ( (InStr(1, PathAbs, " ") > 0) _
244	Or (InStr(1, PathAbs, "&") > 0) _
245	Or (InStr(1, PathAbs, "$") > 0)) _
246	then
247	MsgFatal "PathAbs(" & str & ") attempted to return filename with problematic " _
248	& "characters in it (" & PathAbs & "). The tool/sdk referenced will probably " _
249	& "need to be copied or reinstalled to a location without 'spaces', '$', ';' " _
250	& "or '&' in the path name. (Unless it's a problem with this script of course...)"
251	end if
252	end function
253
254
255	''
256	' Executes a command in the shell catching output in g_strShellOutput
257	function Shell(strCommand, blnBoth)
258	dim strShell, strCmdline, objExec, str
259
260	strShell = g_objShell.ExpandEnvironmentStrings("%ComSpec%")
261	if blnBoth = true then
262	strCmdline = strShell & " /c " & strCommand & " 2>&1"
263	else
264	strCmdline = strShell & " /c " & strCommand & " 2>nul"
265	end if
266
267	LogPrint "# Shell: " & strCmdline
268	Set objExec = g_objShell.Exec(strCmdLine)
269	g_strShellOutput = objExec.StdOut.ReadAll()
270	objExec.StdErr.ReadAll()
271	do while objExec.Status = 0
272	Wscript.Sleep 20
273	g_strShellOutput = g_strShellOutput & objExec.StdOut.ReadAll()
274	objExec.StdErr.ReadAll()
275	loop
276
277	LogPrint "# Status: " & objExec.ExitCode
278	LogPrint "# Start of Output"
279	LogPrint g_strShellOutput
280	LogPrint "# End of Output"
281
282	Shell = objExec.ExitCode
283	end function
284
285
286	''
287	' Try find the specified file in the path.
288	function Which(strFile)
289	dim strPath, iStart, iEnd, str
290
291	' the path
292	strPath = EnvGet("Path")
293	iStart = 1
294	do while iStart <= Len(strPath)
295	iEnd = InStr(iStart, strPath, ";")
296	if iEnd <= 0 then iEnd = Len(strPath) + 1
297	if iEnd > iStart then
298	str = Mid(strPath, iStart, iEnd - iStart) & "/" & strFile
299	if FileExists(str) then
300	Which = str
301	exit function
302	end if
303	end if
304	iStart = iEnd + 1
305	loop
306
307	' registry or somewhere?
308
309	Which = ""
310	end function
311
312
313	''
314	' Append text to the log file and echo it to stdout
315	sub Print(str)
316	LogPrint str
317	Wscript.Echo str
318	end sub
319
320
321	''
322	' Prints a test header
323	sub PrintHdr(strTest)
324	LogPrint "*** Checking for " & strTest & " ***"
325	Wscript.Echo "Checking for " & StrTest & "..."
326	end sub
327
328
329	''
330	' Prints a success message
331	sub PrintResult(strTest, strResult)
332	LogPrint "** " & strTest & ": " & strResult
333	Wscript.Echo " Found "& strTest & ": " & strResult
334	end sub
335
336
337	''
338	' Warning message.
339	sub MsgWarning(strMsg)
340	Print "warning: " & strMsg
341	end sub
342
343
344	''
345	' Fatal error.
346	sub MsgFatal(strMsg)
347	Print "fatal error: " & strMsg
348	Wscript.Quit
349	end sub
350
351
352	''
353	' Error message, fatal unless flag to ignore errors is given.
354	sub MsgError(strMsg)
355	Print "error: " & strMsg
356	if g_blnInternalMode = False then
357	Wscript.Quit
358	end if
359	end sub
360
361
362	''
363	' Write a log header with some basic info.
364	sub LogInit
365	FileDelete g_strLogFile
366	LogPrint "# Log file generated by " & Wscript.ScriptFullName
367	for i = 1 to WScript.Arguments.Count
368	LogPrint "# Arg #" & i & ": " & WScript.Arguments.Item(i - 1)
369	next
370	if Wscript.Arguments.Count = 0 then
371	LogPrint "# No arguments given"
372	end if
373	LogPrint "# Reconstructed command line: " & GetCommandline()
374
375	' some Wscript stuff
376	LogPrint "# Wscript properties:"
377	LogPrint "# ScriptName: " & Wscript.ScriptName
378	LogPrint "# Version: " & Wscript.Version
379	LogPrint "# Build: " & Wscript.BuildVersion
380	LogPrint "# Name: " & Wscript.Name
381	LogPrint "# Full Name: " & Wscript.FullName
382	LogPrint "# Path: " & Wscript.Path
383	LogPrint "#"
384
385
386	' the environment
387	LogPrint "# Environment:"
388	dim objEnv
389	for each strVar in g_objShell.Environment("PROCESS")
390	LogPrint "# " & strVar
391	next
392	LogPrint "#"
393	end sub
394
395
396	''
397	' Append text to the log file.
398	sub LogPrint(str)
399	FileAppendLine g_strLogFile, str
400	'Wscript.Echo "dbg: " & str
401	end sub
402
403
404	''
405	' Checks if the file exists and logs failures.
406	function LogFileExists(strPath, strFilename)
407	LogFileExists = FileExists(strPath & "/" & strFilename)
408	if LogFileExists = False then
409	LogPrint "Testing '" & strPath & "': " & strFilename & " not found"
410	end if
411
412	end function
413
414
415	''
416	' Finds the first file matching the pattern.
417	' If no file is found, log the failure.
418	function LogFindFile(strPath, strPattern)
419	dim str
420
421	'
422	' Yes, there are some facy database kinda interface to the filesystem
423	' however, breaking down the path and constructing a usable query is
424	' too much hassle. So, we'll do it the unix way...
425	'
426	if Shell("dir /B """ & DosSlashes(strPath) & "\" & DosSlashes(strPattern) & """", True) = 0 _
427	And InStr(1, g_strShellOutput, Chr(13)) > 1 _
428	then
429	' return the first word.
430	LogFindFile = Left(g_strShellOutput, InStr(1, g_strShellOutput, Chr(13)) - 1)
431	else
432	LogPrint "Testing '" & strPath & "': " & strPattern & " not found"
433	LogFindFile = ""
434	end if
435	end function
436
437
438	''
439	' Initializes the config file.
440	sub CfgInit
441	FileDelete g_strCfgFile
442	CfgPrint "# -- Makefile --"
443	CfgPrint "#"
444	CfgPrint "# Build configuration generated by " & GetCommandline()
445	CfgPrint "#"
446	if g_blnInternalMode = False then
447	CfgPrint "VBOX_OSE := 1"
448	end if
449	end sub
450
451
452	''
453	' Prints a string to the config file.
454	sub CfgPrint(str)
455	FileAppendLine g_strCfgFile, str
456	end sub
457
458
459	''
460	' Initializes the environment batch script.
461	sub EnvInit
462	FileDelete g_strEnvFile
463	EnvPrint "@echo off"
464	EnvPrint "rem"
465	EnvPrint "rem Environment setup script generated by " & GetCommandline()
466	EnvPrint "rem"
467	end sub
468
469
470	''
471	' Prints a string to the environment batch script.
472	sub EnvPrint(str)
473	FileAppendLine g_strEnvFile, str
474	end sub
475
476
477	''
478	' No COM
479	sub DisableCOM(strReason)
480	if g_blnDisableCOM = False then
481	LogPrint "Disabled COM components: " & strReason
482	g_blnDisableCOM = True
483	g_strDisableCOM = strReason
484	CfgPrint "VBOX_WITH_MAIN="
485	CfgPrint "VBOX_WITH_QTGUI="
486	CfgPrint "VBOX_WITH_VBOXSDL="
487	CfgPrint "VBOX_WITH_DEBUGGER_GUI="
488	CfgPrint "VBOX_WITHOUT_COM=1"
489	end if
490	end sub
491
492
493	''
494	' Checks the the path doesn't contain characters the tools cannot deal with.
495	sub CheckSourcePath
496	dim sPwd
497
498	sPwd = PathAbs(g_strPath)
499	if InStr(1, sPwd, " ") > 0 then
500	MsgError "Source path contains spaces! Please move it. (" & sPwd & ")"
501	end if
502	if InStr(1, sPwd, "$") > 0 then
503	MsgError "Source path contains the '$' char! Please move it. (" & sPwd & ")"
504	end if
505	if InStr(1, sPwd, "%") > 0 then
506	MsgError "Source path contains the '%' char! Please move it. (" & sPwd & ")"
507	end if
508	if InStr(1, sPwd, Chr(10)) > 0 _
509	Or InStr(1, sPwd, Chr(13)) > 0 _
510	Or InStr(1, sPwd, Chr(9)) > 0 _
511	then
512	MsgError "Source path contains control characters! Please move it. (" & sPwd & ")"
513	end if
514	Print "Source path: OK"
515	end sub
516
517
518	''
519	' Checks for kBuild - very simple :)
520	sub CheckForkBuild(strOptkBuild)
521	PrintHdr "kBuild"
522
523	'
524	' Check if there is a 'kmk' in the path somewhere without
525	' any PATH_KBUILD* stuff around.
526	'
527	blnNeedEnvVars = True
528	g_strPathkBuild = strOptkBuild
529	g_strPathkBuildBin = ""
530	if (g_strPathkBuild = "") _
531	And (EnvGet("PATH_KBUILD") = "") _
532	And (EnvGet("PATH_KBUILD_BIN") = "") _
533	And (Shell("kmk.exe --version", True) = 0) _
534	And (InStr(1,g_strShellOutput, "kBuild Make 0.1") > 0) _
535	And (InStr(1,g_strShellOutput, "PATH_KBUILD") > 0) _
536	And (InStr(1,g_strShellOutput, "PATH_KBUILD_BIN") > 0) then
537	'' @todo Need to parse out the PATH_KBUILD and PATH_KBUILD_BIN values to complete the other tests.
538	'blnNeedEnvVars = False
539	MsgWarning "You've installed kBuild it seems. configure.vbs hasn't been updated to " _
540	& "deal with that yet and will use the one it ships with. Sorry."
541	end if
542
543	'
544	' Check for the PATH_KBUILD env.var. and fall back on root/kBuild otherwise.
545	'
546	if g_strPathkBuild = "" then
547	g_strPathkBuild = EnvGet("PATH_KBUILD")
548	if (g_strPathkBuild <> "") and (FileExists(g_strPathkBuild & "/footer.kmk") = False) then
549	MsgWarning "Ignoring incorrect kBuild path (PATH_KBUILD=" & g_strPathkBuild & ")"
550	g_strPathkBuild = ""
551	end if
552
553	if g_strPathkBuild = "" then
554	g_strPathkBuild = g_strPath & "/kBuild"
555	end if
556	end if
557
558	g_strPathkBuild = UnixSlashes(PathAbs(g_strPathkBuild))
559
560	'
561	' Determin the location of the kBuild binaries.
562	'
563	if g_strPathkBuildBin = "" then
564	dim str2
565	if EnvGet("PROCESSOR_ARCHITECTURE") = "x86" then
566	g_strPathkBuildBin = g_strPathkBuild & "/bin/win.x86"
567	else ' boldly assumes there is only x86 and amd64.
568	g_strPathkBuildBin = g_strPathkBuild & "/bin/win.amd64"
569	if FileExists(g_strPathkBuild & "/kmk.exe") = False then
570	g_strPathkBuildBin = g_strPathkBuild & "/bin/win.x86"
571	end if
572	end if
573	if FileExists(g_strPathkBuild & "/kmk.exe") = False then
574	g_strPathkBuildBin = g_strPathkBuild & "/bin/win.x86"
575	end if
576	end if
577
578	'
579	' Perform basic validations of the kBuild installation.
580	'
581	if (FileExists(g_strPathkBuild & "/footer.kmk") = False) _
582	Or (FileExists(g_strPathkBuild & "/header.kmk") = False) _
583	Or (FileExists(g_strPathkBuild & "/rules.kmk") = False) then
584	MsgFatal "Can't find valid kBuild at '" & g_strPathkBuild & "'. Either there is an " _
585	& "incorrect PATH_KBUILD in the environment or the checkout didn't succeed."
586	exit sub
587	end if
588	if (FileExists(g_strPathkBuildBin & "/kmk.exe") = False) _
589	Or (FileExists(g_strPathkBuildBin & "/kmk_ash.exe") = False) then
590	MsgFatal "Can't find valid kBuild binaries at '" & g_strPathkBuildBin & "'. Either there is an " _
591	& "incorrect PATH_KBUILD in the environment or the checkout didn't succeed."
592	exit sub
593	end if
594
595	if (Shell(DosSlashes(g_strPathkBuildBin & "/kmk.exe") & " --version", True) <> 0) Then
596	MsgFatal "Can't execute '" & g_strPathkBuildBin & "/kmk.exe --version'. check configure.log for the out."
597	exit sub
598	end if
599
600	'
601	' Check for env.vars that kBuild uses.
602	'
603	str = EnvGet("BUILD_TYPE")
604	if (str <> "") _
605	And (InStr(1, "\|release\|debug\|profile\|kprofile", str) <= 0) then
606	EnvPrint "set BUILD_TYPE=release"
607	EnvSet "BUILD_TYPE", "release"
608	MsgWarning "Found unknown BUILD_TYPE value '" & str &"' in your environment. Setting it to 'release'."
609	end if
610
611	str = EnvGet("BUILD_TARGET")
612	if (str <> "") _
613	And (InStr(1, "win\|win32\|win64", str) <= 0) then '' @todo later only 'win' will be valid. remember to fix this check!
614	EnvPrint "set BUILD_TARGET=win"
615	EnvSet "BUILD_TARGET", "win"
616	MsgWarning "Found unknown BUILD_TARGET value '" & str &"' in your environment. Setting it to 'win32'."
617	end if
618
619	str = EnvGet("BUILD_TARGET_ARCH")
620	if (str <> "") _
621	And (InStr(1, "x86\|amd64", str) <= 0) then
622	EnvPrint "set BUILD_TARGET_ARCH=x86"
623	EnvSet "BUILD_TARGET_ARCH", "x86"
624	MsgWarning "Found unknown BUILD_TARGET_ARCH value '" & str &"' in your environment. Setting it to 'x86'."
625	end if
626
627	str = EnvGet("BUILD_TARGET_CPU")
628	' perhaps a bit pedantic this since this isn't clearly define nor used much...
629	if (str <> "") _
630	And (InStr(1, "i386\|i486\|i686\|i786\|i868\|k5\|k6\|k7\|k8", str) <= 0) then
631	EnvPrint "set BUILD_TARGET_CPU=i386"
632	EnvSet "BUILD_TARGET_CPU", "i386"
633	MsgWarning "Found unknown BUILD_TARGET_CPU value '" & str &"' in your environment. Setting it to 'i386'."
634	end if
635
636	str = EnvGet("BUILD_PLATFORM")
637	if (str <> "") _
638	And (InStr(1, "win\|win32\|win64", str) <= 0) then '' @todo later only 'win' will be valid. remember to fix this check!
639	EnvPrint "set BUILD_PLATFORM=win"
640	EnvSet "BUILD_PLATFORM", "win"
641	MsgWarning "Found unknown BUILD_PLATFORM value '" & str &"' in your environment. Setting it to 'win32'."
642	end if
643
644	str = EnvGet("BUILD_PLATFORM_ARCH")
645	if (str <> "") _
646	And (InStr(1, "x86\|amd64", str) <= 0) then
647	EnvPrint "set BUILD_PLATFORM_ARCH=x86"
648	EnvSet "BUILD_PLATFORM_ARCH", "x86"
649	MsgWarning "Found unknown BUILD_PLATFORM_ARCH value '" & str &"' in your environment. Setting it to 'x86'."
650	end if
651
652	str = EnvGet("BUILD_PLATFORM_CPU")
653	' perhaps a bit pedantic this since this isn't clearly define nor used much...
654	if (str <> "") _
655	And (InStr(1, "i386\|i486\|i686\|i786\|i868\|k5\|k6\|k7\|k8", str) <= 0) then
656	EnvPrint "set BUILD_PLATFORM_CPU=i386"
657	EnvSet "BUILD_PLATFORM_CPU", "i386"
658	MsgWarning "Found unknown BUILD_PLATFORM_CPU value '" & str &"' in your environment. Setting it to 'i386'."
659	end if
660
661	'
662	' If PATH_DEV is set, check that it's pointing to something useful.
663	'
664	str = EnvGet("PATH_DEV")
665	g_strPathDev = str
666	if (str <> "") _
667	And False then '' @todo add some proper tests here.
668	strNew = UnixSlashes(g_strPath & "/tools")
669	EnvPrint "set PATH_DEV=" & strNew
670	EnvSet "PATH_DEV", strNew
671	MsgWarning "Found PATH_DEV='" & str &"' in your environment. Setting it to '" & strNew & "'."
672	g_strPathDev = strNew
673	end if
674	if g_strPathDev = "" then g_strPathDev = UnixSlashes(g_strPath & "/tools")
675
676	'
677	' Write PATH_KBUILD to the environment script if necessary.
678	'
679	if blnNeedEnvVars = True then
680	EnvPrint "set PATH_KBUILD=" & g_strPathkBuild
681	EnvSet "PATH_KBUILD", g_strPathkBuild
682	EnvPrint "set PATH=" & g_strPathkBuildBin & ";%PATH%"
683	EnvPrepend "PATH", g_strPathkBuildBin & ";"
684	end if
685
686	PrintResult "kBuild", g_strPathkBuild
687	PrintResult "kBuild binaries", g_strPathkBuildBin
688	end sub
689
690
691	''
692	' Checks for Visual C++ version 7 or 8.
693	sub CheckForVisualCPP(strOptVC, strOptVCCommon, blnOptVCExpressEdition)
694	dim strPathVC, strPathVCCommon, str, str2, blnNeedMsPDB
695	PrintHdr "Visual C++"
696
697	'
698	' Try find it...
699	'
700	strPathVC = ""
701	strPathVCCommon = ""
702	if (strPathVC = "") And (strOptVC <> "") then
703	if CheckForVisualCPPSub(strOptVC, strOptVCCommon, blnOptVCExpressEdition) then
704	strPathVC = strOptVC
705	strPathVCCommon = strOptVCCommon
706	end if
707	end if
708
709	if strPathVC = "" Then
710	strPathVC = g_strPathDev & "/win.x86/vcc/v8"
711	if CheckForVisualCPPSub(strPathVC, "", blnOptVCExpressEdition) = False then
712	strPathVC = g_strPathDev & "/win.x86/vcc/v7"
713	if CheckForVisualCPPSub(strPathVC, "", blnOptVCExpressEdition) = False then
714	strPathVC = ""
715	end if
716	end if
717	end if
718
719	if (strPathVC = "") _
720	And (Shell("cl.exe", True) = 0) then
721	str = Which("cl.exe")
722	if FileExists(PathStripFilename(strClExe) & "/build.exe") then
723	' don't know how to deal with this cl.
724	Warning "Ignoring DDK cl.exe (" & str & ")."
725	else
726	strPathVC = PathParent(PathStripFilename(str))
727	strPathVCCommon = PathParent(strPathVC) & "/Common7"
728	end if
729	end if
730
731	if strPathVC = "" then
732	str = RegGetString("HKLM\SOFTWARE\Microsoft\VisualStudio\8.0\Setup\VS\ProductDir")
733	str2 = RegGetString("HKLM\SOFTWARE\Microsoft\VisualStudio\8.0\Setup\VS\EnvironmentDirectory")
734	if str <> "" And str2 <> "" Then
735	str = str & "VC"
736	str2 = PathParent(str2)
737	if CheckForVisualCPPSub(str, str2, blnOptVCExpressEdition) then
738	strPathVC = str
739	strPathVCCommon = str2
740	end if
741	end if
742	end if
743
744	if strPathVC = "" then
745	'' @todo check what this really looks like on 7.1
746	str = RegGetString("HKLM\SOFTWARE\Microsoft\VisualStudio\7.1\Setup\VS\ProductDir")
747	str2 = RegGetString("HKLM\SOFTWARE\Microsoft\VisualStudio\7.1\Setup\VS\EnvironmentDirectory")
748	if str <> "" And str2 <> "" Then
749	str = str & "VC7"
750	str2 = PathParent(str2)
751	if CheckForVisualCPPSub(str, str2, blnOptVCExpressEdition) then
752	strPathVC = str
753	strPathVCCommon = str2
754	end if
755	end if
756	end if
757
758	if strPathVC = "" then
759	str = RegGetString("HKLM\SOFTWARE\Microsoft\VisualStudio\7.0\Setup\VS\ProductDir")
760	str2 = RegGetString("HKLM\SOFTWARE\Microsoft\VisualStudio\7.0\Setup\VS\EnvironmentDirectory")
761	if str <> "" And str2 <> "" Then
762	str = str & "VC7"
763	str2 = PathParent(str2)
764	if CheckForVisualCPPSub(str, str2, blnOptVCExpressEdition) then
765	strPathVC = str
766	strPathVCCommon = str2
767	end if
768	end if
769	end if
770
771	if strPathVC = "" then
772	str = RegGetString("HKLM\SOFTWARE\Microsoft\VisualStudio\SxS\VC7\8.0")
773	if str <> "" then
774	str2 = PathParent(str) & "/Common7"
775	if CheckForVisualCPPSub(str, str2, blnOptVCExpressEdition) then
776	strPathVC = str
777	strPathVCCommon = str2
778	end if
779	end if
780	end if
781
782	' finally check for the express edition.
783	if strPathVC = "" then
784	str = RegGetString("HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Microsoft Visual C++ 2005 Express Edition - ENU\InstallLocation")
785	if str <> "" then
786	str2 = str & "Common7"
787	str = str & "VC/"
788	if CheckForVisualCPPSub(str, str2, blnOptVCExpressEdition) then
789	strPathVC = str
790	strPathVCCommon = str2
791	end if
792	end if
793	end if
794
795	if strPathVC = "" then
796	MsgError "Cannot find cl.exe (Visual C++) anywhere on your system. Check the build requirements."
797	exit sub
798	end if
799
800	'
801	' Clean up the path and determin the VC directory.
802	'
803	strPathVC = UnixSlashes(PathAbs(strPathVC))
804	g_strPathVCC = strPathVC
805
806	'
807	' Check the version.
808	' We'll have to make sure mspdbXX.dll is somewhere in the PATH.
809	'
810	if (strPathVCCommon <> "") Then
811	EnvAppend "PATH", ";" & strPathVCCommon & "/IDE"
812	end if
813	if Shell(DosSlashes(strPathVC & "/bin/cl.exe"), True) <> 0 then
814	MsgError "Executing '" & strClExe & "' (which we believe to be the Visual C++ compiler driver) failed."
815	exit sub
816	end if
817
818	if (InStr(1, g_strShellOutput, "Version 13.10") <= 0) _
819	And (InStr(1, g_strShellOutput, "Version 14.") <= 0) then
820	MsgError "The Visual C++ compiler we found ('" & strPathVC & "') isn't 7.1 or 8.0. Check the build requirements."
821	exit sub
822	end if
823
824	'
825	' Ok, emit build config variables.
826	'
827	if InStr(1, g_strShellOutput, "Version 14.") > 0 then
828	CfgPrint "VBOX_USE_VCC80 := 1"
829	CfgPrint "PATH_TOOL_VCC80 := " & g_strPathVCC
830	CfgPrint "PATH_TOOL_VCC80X86 = $(PATH_TOOL_VCC80)"
831	CfgPrint "PATH_TOOL_VCC80AMD64 = $(PATH_TOOL_VCC80)"
832	if blnOptVCExpressEdition _
833	And LogFileExists(strPathVC, "atlmfc/include/atlbase.h") = False _
834	then
835	CfgPrint "TOOL_VCC80X86_MT = $(PATH_SDK_WINPSDK)/Bin/mt.exe"
836	CfgPrint "TOOL_VCC80AMD64_MT = $(TOOL_VCC80X86_MT)"
837	CfgPrint "VBOX_WITHOUT_COMPILER_REDIST=1"
838	DisableCOM "No ATL"
839	PrintResult "Visual C++ v8 (or later) without ATL", g_strPathVCC
840	else
841	PrintResult "Visual C++ v8 (or later)", g_strPathVCC
842	end if
843	else
844	CfgPrint "PATH_TOOL_VCC70 := " & g_strPathVCC
845	if blnOptVCExpressEdition _
846	And LogFileExists(strPathVC, "atlmfc/include/atlbase.h") = False _
847	then
848	CfgPrint "VBOX_WITHOUT_COMPILER_REDIST=1"
849	DisableCOM "No ATL"
850	PrintResult "Visual C++ v7.1 without ATL", g_strPathVCC
851	else
852	PrintResult "Visual C++ v7.1", g_strPathVCC
853	end if
854	end if
855
856	' and the env.bat path fix.
857	if strPathVCCommon <> "" then
858	EnvPrint "set PATH=%PATH%;" & strPathVCCommon & "/IDE;"
859	end if
860	end sub
861
862	''
863	' Checks if the specified path points to a usable PSDK.
864	function CheckForVisualCPPSub(strPathVC, strPathVCCommon, blnOptVCExpressEdition)
865	strPathVC = UnixSlashes(PathAbs(strPathVC))
866	CheckForVisualCPPSub = False
867	LogPrint "trying: strPathVC=" & strPathVC & " strPathVCCommon=" & strPathVCCommon & " blnOptVCExpressEdition=" & blnOptVCExpressEdition
868	if LogFileExists(strPathVC, "bin/cl.exe") _
869	And LogFileExists(strPathVC, "bin/link.exe") _
870	And LogFileExists(strPathVC, "include/string.h") _
871	And LogFileExists(strPathVC, "lib/libcmt.lib") _
872	And LogFileExists(strPathVC, "lib/msvcrt.lib") _
873	then
874	if blnOptVCExpressEdition _
875	Or ( LogFileExists(strPathVC, "atlmfc/include/atlbase.h") _
876	And LogFileExists(strPathVC, "atlmfc/lib/atls.lib")) _
877	Then
878	'' @todo figure out a way we can verify the version/build!
879	CheckForVisualCPPSub = True
880	end if
881	end if
882	end function
883
884
885	''
886	' Checks for a platform SDK that works with the compiler
887	sub CheckForPlatformSDK(strOptSDK)
888	dim strPathPSDK, str
889	PrintHdr "Windows Platform SDK (recent)"
890
891	strPathPSDK = ""
892
893	' Check the supplied argument first.
894	str = strOptSDK
895	if str <> "" then
896	if CheckForPlatformSDKSub(str) then strPathPSDK = str
897	end if
898
899	' The tools location.
900	if strPathPSDK = "" then
901	str = g_strPathDev & "/win.x86/sdk/200604"
902	if CheckForPlatformSDKSub(str) then strPathPSDK = str
903	end if
904
905	if strPathPSDK = "" then
906	str = g_strPathDev & "/win.x86/sdk/200504"
907	if CheckForPlatformSDKSub(str) then strPathPSDK = str
908	end if
909
910	if strPathPSDK = "" then
911	str = g_strPathDev & "/win.x86/sdk/200209"
912	if CheckForPlatformSDKSub(str) then strPathPSDK = str
913	end if
914
915	' Look for it in the environment
916	str = EnvGet("MSSdk")
917	if (strPathPSDK = "") And (str <> "") then
918	if CheckForPlatformSDKSub(str) then strPathPSDK = str
919	end if
920
921	str = EnvGet("Mstools")
922	if (strPathPSDK = "") And (str <> "") then
923	if CheckForPlatformSDKSub(str) then strPathPSDK = str
924	end if
925
926	' Check if there is one installed with the compiler.
927	if (strPathPSDK = "") And (str <> "") then
928	str = g_strPathVCC & "/PlatformSDK"
929	if CheckForPlatformSDKSub(str) then strPathPSDK = str
930	end if
931
932	' Check the registry next.
933	arrSubKeys = RegEnumSubKeys("HKLM", "SOFTWARE\Microsoft\MicrosoftSDK\InstalledSDKs")
934	for Each strSubKey In arrSubKeys
935	str = RegGetString("HKLM\SOFTWARE\Microsoft\MicrosoftSDK\InstalledSDKs\" & strSubKey & "\Install Dir")
936	if (strPathPSDK = "") And (str <> "") then
937	if CheckForPlatformSDKSub(str) then strPathPSDK = str
938	end if
939	Next
940	arrSubKeys = RegEnumSubKeys("HKCU", "SOFTWARE\Microsoft\MicrosoftSDK\InstalledSDKs")
941	for Each strSubKey In arrSubKeys
942	str = RegGetString("HKCU\SOFTWARE\Microsoft\MicrosoftSDK\InstalledSDKs\" & strSubKey & "\Install Dir")
943	if (strPathPSDK = "") And (str <> "") then
944	if CheckForPlatformSDKSub(str) then strPathPSDK = str
945	end if
946	Next
947
948	' Give up.
949	if strPathPSDK = "" then
950	MsgError "Cannot find a suitable Platform SDK. Check configure.log and the build requirements."
951	exit sub
952	end if
953
954	'
955	' Emit the config.
956	'
957	strPathPSDK = UnixSlashes(PathAbs(strPathPSDK))
958	CfgPrint "PATH_SDK_WINPSDK := " & strPathPSDK
959	CfgPrint "PATH_SDK_WINPSDKINCS = $(PATH_SDK_WINPSDK)"
960	CfgPrint "PATH_SDK_WIN32SDK = $(PATH_SDK_WINPSDK)"
961	CfgPrint "PATH_SDK_WIN64SDK = $(PATH_SDK_WINPSDK)"
962
963	PrintResult "Windows Platform SDK", strPathPSDK
964	g_strPathPSDK = strPathPSDK
965	end sub
966
967	''
968	' Checks if the specified path points to a usable PSDK.
969	function CheckForPlatformSDKSub(strPathPSDK)
970	CheckForPlatformSDKSub = False
971	LogPrint "trying: strPathPSDK=" & strPathPSDK
972	if LogFileExists(strPathPSDK, "include/Windows.h") _
973	And LogFileExists(strPathPSDK, "lib/Kernel32.Lib") _
974	And LogFileExists(strPathPSDK, "lib/User32.Lib") _
975	then
976	CheckForPlatformSDKSub = True
977	end if
978	end function
979
980
981	''
982	' Checks for a Windows 2003 DDK that works with the compiler intrinsics.
983	sub CheckForWin2k3DDK(strOptDDK)
984	dim strPathDDK, str, strSubKeys
985	PrintHdr "Windows 2003 DDK, build 3790 or later"
986
987	'
988	' Find the DDK.
989	'
990	strPathDDK = ""
991	' The specified path.
992	if (strPathDDK = "") And (strOptDDK <> "") then
993	if CheckForWin2k3DDKSub(strOptDDK, True) then strPathDDK = strOptDDK
994	end if
995
996	' The tools location.
997	if strPathDDK = "" then
998	str = g_strPathDev & "/win.x86/ddkwin2k3/200503"
999	if CheckForWin2k3DDKSub(str, False) then strPathDDK = str
1000	end if
1001
1002	if strPathDDK = "" then
1003	str = g_strPathDev & "/win.x86/ddkwin2k3/2004"
1004	if CheckForWin2k3DDKSub(str, False) then strPathDDK = str
1005	end if
1006
1007	if strPathDDK = "" then
1008	MsgError "Cannot find a suitable Windows 2003 DDK. Check configure.log and the build requirements."
1009	exit sub
1010	end if
1011
1012	' Check the environment
1013	str = EnvGet("DDK_INC_PATH")
1014	if (strPathDDK = "") And (str <> "") then
1015	str = PathParent(PathParent(str))
1016	if CheckForWin2k3DDKSub(str, True) then strPathDDK = str
1017	end if
1018
1019	str = EnvGet("BASEDIR")
1020	if (strPathDDK = "") And (str <> "") then
1021	if CheckForWin2k3DDKSub(str, True) then strPathDDK = str
1022	end if
1023
1024	' Check the registry next.
1025	arrSubKeys = RegEnumSubKeys("HKLM", "SOFTWARE\Microsoft\WINDDK") '' @todo Need some sorting stuff here.
1026	for Each strSubKey In arrSubKeys
1027	str = RegGetString("HKLM\SOFTWARE\Microsoft\WINDDK\" & strSubKey & "\SFNDirectory")
1028	if (strPathDDK = "") And (str <> "") then
1029	if CheckForWin2k3DDKSub(str, False) then strPathDDK = str
1030	end if
1031	Next
1032	arrSubKeys = RegEnumSubKeys("HKCU", "SOFTWARE\Microsoft\WINDDK") '' @todo Need some sorting stuff here.
1033	for Each strSubKey In arrSubKeys
1034	str = RegGetString("HKCU\SOFTWARE\Microsoft\WINDDK\" & strSubKey & "\SFNDirectory")
1035	if (strPathDDK = "") And (str <> "") then
1036	if CheckForWin2k3DDKSub(str, False) then strPathDDK = str
1037	end if
1038	Next
1039
1040	'
1041	' Emit the config.
1042	'
1043	strPathDDK = UnixSlashes(PathAbs(strPathDDK))
1044	CfgPrint "PATH_SDK_W2K3DDK := " & strPathDDK
1045	CfgPrint "PATH_SDK_W2K3DDKX86 = $(PATH_SDK_W2K3DDK)"
1046	CfgPrint "PATH_SDK_W2K3DDKAMD64 = $(PATH_SDK_W2K3DDK)"
1047
1048	PrintResult "Windows 2003 DDK", strPathDDK
1049	end sub
1050
1051	'' Quick check if the DDK is in the specified directory or not.
1052	function CheckForWin2k3DDKSub(strPathDDK, blnCheckBuild)
1053	CheckForWin2k3DDKSub = False
1054	LogPrint "trying: strPathDDK=" & strPathDDK & " blnCheckBuild=" & blnCheckBuild
1055	if LogFileExists(strPathDDK, "inc/ddk/wnet/ntdef.h") _
1056	And LogFileExists(strPathDDK, "lib/wnet/i386/int64.lib") _
1057	then
1058	'' @todo figure out a way we can verify the version/build!
1059	CheckForWin2k3DDKSub = True
1060	end if
1061	end function
1062
1063
1064	''
1065	' Checks for a recent DirectX SDK.
1066	sub CheckForDirectXSDK(strOptDXSDK)
1067	dim strPathDXSDK, str, arrSubKeys, arrSubKeys2, strKey, strKey2
1068	PrintHdr "Direct X SDK"
1069
1070	'
1071	' Find the DX SDK.
1072	'
1073	strPathDXSDK = ""
1074	' The specified path.
1075	if (strPathDXSDK = "") And (strOptDXSDK <> "") then
1076	if CheckForDirectXSDKSub(strOptDXSDK) then strPathDXSDK = strOptDXSDK
1077	end if
1078
1079	' The tools location.
1080	if strPathDXSDK = "" then
1081	str = g_strPathDev & "/win.x86/dxsdk/200610"
1082	if CheckForDirectXSDKSub(str) then strPathDXSDK = str
1083	end if
1084
1085	' Check the installer registry (sucks a bit).
1086	arrSubKeys = RegEnumSubKeys("HKLM", "SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData")
1087	for Each strSubKey In arrSubKeys
1088	strKey = "SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\" & strSubKey & "\Products"
1089	arrSubKeys2 = RegEnumSubKeys("HKLM", strKey)
1090	for Each strSubKey2 In arrSubKeys2
1091	strKey2 = "HKLM\" & strKey & "\" & strSubKey2 & "\InstallProperties"
1092	str = RegGetString(strKey2 & "\DisplayName")
1093	if InStr(1, str, "Microsoft DirectX SDK") > 0 then
1094	str = RegGetString(strKey2 & "\InstallLocation")
1095	if (str <> "") And (strPathDXSDK = "") then
1096	if CheckForDirectXSDKSub(str) then
1097	strPathDXSDK = str
1098	Exit For
1099	end if
1100	end if
1101	end if
1102	Next
1103	Next
1104
1105	if strPathDXSDK = "" then
1106	MsgError "Cannot find a suitable Direct X SDK. Check configure.log and the build requirements."
1107	exit sub
1108	end if
1109
1110	'
1111	' Emit the config.
1112	'
1113	strPathDXSDK = UnixSlashes(PathAbs(strPathDXSDK))
1114	CfgPrint "PATH_SDK_DXSDK := " & strPathDXSDK
1115	CfgPrint "PATH_SDK_DXSDKX86 = $(PATH_SDK_DXSDK)"
1116	CfgPrint "PATH_SDK_DXSDKAMD64 = $(PATH_SDK_DXSDK)"
1117
1118	PrintResult "Direct X SDK", strPathDXSDK
1119	end sub
1120
1121	'' Quick check if the DXSDK is in the specified directory or not.
1122	function CheckForDirectXSDKSub(strPathDXSDK)
1123	CheckForDirectXSDKSub = False
1124	LogPrint "trying: strPathDXSDK=" & strPathDXSDK
1125	if LogFileExists(strPathDXSDK, "Lib/x86/dxguid.lib") _
1126	then
1127	'' @todo figure out a way we can verify the version/build!
1128	CheckForDirectXSDKSub = True
1129	end if
1130	end function
1131
1132
1133	''
1134	' Checks for a MingW32 suitable for building the recompiler.
1135	'
1136	' strOptW32API is currently ignored.
1137	'
1138	sub CheckForMingW(strOptMingw, strOptW32API)
1139	dim strPathMingW, strPathW32API, str
1140	PrintHdr "MinGW GCC v3.3.x + Binutils + Runtime + W32API"
1141
1142	'
1143	' Find the MinGW and W32API tools.
1144	'
1145	strPathMingW = ""
1146	strPathW32API = ""
1147
1148	' The specified path.
1149	if (strPathMingW = "") And (strOptMingW <> "") then
1150	if CheckForMingWSub(strOptMingW, strOptW32API) then
1151	strPathMingW = strOptMingW
1152	strPathW32API = strOptW32API
1153	end if
1154	end if
1155
1156	' The tools location.
1157	if strPathMingW = "" then
1158	str = g_strPathDev & "/win.x86/mingw32/v3.3.3"
1159	str2 = g_strPathDev & "/win.x86/w32api/v2.5"
1160	if CheckForMingWSub(str, str2) then
1161	strPathMingW = str
1162	strPathW32API = str2
1163	end if
1164	end if
1165
1166	' See if there is any gcc around.
1167	if strPathMingW = "" then
1168	str = Which("mingw32-gcc.exe")
1169	if (str <> "") then
1170	str = PathParent(PathStripFilename(str))
1171	if CheckForMingWSub(str, str) then strPathMingW = str
1172	end if
1173	end if
1174
1175	if strPathMingW = "" then
1176	str = Which("gcc.exe")
1177	if (str <> "") then
1178	str = PathParent(PathStripFilename(str))
1179	if CheckForMingWSub(str, str) then strPathMingW = str
1180	end if
1181	end if
1182
1183	' Success?
1184	if strPathMingW = "" then
1185	if strOptMingw = "" then
1186	MsgError "Can't locate a suitable MinGW installation. Try specify the path with " _
1187	& "the --with-MinGW=<path> argument. If still no luck, consult the configure.log and the build requirements."
1188	else
1189	MsgError "Can't locate a suitable MinGW installation. Please consult the configure.log and the build requirements."
1190	end if
1191	exit sub
1192	end if
1193
1194	'
1195	' Emit the config.
1196	'
1197	strPathMingW = UnixSlashes(PathAbs(strPathMingW))
1198	CfgPrint "PATH_TOOL_MINGW32 := " & strPathMingW
1199	PrintResult "MinGW (GCC v" & g_strSubOutput & ")", strPathMingW
1200	if (strPathMingW = strPathW32API) Or strPathW32API = "" then
1201	CfgPrint "PATH_SDK_W32API = $(PATH_TOOL_MINGW32)"
1202	else
1203	CfgPrint "PATH_SDK_W32API = " & strPathW32API
1204	PrintResult "W32API", strPathW32API
1205	end if
1206	end sub
1207
1208	''
1209	' Checks if the specified path points to an usable MinGW or not.
1210	function CheckForMingWSub(strPathMingW, strPathW32API)
1211	g_strSubOutput = ""
1212	if strPathW32API = "" then strPathW32API = strPathMingW
1213	LogPrint "trying: strPathMingW=" &strPathMingW & " strPathW32API=" & strPathW32API
1214
1215	if LogFileExists(strPathMingW, "bin/mingw32-gcc.exe") _
1216	And LogFileExists(strPathMingW, "bin/ld.exe") _
1217	And LogFileExists(strPathMingW, "bin/objdump.exe") _
1218	And LogFileExists(strPathMingW, "bin/dllwrap.exe") _
1219	And LogFileExists(strPathMingW, "bin/as.exe") _
1220	And LogFileExists(strPathMingW, "include/string.h") _
1221	And LogFileExists(strPathMingW, "include/_mingw.h") _
1222	And LogFileExists(strPathMingW, "lib/dllcrt1.o") _
1223	And LogFileExists(strPathMingW, "lib/dllcrt2.o") _
1224	And LogFileExists(strPathMingW, "lib/libmsvcrt.a") _
1225	_
1226	And LogFileExists(strPathW32API, "lib/libkernel32.a") _
1227	And LogFileExists(strPathW32API, "include/windows.h") _
1228	then
1229	if Shell(DosSlashes(strPathMingW & "/bin/gcc.exe") & " --version", True) = 0 then
1230	dim offVer, iMajor, iMinor, iPatch, strVer
1231
1232	' extract the version.
1233	strVer = ""
1234	offVer = InStr(1, g_strShellOutput, "(GCC) ")
1235	if offVer > 0 then
1236	strVer = LTrim(Mid(g_strShellOutput, offVer + Len("(GCC) ")))
1237	strVer = RTrim(Left(strVer, InStr(1, strVer, " ")))
1238	if (Mid(strVer, 2, 1) = ".") _
1239	And (Mid(strVer, 4, 1) = ".") then
1240	iMajor = Int(Left(strVer, 1)) ' Is Int() the right thing here? I want atoi()!!!
1241	iMinor = Int(Mid(strVer, 3, 1))
1242	iPatch = Int(Mid(strVer, 5))
1243	else
1244	LogPrint "Malformed version: '" & strVer & "'"
1245	strVer = ""
1246	end if
1247	end if
1248	if strVer <> "" then
1249	if (iMajor = 3) And (iMinor = 3) then
1250	CheckForMingWSub = True
1251	g_strSubOutput = strVer
1252	else
1253	LogPrint "MinGW version '" & iMajor & "." & iMinor & "." & iPatch & "' is not supported (or configure.vbs failed to parse it correctly)."
1254	end if
1255	else
1256	LogPrint "Couldn't locate the GCC version in the output!"
1257	end if
1258
1259	else
1260	LogPrint "Failed to run gcc.exe!"
1261	end if
1262	end if
1263	end function
1264
1265
1266	''
1267	' Checks for any libSDL binaries.
1268	sub CheckForlibSDL(strOptlibSDL)
1269	dim strPathlibSDL, str
1270	PrintHdr "libSDL"
1271
1272	'
1273	' Try find some SDL library.
1274	'
1275
1276	' First, the specific location.
1277	strPathlibSDL = ""
1278	if (strPathlibSDL = "") And (strOptlibSDL <> "") then
1279	if CheckForlibSDLSub(strOptlibSDL) then strPathlibSDL = strOptlibSDL
1280	end if
1281
1282	' The tools location.
1283	if strPathlibSDL = "" Then
1284	str = g_strPathDev & "/win.x86/libsdl/v1.2.11"
1285	if CheckForlibSDLSub(str) then strPathlibSDL = str
1286	end if
1287
1288	if strPathlibSDL = "" Then
1289	str = g_strPathDev & "/win.x86/libsdl/v1.2.7-InnoTek"
1290	if CheckForlibSDLSub(str) then strPathlibSDL = str
1291	end if
1292
1293	' Poke about in the path.
1294	str = Which("SDLmain.lib")
1295	if (strPathlibSDL = "") And (str <> "") Then
1296	str = PathParent(PathStripFilename(str))
1297	if CheckForlibSDLSub(str) then strPathlibSDL = str
1298	end if
1299
1300	str = Which("SDL.dll")
1301	if (strPathlibSDL = "") And (str <> "") Then
1302	str = PathParent(PathStripFilename(str))
1303	if CheckForlibSDLSub(str) then strPathlibSDL = str
1304	end if
1305
1306	' Success?
1307	if strPathlibSDL = "" then
1308	if strOptlibSDL = "" then
1309	MsgError "Can't locate libSDL. Try specify the path with the --with-libSDL=<path> argument. " _
1310	& "If still no luck, consult the configure.log and the build requirements."
1311	else
1312	MsgError "Can't locate libSDL. Please consult the configure.log and the build requirements."
1313	end if
1314	exit sub
1315	end if
1316
1317	strPathLibSDL = UnixSlashes(PathAbs(strPathLibSDL))
1318	CfgPrint "PATH_SDK_LIBSDL := " & strPathlibSDL
1319
1320	PrintResult "libSDL", strPathlibSDL
1321	end sub
1322
1323	''
1324	' Checks if the specified path points to an usable libSDL or not.
1325	function CheckForlibSDLSub(strPathlibSDL)
1326	CheckForlibSDLSub = False
1327	LogPrint "trying: strPathlibSDL=" & strPathlibSDL
1328	if LogFileExists(strPathlibSDL, "lib/SDL.lib") _
1329	And LogFileExists(strPathlibSDL, "lib/SDLmain.lib") _
1330	And LogFileExists(strPathlibSDL, "lib/SDL.dll") _
1331	And LogFileExists(strPathlibSDL, "include/SDL.h") _
1332	And LogFileExists(strPathlibSDL, "include/SDL_syswm.h") _
1333	And LogFileExists(strPathlibSDL, "include/SDL_version.h") _
1334	then
1335	CheckForlibSDLSub = True
1336	end if
1337	end function
1338
1339
1340	dim g_strXercesVer
1341	g_strXercesVer = ""
1342
1343	''
1344	' Checks for xerces.
1345	sub CheckForXerces(strOptXerces)
1346	dim strPathXerces, str
1347	PrintHdr "Xerces"
1348
1349	' Skip if no COM/ATL.
1350	if g_blnDisableCOM then
1351	PrintResult "Xerces", "Skipped (" & g_strDisableCOM & ")"
1352	exit sub
1353	end if
1354
1355	'
1356	' Try find some xerces dll/lib.
1357	'
1358	strPathXerces = ""
1359	if (strPathXerces = "") And (strOptXerces <> "") then
1360	if CheckForXercesSub(strOptXerces) then strPathXerces = strOptXerces
1361	end if
1362
1363	if strPathXerces = "" Then
1364	str = Which("xerces-c_2_9.lib")
1365	if str = "" then str = Which("xerces-c_2_8.lib")
1366	if str = "" then str = Which("xerces-c_2_7.lib")
1367	if str = "" then str = Which("xerces-c_2_6.lib")
1368	if str <> "" Then
1369	str = PathParent(PathStripFilename(str))
1370	if CheckForXercesSub(str) then strPathXerces = str
1371	end if
1372	end if
1373
1374	if strPathXerces = "" Then
1375	str = Which("xerces-c_2_9.dll")
1376	if str = "" then str = Which("xerces-c_2_8.dll")
1377	if str = "" then str = Which("xerces-c_2_7.dll")
1378	if str = "" then str = Which("xerces-c_2_6.dll")
1379	if str <> "" Then
1380	str = PathParent(PathStripFilename(str))
1381	if CheckForXercesSub(str) then strPathXerces = str
1382	end if
1383	end if
1384
1385	' Ignore failure if we're in 'internal' mode.
1386	if (strPathXerces = "") and g_blnInternalMode then
1387	PrintResult "Xerces", "ignored (internal mode)"
1388	exit sub
1389	end if
1390
1391	' Success?
1392	if strPathXerces = "" then
1393	if strOptXerces = "" then
1394	MsgError "Can't locate Xerces. Try specify the path with the --with-xerces=<path> argument. " _
1395	& "If still no luck, consult the configure.log and the build requirements."
1396	else
1397	MsgError "Can't locate Xerces. Please consult the configure.log and the build requirements."
1398	end if
1399	exit sub
1400	end if
1401
1402	strPathXerces = UnixSlashes(PathAbs(strPathXerces))
1403	CfgPrint "SDK_VBOX_XERCES_INCS := " & strPathXerces & "/include"
1404	CfgPrint "SDK_VBOX_XERCES_LIBS := " & strPathXerces & "/lib/xerces-c_" & Left(g_strXercesVer, 1) & ".lib"
1405	CfgPrint "DLL_SDK_VBOX_XERCES_XERCES := " & strPathXerces & "/bin/xerces-c_" & g_strXercesVer & ".dll"
1406
1407	PrintResult "Xerces", strPathXerces
1408	end sub
1409
1410	''
1411	' Checks if the specified path points to an usable libSDL or not.
1412	function CheckForXercesSub(strPathXerces)
1413	dim str
1414
1415	CheckForXercersSub = False
1416	LogPrint "trying: strPathXerces=" & strPathXerces
1417	if LogFileExists(strPathXerces, "include/xercesc/dom/DOM.hpp") _
1418	And LogFileExists(strPathXerces, "include/xercesc/validators/datatype/DatatypeValidator.hpp") _
1419	then
1420	' The version is encoded in the dll/lib name, so try first
1421	' to find the dll and then a matching lib.
1422	str = LogFindFile(strPathXerces, "bin/xerces-c_*.dll")
1423	if str <> "" then
1424	g_strXercesVer = Mid(str, Len("xerces-c_") + 1, Len(str) - Len("xerces-c_.dll"))
1425	' the library omits the minor version (in the current distro).
1426	if LogFileExists(strPathXerces, "lib/xerces-c_" & Left(g_strXercesVer, 1) & ".lib") then
1427	CheckForXercesSub = True
1428	end if
1429	end if
1430	end if
1431	end function
1432
1433
1434	dim g_strXalanVer
1435	g_strXalanVer = ""
1436
1437	''
1438	' Checks for Xalan.
1439	sub CheckForXalan(strOptXalan)
1440	dim strPathXalan, str
1441	PrintHdr "Xalan"
1442
1443	' Skip if no COM/ATL.
1444	if g_blnDisableCOM then
1445	PrintResult "Xalan", "Skipped (" & g_strDisableCOM & ")"
1446	exit sub
1447	end if
1448
1449	'
1450	' Try find some Xalan dll/lib.
1451	'
1452	strPathXalan = ""
1453	if (strPathXalan = "") And (strOptXalan <> "") then
1454	if CheckForXalanSub(strOptXalan) then strPathXalan = strOptXalan
1455	end if
1456
1457	if strPathXalan = "" Then
1458	str = Which("Xalan-c_1_12.lib")
1459	if str = "" then str = Which("Xalan-c_1_11.lib")
1460	if str = "" then str = Which("Xalan-c_1_10.lib")
1461	if str = "" then str = Which("Xalan-c_1_9.lib")
1462	if str <> "" Then
1463	str = PathParent(PathStripFilename(str))
1464	if CheckForXalanSub(str) then strPathXalan = str
1465	end if
1466	end if
1467
1468	if strPathXalan = "" Then
1469	str = Which("Xalan-c_1_12.dll")
1470	if str = "" then str = Which("Xalan-c_1_11.dll")
1471	if str = "" then str = Which("Xalan-c_1_10.dll")
1472	if str = "" then str = Which("Xalan-c_1_9.dll")
1473	if str <> "" Then
1474	str = PathParent(PathStripFilename(str))
1475	if CheckForXalanSub(str) then strPathXalan = str
1476	end if
1477	end if
1478
1479	' Ignore failure if we're in 'internal' mode.
1480	if (strPathXalan = "") and g_blnInternalMode then
1481	PrintResult "Xalan", "ignored (internal mode)"
1482	exit sub
1483	end if
1484
1485	' Success?
1486	if strPathXalan = "" then
1487	if strOptXalan = "" then
1488	MsgError "Can't locate Xalan. Try specify the path with the --with-Xalan=<path> argument. " _
1489	& "If still no luck, consult the configure.log and the build requirements."
1490	else
1491	MsgError "Can't locate Xalan. Please consult the configure.log and the build requirements."
1492	end if
1493	exit sub
1494	end if
1495
1496	strPathXalan = UnixSlashes(PathAbs(strPathXalan))
1497	CfgPrint "SDK_VBOX_XALAN_INCS := " & strPathXalan & "/include"
1498	CfgPrint "SDK_VBOX_XALAN_LIBS := " & strPathXalan & "/lib/Xalan-C_" & Left(g_strXalanVer, 1) & ".lib"
1499	CfgPrint "DLL_SDK_VBOX_XALAN_XALAN := " & strPathXalan & "/bin/Xalan-C_" & g_strXalanVer & ".dll"
1500	CfgPrint "DLL_SDK_VBOX_XALAN_XALAN-MESSAGES := " & strPathXalan & "/bin/XalanMessages_" & g_strXalanVer & ".dll"
1501
1502	PrintResult "Xalan", strPathXalan
1503	end sub
1504
1505	''
1506	' Checks if the specified path points to an usable Xalan or not.
1507	function CheckForXalanSub(strPathXalan)
1508	dim str
1509
1510	CheckForXercersSub = False
1511	LogPrint "trying: strPathXalan=" & strPathXalan
1512
1513	if LogFileExists(strPathXalan, "include/xalanc/DOMSupport/DOMSupport.hpp") _
1514	And LogFileExists(strPathXalan, "include/xalanc/XalanDOM/XalanText.hpp") _
1515	then
1516	' The version is encoded in the dll/lib name, so try first
1517	' to find the dll and then a matching lib.
1518	str = LogFindFile(strPathXalan, "bin/Xalan-C_*.dll")
1519	if str <> "" then
1520	g_strXalanVer = Mid(str, Len("Xalan-C_") + 1, Len(str) - Len("Xalan-C_.dll"))
1521	' the library omits the minor version (in the current distro).
1522	if LogFileExists(strPathXalan, "bin/XalanMessages_" & g_strXalanVer & ".dll") _
1523	And LogFileExists(strPathXalan, "lib/Xalan-C_" & Left(g_strXalanVer, 1) & ".lib") _
1524	then
1525	CheckForXalanSub = True
1526	end if
1527	end if
1528	end if
1529	end function
1530
1531
1532	dim g_strQtVer
1533	g_strQtVer = ""
1534
1535	''
1536	' Checks for any Qt binaries. Failure here isn't fatal.
1537	sub CheckForQt(strOptQt)
1538	dim strPathQt, str
1539
1540	PrintHdr "Qt"
1541
1542	'
1543	' Try find the Qt installation.
1544	'
1545	strPathQt = ""
1546
1547	if (strPathQt = "") And (strOptQt <> "") then
1548	if CheckForQtSub(strOptQt) then strPathQt = strOptQt
1549	end if
1550
1551	if strPathQt = "" then
1552	str = g_strPathDev & "/win.x86/qt/v3.3.3"
1553	if CheckForQtSub(str) then strPathQt = str
1554	end if
1555
1556	'' @todo check for Qt installations and stuff later.
1557
1558	' Found anything?
1559	if strPathQt = "" then
1560	CfgPrint "VBOX_WITH_QTGUI="
1561	PrintResult "Qt", "not found"
1562	else
1563	CfgPrint "VBOX_PATH_QT := " & strPathQt
1564	CfgPrint "QTDIR = $(VBOX_PATH_QT)"
1565	CfgPrint "LIB_QT = $(VBOX_PATH_QT)/lib/dynamic/qt-mt" & g_strQtVer & ".lib"
1566	CfgPrint "VBOX_DLL_QT = $(VBOX_PATH_QT)/bin/qt-mt" & g_strQtVer & ".dll"
1567	PrintResult "Qt (" & g_strQtVer & ")", strPathQt
1568	end if
1569	end sub
1570
1571	''
1572	' Checks if the specified path points to an usable Qt install or not.
1573	function CheckForQtSub(strPathQt)
1574
1575	CheckForQtSub = False
1576	LogPrint "trying: strPathQt=" & strPathQt
1577	if LogFileExists(strPathQt, "bin/moc.exe") _
1578	And LogFileExists(strPathQt, "bin/uic.exe") _
1579	And LogFileExists(strPathQt, "include/qvbox.h") _
1580	And LogFileExists(strPathQt, "include/qt_windows.h") _
1581	And LogFileExists(strPathQt, "include/qapplication.h") _
1582	And LogFileExists(strPathQt, "include/qtextedit.h") _
1583	And LogFileExists(strPathQt, "lib/dynamic/qtmain.lib") _
1584	then
1585	dim str
1586
1587	' This check might need improving.
1588	str = LogFindFile(strPathQt, "lib/dynamic/qt-mt33*.lib")
1589	if str <> "" then
1590	g_strQtVer = Mid(str, Len("qt-mt") + 1, Len(str) - Len("qt-mt.lib"))
1591	if LogFileExists(strPathQt, "bin/qt-mt" & g_strQtVer & ".dll") then
1592	CheckForQtSub = True
1593	end if
1594	end if
1595	end if
1596	end function
1597
1598
1599	''
1600	' Show usage.
1601	sub usage
1602	Print "Usage: cscript configure.vbs [options]"
1603	Print ""
1604	Print "Configuration:"
1605	Print " -h, --help"
1606	Print " --internal"
1607	Print ""
1608	Print "Components:"
1609	Print " --disable-COM"
1610	Print ""
1611	Print "Locations:"
1612	Print " --with-DDK=PATH "
1613	Print " --with-DXSDK=PATH "
1614	Print " --with-kBuild=PATH "
1615	Print " --with-libSDL=PATH "
1616	Print " --with-MinGW=PATH "
1617	Print " --with-Qt3=PATH "
1618	Print " --with-SDK=PATH "
1619	Print " --with-VC=PATH "
1620	Print " --with-VC-Common=PATH "
1621	Print " --with-VC-Express-Edition"
1622	Print " --with-W32API=PATH "
1623	Print " --with-Xalan=PATH "
1624	Print " --with-Xerces=PATH "
1625	end sub
1626
1627	''
1628	' The main() like function.
1629	'
1630	Sub Main
1631	'
1632	' Write the log header and check that we're not using wscript.
1633	'
1634	LogInit
1635	If UCase(Right(Wscript.FullName, 11)) = "WSCRIPT.EXE" Then
1636	Wscript.Echo "This script must be run under CScript."
1637	Wscript.Quit(1)
1638	End If
1639
1640	'
1641	' Parse arguments.
1642	'
1643	strOptDDK = ""
1644	strOptDXDDK = ""
1645	strOptkBuild = ""
1646	strOptlibSDL = ""
1647	strOptMingW = ""
1648	strOptQt = ""
1649	strOptSDK = ""
1650	strOptVC = ""
1651	strOptVCCommon = ""
1652	blnOptVCExpressEdition = False
1653	strOptW32API = ""
1654	blnOptXalan = ""
1655	blnOptXerces = ""
1656	blnOptDisableCOM = False
1657	for i = 1 to Wscript.Arguments.Count
1658	dim str, strArg, strPath
1659
1660	' Separate argument and path value
1661	str = Wscript.Arguments.item(i - 1)
1662	if InStr(1, str, "=") > 0 then
1663	strArg = Mid(str, 1, InStr(1, str, "=") - 1)
1664	strPath = Mid(str, InStr(1, str, "=") + 1)
1665	if strPath = "" then MsgFatal "Syntax error! Argument #" & i & " is missing the path."
1666	else
1667	strArg = str
1668	strPath = ""
1669	end if
1670
1671	' Process the argument
1672	select case LCase(strArg)
1673	case "--with-ddk"
1674	strOptDDK = strPath
1675	case "--with-dxsdk"
1676	strOptDXSDK = strPath
1677	case "--with-kbuild"
1678	strOptkBuild = strPath
1679	case "--with-libsdl"
1680	strOptlibSDL = strPath
1681	case "--with-mingw"
1682	strOptMingW = strPath
1683	case "--with-qt"
1684	strOptQt = strPath
1685	case "--with-sdk"
1686	strOptSDK = strPath
1687	case "--with-vc"
1688	strOptVC = strPath
1689	case "--with-vc-common"
1690	strOptVCCommon = strPath
1691	case "--with-vc-express-edition"
1692	blnOptVCExpressEdition = True
1693	case "--with-w32api"
1694	strOptW32API = strPath
1695	case "--with-xalan"
1696	strOptXalan = strPath
1697	case "--with-xerces"
1698	strOptXerces = strPath
1699	case "--disable-com"
1700	blnOptDisableCOM = True
1701	case "--enable-com"
1702	blnOptDisableCOM = False
1703	case "--internal"
1704	g_blnInternalMode = True
1705	case "-h", "--help", "-?"
1706	usage
1707	Wscript.Quit(0)
1708	case else
1709	Wscript.echo "syntax error: Unknown option '" & str &"'."
1710	usage
1711	Wscript.Quit(1)
1712	end select
1713	next
1714
1715	'
1716	' Initialize output files.
1717	'
1718	CfgInit
1719	EnvInit
1720
1721	'
1722	' Check that the Shell function is sane.
1723	'
1724	g_objShell.Environment("PROCESS")("TESTING_ENVIRONMENT_INHERITANCE") = "This works"
1725	if Shell("set TESTING_ENVIRONMENT_INHERITANC", False) <> 0 then ' The 'E' is missing on purpose (4nt).
1726	MsgFatal "shell execution test failed!"
1727	end if
1728	if g_strShellOutput <> "TESTING_ENVIRONMENT_INHERITANCE=This works" & CHR(13) & CHR(10) then
1729	MsgFatal "shell inheritance or shell execution isn't working right."
1730	end if
1731	g_objShell.Environment("PROCESS")("TESTING_ENVIRONMENT_INHERITANCE") = ""
1732	Print "Shell inheritance test: OK"
1733
1734	'
1735	' Do the checks.
1736	'
1737	if blnOptDisableCOM = True then
1738	DisableCOM "--disable-com"
1739	end if
1740	CheckSourcePath
1741	CheckForkBuild strOptkBuild
1742	CheckForVisualCPP strOptVC, strOptVCCommon, blnOptVCExpressEdition
1743	CheckForPlatformSDK strOptSDK
1744	CheckForWin2k3DDK strOptDDK
1745	CheckForDirectXSDK strOptDXSDK
1746	CheckForMingW strOptMingw, strOptW32API
1747	CheckForlibSDL strOptlibSDL
1748	CheckForXerces strOptXerces
1749	CheckForXalan strOptXalan
1750	CheckForQt strOptQt
1751	if g_blnInternalMode then
1752	EnvPrint "call " & g_strPathDev & "/env.cmd %1 %2 %3 %4 %5 %6 %7 %8 %9"
1753	end if
1754
1755	End Sub
1756
1757
1758	Main
1759

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format