| 1 | # $Id: Makefile.kmk 19275 2009-04-30 14:39:39Z vboxsync $
|
|---|
| 2 | ## @file
|
|---|
| 3 | # Top level makefile.
|
|---|
| 4 | #
|
|---|
| 5 |
|
|---|
| 6 | #
|
|---|
| 7 | # Copyright (C) 2006-2007 Sun Microsystems, Inc.
|
|---|
| 8 | #
|
|---|
| 9 | # This file is part of VirtualBox Open Source Edition (OSE), as
|
|---|
| 10 | # available from http://www.virtualbox.org. This file is free software;
|
|---|
| 11 | # you can redistribute it and/or modify it under the terms of the GNU
|
|---|
| 12 | # General Public License (GPL) as published by the Free Software
|
|---|
| 13 | # Foundation, in version 2 as it comes in the "COPYING" file of the
|
|---|
| 14 | # VirtualBox OSE distribution. VirtualBox OSE is distributed in the
|
|---|
| 15 | # hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
|
|---|
| 16 | #
|
|---|
| 17 | # Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa
|
|---|
| 18 | # Clara, CA 95054 USA or visit http://www.sun.com if you need
|
|---|
| 19 | # additional information or have any questions.
|
|---|
| 20 | #
|
|---|
| 21 |
|
|---|
| 22 | SUB_DEPTH = .
|
|---|
| 23 | include $(KBUILD_PATH)/subheader.kmk
|
|---|
| 24 |
|
|---|
| 25 | #
|
|---|
| 26 | # Sub-makefiles / Sub-directories.
|
|---|
| 27 | #
|
|---|
| 28 | ifdef VBOX_SINGLE_MAKEFILE
|
|---|
| 29 | if defined(VBOX_WITH_DOCS) && !defined(VBOX_ONLY_ADDITIONS)
|
|---|
| 30 | include $(PATH_SUB_CURRENT)/doc/manual/Makefile.kmk
|
|---|
| 31 | endif
|
|---|
| 32 | include $(PATH_SUB_CURRENT)/src/Makefile.kmk
|
|---|
| 33 | else
|
|---|
| 34 | if defined(VBOX_WITH_DOCS) && !defined(VBOX_ONLY_ADDITIONS)
|
|---|
| 35 | SUBDIRS = doc/manual
|
|---|
| 36 | endif
|
|---|
| 37 | SUBDIRS += src
|
|---|
| 38 | endif
|
|---|
| 39 |
|
|---|
| 40 |
|
|---|
| 41 | #
|
|---|
| 42 | # Clean up global stuff that Config.kmk generates.
|
|---|
| 43 | #
|
|---|
| 44 | OTHER_CLEAN += \
|
|---|
| 45 | $(VBOX_PACKAGE_HEADER) \
|
|---|
| 46 | $(VBOX_LICENSE_VER_KMK) \
|
|---|
| 47 | $(VBOX_VERSION_MK) \
|
|---|
| 48 | $(VBOX_VERSION_HEADER) \
|
|---|
| 49 | $(VBOX_VERSION_STAMP) \
|
|---|
| 50 | $(wildcard $(PATH_OUT)/version-stamp-*.*.*) \
|
|---|
| 51 | $(VBOX_SVN_REV_KMK).ts \
|
|---|
| 52 | $(VBOX_SVN_REV_KMK) \
|
|---|
| 53 | $(PATH_OUT)/GCCConfig.kmk
|
|---|
| 54 |
|
|---|
| 55 |
|
|---|
| 56 | ifndef VBOX_ONLY_DOCS
|
|---|
| 57 | ifndef VBOX_ONLY_ADDITIONS
|
|---|
| 58 |
|
|---|
| 59 | ifndef VBOX_OSE
|
|---|
| 60 | #
|
|---|
| 61 | # Install the license (and misc non-executable stuff).
|
|---|
| 62 | #
|
|---|
| 63 | INSTALLS += nobin
|
|---|
| 64 | nobin_INST = $(INST_BIN)
|
|---|
| 65 | nobin_MODE = 0644
|
|---|
| 66 | nobin_SOURCES =
|
|---|
| 67 | ifdef VBOX_LICENSE_FILES
|
|---|
| 68 | nobin_SOURCES += \
|
|---|
| 69 | $(VBOX_BRAND_LICENSE_HTML)=>License-$(VBOX_LICENSE_VER).html \
|
|---|
| 70 | $(foreach f,$(VBOX_INSTALLER_ADD_LANGUAGES),$(VBOX_BRAND_$(f)_LICENSE_HTML)=>License-$(VBOX_LICENSE_VER)-$(f).html)
|
|---|
| 71 | endif
|
|---|
| 72 | endif # !OSE
|
|---|
| 73 |
|
|---|
| 74 |
|
|---|
| 75 | #
|
|---|
| 76 | # Install external binaries (mostly redistributable parts of tools we use).
|
|---|
| 77 | # This must be done *before* we build the manual.
|
|---|
| 78 | #
|
|---|
| 79 | # To avoid dragging in unnecessary tools and sdks here, we don't use the .win
|
|---|
| 80 | # and .linux property suffixes.
|
|---|
| 81 | #
|
|---|
| 82 | INSTALLS += bin
|
|---|
| 83 |
|
|---|
| 84 | bin_INST = $(INST_BIN)
|
|---|
| 85 |
|
|---|
| 86 | # The SDL DLLs
|
|---|
| 87 | if1of ($(KBUILD_TARGET), win os2)
|
|---|
| 88 | ifneq ($(VBOX_WITH_VBOXSDL)$(VBOX_WITH_VBOXBFE),)
|
|---|
| 89 | include $(KBUILD_PATH)/sdks/LIBSDL.kmk
|
|---|
| 90 | bin_SOURCES += \
|
|---|
| 91 | $(DLL_SDK_LIBSDL_SDL)
|
|---|
| 92 | ifdef VBOX_WITH_SECURELABEL
|
|---|
| 93 | bin_SOURCES += \
|
|---|
| 94 | $(DLL_SDK_LIBSDL_SDLTTF)
|
|---|
| 95 | endif
|
|---|
| 96 | ifeq ($(KBUILD_TARGET),os2)
|
|---|
| 97 | bin_SOURCES += \
|
|---|
| 98 | $(DLL_SDK_LIBSDL_FSLIB)
|
|---|
| 99 | endif
|
|---|
| 100 | endif
|
|---|
| 101 | endif
|
|---|
| 102 |
|
|---|
| 103 |
|
|---|
| 104 | # The compiler runtime DLLs.
|
|---|
| 105 | ifeq ($(KBUILD_TARGET).$(VBOX_WITHOUT_COMPILER_REDIST),win.)
|
|---|
| 106 | ifdef VBOX_USE_VCC80
|
|---|
| 107 | include $(KBUILD_PATH)/tools/VCC80X86.kmk
|
|---|
| 108 | include $(KBUILD_PATH)/tools/VCC80AMD64.kmk
|
|---|
| 109 | bin_SOURCES.x86 += \
|
|---|
| 110 | $(PATH_TOOL_VCC80X86)/redist/x86/Microsoft.VC80.CRT/Microsoft.VC80.CRT.manifest=>Microsoft.VC80.CRT/Microsoft.VC80.CRT.manifest \
|
|---|
| 111 | $(PATH_TOOL_VCC80X86)/redist/x86/Microsoft.VC80.CRT/msvcr80.dll=>Microsoft.VC80.CRT/msvcr80.dll \
|
|---|
| 112 | $(PATH_TOOL_VCC80X86)/redist/x86/Microsoft.VC80.CRT/msvcp80.dll=>Microsoft.VC80.CRT/msvcp80.dll \
|
|---|
| 113 | $(PATH_TOOL_VCC80X86)/redist/x86/Microsoft.VC80.CRT/Microsoft.VC80.CRT.manifest=>testcase/Microsoft.VC80.CRT/Microsoft.VC80.CRT.manifest \
|
|---|
| 114 | $(PATH_TOOL_VCC80X86)/redist/x86/Microsoft.VC80.CRT/msvcr80.dll=>testcase/Microsoft.VC80.CRT/msvcr80.dll \
|
|---|
| 115 | $(PATH_TOOL_VCC80X86)/redist/x86/Microsoft.VC80.CRT/msvcp80.dll=>testcase/Microsoft.VC80.CRT/msvcp80.dll
|
|---|
| 116 | bin_SOURCES.amd64 += \
|
|---|
| 117 | $(PATH_TOOL_VCC80AMD64)/redist/amd64/Microsoft.VC80.CRT/Microsoft.VC80.CRT.manifest=>Microsoft.VC80.CRT/Microsoft.VC80.CRT.manifest \
|
|---|
| 118 | $(PATH_TOOL_VCC80AMD64)/redist/amd64/Microsoft.VC80.CRT/msvcr80.dll=>Microsoft.VC80.CRT/msvcr80.dll \
|
|---|
| 119 | $(PATH_TOOL_VCC80AMD64)/redist/amd64/Microsoft.VC80.CRT/msvcp80.dll=>Microsoft.VC80.CRT/msvcp80.dll \
|
|---|
| 120 | $(PATH_TOOL_VCC80AMD64)/redist/amd64/Microsoft.VC80.CRT/Microsoft.VC80.CRT.manifest=>testcase/Microsoft.VC80.CRT/Microsoft.VC80.CRT.manifest \
|
|---|
| 121 | $(PATH_TOOL_VCC80AMD64)/redist/amd64/Microsoft.VC80.CRT/msvcr80.dll=>testcase/Microsoft.VC80.CRT/msvcr80.dll \
|
|---|
| 122 | $(PATH_TOOL_VCC80AMD64)/redist/amd64/Microsoft.VC80.CRT/msvcp80.dll=>testcase/Microsoft.VC80.CRT/msvcp80.dll
|
|---|
| 123 | endif
|
|---|
| 124 | ifndef VBOX_USE_VCC80
|
|---|
| 125 | VBOX_INSTALL_VCC70_RT = 1
|
|---|
| 126 | endif
|
|---|
| 127 | ifeq ($(KBUILD_TARGET).$(KBUILD_TARGET_ARCH),win.x86)
|
|---|
| 128 | VBOX_INSTALL_VCC70_RT = 1
|
|---|
| 129 | endif
|
|---|
| 130 | ifdef VBOX_INSTALL_VCC70_RT
|
|---|
| 131 | include $(KBUILD_PATH)/tools/VCC70.kmk
|
|---|
| 132 | ## @todo Move these defines to VCC70.
|
|---|
| 133 | DLL_TOOL_VCC70_MSVCR71 ?= $(PATH_TOOL_VCC70)/bin/msvcr71.dll
|
|---|
| 134 | ifneq ($(wildcard $(DLL_TOOL_VCC70_MSVCR71)),)
|
|---|
| 135 | bin_SOURCES += \
|
|---|
| 136 | $(DLL_TOOL_VCC70_MSVCR71)=>msvcr71.dll \
|
|---|
| 137 | $(DLL_TOOL_VCC70_MSVCR71)=>testcase/msvcr71.dll
|
|---|
| 138 | endif
|
|---|
| 139 | DLL_TOOL_VCC70_MSVCP71 ?= $(PATH_TOOL_VCC70)/bin/msvcp71.dll
|
|---|
| 140 | ifneq ($(wildcard $(DLL_TOOL_VCC70_MSVCP71)),)
|
|---|
| 141 | bin_SOURCES += \
|
|---|
| 142 | $(DLL_TOOL_VCC70_MSVCP71)=>msvcp71.dll \
|
|---|
| 143 | $(DLL_TOOL_VCC70_MSVCP71)=>testcase/msvcp71.dll
|
|---|
| 144 | endif
|
|---|
| 145 | DLL_TOOL_VCC70_MSVCRT ?= $(PATH_TOOL_VCC70)/bin/msvcrt.dll
|
|---|
| 146 | ifneq ($(wildcard $(DLL_TOOL_VCC70_MSVCRT)),)
|
|---|
| 147 | bin_SOURCES += \
|
|---|
| 148 | $(DLL_TOOL_VCC70_MSVCRT)=>msvcrt.dll \
|
|---|
| 149 | $(DLL_TOOL_VCC70_MSVCRT)=>testcase/msvcrt.dll
|
|---|
| 150 | endif
|
|---|
| 151 | endif
|
|---|
| 152 | endif
|
|---|
| 153 |
|
|---|
| 154 |
|
|---|
| 155 | ifdef VBOX_WITH_QT4_SUN
|
|---|
| 156 | #
|
|---|
| 157 | # Install our Qt DLLs / Shared Objects / Frameworks.
|
|---|
| 158 | # Note: The installer fixes the darwin .dylibs when hardening is enabled.
|
|---|
| 159 | #
|
|---|
| 160 | INSTALLS += qt4-bin
|
|---|
| 161 | qt4-bin_MODE = 755
|
|---|
| 162 | ifeq ($(KBUILD_TARGET),darwin)
|
|---|
| 163 | qt4-bin_INST = $(INST_VIRTUALBOX)Contents/
|
|---|
| 164 | qt4-bin_SOURCES = $(foreach qtmod, QtCore QtGui QtNetwork \
|
|---|
| 165 | ,$(VBOX_PATH_QT4)/Frameworks/$(qtmod)VBox.framework/Versions/4/$(qtmod)VBox=>Frameworks/$(qtmod)VBox.framework/Versions/4/$(qtmod)VBox)
|
|---|
| 166 | ifdef VBOX_WITH_COCOA_QT
|
|---|
| 167 | qt4-bin_SOURCES += \
|
|---|
| 168 | $(VBOX_PATH_QT4)/Frameworks/QtGuiVBox.framework/Versions/4/Resources/qt_menu.nib/classes.nib=>Frameworks/QtGuiVBox.framework/Versions/4/Resources/qt_menu.nib/classes.nib \
|
|---|
| 169 | $(VBOX_PATH_QT4)/Frameworks/QtGuiVBox.framework/Versions/4/Resources/qt_menu.nib/info.nib=>Frameworks/QtGuiVBox.framework/Versions/4/Resources/qt_menu.nib/info.nib \
|
|---|
| 170 | $(VBOX_PATH_QT4)/Frameworks/QtGuiVBox.framework/Versions/4/Resources/qt_menu.nib/keyedobjects.nib=>Frameworks/QtGuiVBox.framework/Versions/4/Resources/qt_menu.nib/keyedobjects.nib
|
|---|
| 171 | endif
|
|---|
| 172 | qt4-bin_SOURCES += \
|
|---|
| 173 | $(VBOX_PATH_QT4)/plugins/accessible/libqtaccessiblewidgets.dylib=>MacOS/accessible/libqtaccessiblewidgets.dylib
|
|---|
| 174 | qt4-bin_SYMLINKS = $(foreach qtmod, QtCore QtGui QtNetwork \
|
|---|
| 175 | ,Frameworks/$(qtmod)VBox.framework/$(qtmod)VBox=>Versions/4/$(qtmod)VBox)
|
|---|
| 176 | ifdef VBOX_WITH_COCOA_QT
|
|---|
| 177 | qt4-bin_SYMLINKS += \
|
|---|
| 178 | Frameworks/QtGuiVBox.framework/Resources=>Versions/4/Resources/
|
|---|
| 179 | endif
|
|---|
| 180 | else ifeq ($(KBUILD_TARGET),win)
|
|---|
| 181 | qt4-bin_INST = $(INST_BIN)
|
|---|
| 182 | qt4-bin_SOURCES = \
|
|---|
| 183 | $(VBOX_PATH_QT4_LIB)/QtCoreVBox4.dll \
|
|---|
| 184 | $(VBOX_PATH_QT4_LIB)/QtGuiVBox4.dll \
|
|---|
| 185 | $(VBOX_PATH_QT4_LIB)/QtNetworkVBox4.dll \
|
|---|
| 186 | $(VBOX_PATH_QT4)/plugins/accessible/qtaccessiblewidgets4.dll=>accessible/qtaccessiblewidgets4.dll
|
|---|
| 187 | else
|
|---|
| 188 | qt4-bin_INST = $(INST_BIN)
|
|---|
| 189 | qt4-bin_SOURCES = \
|
|---|
| 190 | $(VBOX_PATH_QT4_LIB)/libQtCoreVBox.so.4 \
|
|---|
| 191 | $(VBOX_PATH_QT4_LIB)/libQtGuiVBox.so.4 \
|
|---|
| 192 | $(VBOX_PATH_QT4_LIB)/libQtNetworkVBox.so.4 \
|
|---|
| 193 | $(VBOX_PATH_QT4)/plugins/accessible/libqtaccessiblewidgets$(SUFF_DLL)=>accessible/libqtaccessiblewidgets$(SUFF_DLL)
|
|---|
| 194 | endif
|
|---|
| 195 | endif # VBOX_WITH_QT4_SUN
|
|---|
| 196 |
|
|---|
| 197 |
|
|---|
| 198 | #
|
|---|
| 199 | # For building the combined package, just get the additions .ISO
|
|---|
| 200 | # once for amd64 to prevent version inconsistences. In all other
|
|---|
| 201 | # cases we get the .ISO per target architecture.
|
|---|
| 202 | #
|
|---|
| 203 | ifdef VBOX_WITH_ADDITIONS_FROM_BUILD_SERVER
|
|---|
| 204 | ifdef VBOX_WITH_COMBINED_PACKAGE
|
|---|
| 205 | ifeq ($(KBUILD_TARGET_ARCH),amd64)
|
|---|
| 206 | INSTALLS += buildserver-additions
|
|---|
| 207 | endif
|
|---|
| 208 | else
|
|---|
| 209 | INSTALLS += buildserver-additions
|
|---|
| 210 | endif
|
|---|
| 211 |
|
|---|
| 212 | #
|
|---|
| 213 | # Install additions iso from the build server.
|
|---|
| 214 | # The $(CP)/$(RM) stuff can be replaced by a simple $(TOUCH) once that has
|
|---|
| 215 | # been added to kBuild.
|
|---|
| 216 | #
|
|---|
| 217 | buildserver-additions_INST = $(INST_ADDITIONS_ISO)
|
|---|
| 218 | buildserver-additions_MODE = 0644
|
|---|
| 219 | buildserver-additions_SOURCES = $(PATH_TARGET)/VBoxGuestAdditions.iso
|
|---|
| 220 | buildserver-additions_CLEANS = $(PATH_TARGET)/VBoxGuestAdditions.iso $(PATH_TARGET)/VBoxGuestAdditions.iso.tmp
|
|---|
| 221 |
|
|---|
| 222 | $(PATH_TARGET)/VBoxGuestAdditions.iso: $(VBOX_SVN_REV_KMK) $(PATH_DEVTOOLS)/bin/additions.sh | $$(dir $$@)
|
|---|
| 223 | $(RM) -f $(PATH_TARGET)/VBoxGuestAdditions.iso $(PATH_TARGET)/VBoxGuestAdditions.iso.tmp
|
|---|
| 224 | ifneq ($(KBUILD_HOST),win)
|
|---|
| 225 | $(SHELL) $(PATH_DEVTOOLS)/bin/additions.sh --cmd fetch --filename $(PATH_TARGET)/VBoxGuestAdditions.iso.tmp
|
|---|
| 226 | else
|
|---|
| 227 | $(KMK) --affinity 1 -f $(MAKEFILE) VBOX_SINGLE_MAKEFILE= buildserver-additions-affinity-hack
|
|---|
| 228 | endif
|
|---|
| 229 | $(CP) -f $(PATH_TARGET)/VBoxGuestAdditions.iso.tmp $(PATH_TARGET)/VBoxGuestAdditions.iso
|
|---|
| 230 | $(RM) -f $(PATH_TARGET)/VBoxGuestAdditions.iso.tmp
|
|---|
| 231 |
|
|---|
| 232 | ifeq ($(KBUILD_HOST),win)
|
|---|
| 233 | buildserver-additions-affinity-hack:
|
|---|
| 234 | $(SHELL) $(PATH_DEVTOOLS)/bin/additions.sh --cmd fetch --filename $(PATH_TARGET)/VBoxGuestAdditions.iso.tmp
|
|---|
| 235 | endif
|
|---|
| 236 | endif
|
|---|
| 237 |
|
|---|
| 238 |
|
|---|
| 239 | #
|
|---|
| 240 | #
|
|---|
| 241 | # Install documentation files (at the moment the .chm) from the build server.
|
|---|
| 242 | # The $(CP)/$(RM) stuff can be replaced by a simple $(TOUCH) once that has
|
|---|
| 243 | # been added to kBuild.
|
|---|
| 244 | #
|
|---|
| 245 | ifdef VBOX_WITH_DOCS_FROM_BUILD_SERVER
|
|---|
| 246 | ## @todo r=bird: Too much mess now for $(PATH_TARGET); move to doc/manual/.
|
|---|
| 247 | INSTALLS += buildserver-docs
|
|---|
| 248 | buildserver-docs_INST = $(INST_BIN)
|
|---|
| 249 | buildserver-docs_MODE = 0644
|
|---|
| 250 | buildserver-docs_SOURCES = \
|
|---|
| 251 | $(addprefix $(PATH_TARGET)/, \
|
|---|
| 252 | VirtualBox.chm UserManual.pdf \
|
|---|
| 253 | $(foreach f,$(VBOX_MANUAL_ADD_LANGUAGES),VirtualBox_$(f).chm UserManual_$(f).pdf))
|
|---|
| 254 | buildserver-docs_CLEANS = \
|
|---|
| 255 | $(addprefix $(PATH_TARGET)/, \
|
|---|
| 256 | VBoxDocumentation.zip VBoxDocumentation.zip.tmp \
|
|---|
| 257 | VirtualBox.chm UserManual.pdf \
|
|---|
| 258 | $(foreach f,$(VBOX_MANUAL_ADD_LANGUAGES),VirtualBox_$(f).chm UserManual_$(f).pdf))
|
|---|
| 259 |
|
|---|
| 260 | ## @todo Hack to get at TOOL_ZIP_UNPACK; see if this can be integrated somehow...
|
|---|
| 261 | include $(KBUILD_PATH)/tools/ZIP.kmk
|
|---|
| 262 |
|
|---|
| 263 | $(PATH_TARGET)/VirtualBox.chm + $(PATH_TARGET)/UserManual.pdf \
|
|---|
| 264 | $(foreach f,$(VBOX_MANUAL_ADD_LANGUAGES), + $(PATH_TARGET)/VirtualBox_$(f).chm + $(PATH_TARGET)/UserManual_$(f).pdf): \
|
|---|
| 265 | $(PATH_TARGET)/VBoxDocumentation.zip
|
|---|
| 266 | $(call MSG_L1,Unpacking documentation)
|
|---|
| 267 | $(QUIET)$(TOOL_ZIP_UNPACK) $(TOOL_ZIP_UNPACKFLAGS) -o $< -d $(PATH_TARGET)
|
|---|
| 268 |
|
|---|
| 269 | $(PATH_TARGET)/VBoxDocumentation.zip: $(VBOX_SVN_REV_KMK) $(PATH_DEVTOOLS)/bin/documentation.sh | $$(dir $$@)
|
|---|
| 270 | $(RM) -f $(PATH_TARGET)/VBoxDocumentation.zip $(PATH_TARGET)/VBoxDocumentation.zip.tmp
|
|---|
| 271 | ifneq ($(KBUILD_HOST),win)
|
|---|
| 272 | $(SHELL) $(PATH_DEVTOOLS)/bin/documentation.sh --cmd fetch --filename $(PATH_TARGET)/VBoxDocumentation.zip.tmp
|
|---|
| 273 | else
|
|---|
| 274 | $(KMK) --affinity 1 -f $(MAKEFILE) VBOX_SINGLE_MAKEFILE= buildserver-documentation-affinity-hack
|
|---|
| 275 | endif
|
|---|
| 276 | $(CP) -f $(PATH_TARGET)/VBoxDocumentation.zip.tmp $(PATH_TARGET)/VBoxDocumentation.zip
|
|---|
| 277 | $(RM) -f $(PATH_TARGET)/VBoxDocumentation.zip.tmp
|
|---|
| 278 |
|
|---|
| 279 | ifeq ($(KBUILD_HOST),win)
|
|---|
| 280 | buildserver-documentation-affinity-hack:
|
|---|
| 281 | $(SHELL) $(PATH_DEVTOOLS)/bin/documentation.sh --cmd fetch --filename $(PATH_TARGET)/VBoxDocumentation.zip.tmp
|
|---|
| 282 | endif
|
|---|
| 283 | endif # VBOX_WITH_DOCS_FROM_BUILD_SERVER
|
|---|
| 284 |
|
|---|
| 285 |
|
|---|
| 286 | #
|
|---|
| 287 | # Install staged binaries on platforms where we can't cross
|
|---|
| 288 | # compile things.
|
|---|
| 289 | #
|
|---|
| 290 | ifn1of ($(KBUILD_TARGET), l4 linux win)
|
|---|
| 291 | VBOX_PATH_STAGED ?= .
|
|---|
| 292 |
|
|---|
| 293 | # Additions.
|
|---|
| 294 | ifndef VBOX_WITH_LINUX_ADDITIONS
|
|---|
| 295 | ifndef VBOX_WITH_WIN32_ADDITIONS
|
|---|
| 296 | ifneq ($(wildcard $(VBOX_PATH_STAGED)/VBoxGuestAdditions.iso),)
|
|---|
| 297 | INSTALLS += staged-additions
|
|---|
| 298 | staged-additions_INST = $(INST_ADDITIONS_ISO)
|
|---|
| 299 | staged-additions_MODE = 0644
|
|---|
| 300 | staged-additions_SOURCES = $(VBOX_PATH_STAGED)/VBoxGuestAdditions.iso
|
|---|
| 301 | endif
|
|---|
| 302 | endif
|
|---|
| 303 | endif
|
|---|
| 304 |
|
|---|
| 305 | # guesttool.exe
|
|---|
| 306 | ifndef VBOX_WITH_WIN32_ADDITIONS
|
|---|
| 307 | ifneq ($(wildcard $(VBOX_PATH_STAGED)/guesttool.exe),)
|
|---|
| 308 | INSTALLS += staged-guesttool
|
|---|
| 309 | staged-guesttool_INST = $(INST_BIN)
|
|---|
| 310 | staged-guesttool_SOURCES = $(VBOX_PATH_STAGED)/guesttool.exe
|
|---|
| 311 | endif
|
|---|
| 312 | endif
|
|---|
| 313 |
|
|---|
| 314 | endif
|
|---|
| 315 |
|
|---|
| 316 | endif # !VBOX_ONLY_ADDITIONS
|
|---|
| 317 | endif # !VBOX_ONLY_DOCS
|
|---|
| 318 |
|
|---|
| 319 |
|
|---|
| 320 | ifdef VBOX_ONLY_DOCS
|
|---|
| 321 | # It may sound a bit odd, but for preparing the documentation package the
|
|---|
| 322 | # doxygen documentation isn't needed and increases the build time a lot.
|
|---|
| 323 | docs:
|
|---|
| 324 | else # !VBOX_ONLY_DOCS
|
|---|
| 325 | #
|
|---|
| 326 | # Generate documentation.
|
|---|
| 327 | # (This should be converted into a separate pass or merged with an existing one later.)
|
|---|
| 328 | #
|
|---|
| 329 | ifdef VBOX_SINGLE_MAKEFILE
|
|---|
| 330 | ifdef VBOX_WITH_ALL_DOXYGEN_TARGETS
|
|---|
| 331 | docs: docs.Core
|
|---|
| 332 | endif
|
|---|
| 333 | else # !VBOX_SINGLE_MAKEFILE
|
|---|
| 334 | docs: $(if $(VBOX_WITH_ALL_DOXYGEN_TARGETS),docs.Core)
|
|---|
| 335 | $(KMK) -C src/VBox/Main docs.Main
|
|---|
| 336 | ifdef VBOX_WITH_ALL_DOXYGEN_TARGETS
|
|---|
| 337 | $(KMK) -C src/VBox/Runtime docs.iprt
|
|---|
| 338 | endif
|
|---|
| 339 | endif # !VBOX_SINGLE_MAKEFILE
|
|---|
| 340 | endif # !VBOX_ONLY_DOCS
|
|---|
| 341 |
|
|---|
| 342 | docs.Core docs.core: $(PATH_TARGET)/docs.Core
|
|---|
| 343 |
|
|---|
| 344 |
|
|---|
| 345 |
|
|---|
| 346 | #
|
|---|
| 347 | # The core (VMM+REM+Devices+Main) documentation.
|
|---|
| 348 | #
|
|---|
| 349 | # This includes so much because we wish to have the complete CFGM
|
|---|
| 350 | # and GCFGM lists.
|
|---|
| 351 | #
|
|---|
| 352 | OTHER_CLEAN += \
|
|---|
| 353 | $(PATH_TARGET)/Doxyfile.Core \
|
|---|
| 354 | $(PATH_TARGET)/Doxyfile.Core.dep
|
|---|
| 355 |
|
|---|
| 356 | VBOX_CORE_DOXYFILE_INPUT_DIRS = \
|
|---|
| 357 | include/iprt \
|
|---|
| 358 | include/VBox \
|
|---|
| 359 | include/VBox/com \
|
|---|
| 360 | include/VBox/HostServices \
|
|---|
| 361 | src/VBox/VMM \
|
|---|
| 362 | src/VBox/VMM/VMMR0 \
|
|---|
| 363 | src/VBox/VMM/VMMGC \
|
|---|
| 364 | src/VBox/VMM/VMMAll \
|
|---|
| 365 | src/VBox/VMM/PATM \
|
|---|
| 366 | src/VBox/VMM/PATM/VMMR0 \
|
|---|
| 367 | src/VBox/VMM/PATM/VMMGC \
|
|---|
| 368 | src/VBox/VMM/PATM/VMMAll \
|
|---|
| 369 | src/VBox/VMM/VMMSwitcher \
|
|---|
| 370 | src/VBox/Debugger \
|
|---|
| 371 | src/VBox/Devices \
|
|---|
| 372 | src/VBox/Devices/Audio \
|
|---|
| 373 | src/VBox/Devices/Bus \
|
|---|
| 374 | src/VBox/Devices/Graphics \
|
|---|
| 375 | src/VBox/Devices/Graphics/BIOS \
|
|---|
| 376 | src/VBox/Devices/Input \
|
|---|
| 377 | src/VBox/Devices/Networking \
|
|---|
| 378 | src/VBox/Devices/PC \
|
|---|
| 379 | src/VBox/Devices/PC/BIOS \
|
|---|
| 380 | src/VBox/Devices/Parallel \
|
|---|
| 381 | src/VBox/Devices/Serial \
|
|---|
| 382 | src/VBox/Devices/Storage \
|
|---|
| 383 | src/VBox/Devices/VBoxHDDFormats \
|
|---|
| 384 | src/VBox/Devices/VBoxHDDFormats/StorageCraft \
|
|---|
| 385 | src/VBox/Devices/USB \
|
|---|
| 386 | src/VBox/Devices/USB/darwin \
|
|---|
| 387 | src/VBox/Devices/USB/linux \
|
|---|
| 388 | src/VBox/Devices/USB/os2 \
|
|---|
| 389 | src/VBox/Devices/USB/solaris \
|
|---|
| 390 | src/VBox/Devices/USB/vrdp \
|
|---|
| 391 | src/VBox/Devices/USB/win32 \
|
|---|
| 392 | src/VBox/Devices/VMMDev \
|
|---|
| 393 | src/VBox/Main/include \
|
|---|
| 394 | src/VBox/Main/include/hgcm \
|
|---|
| 395 | src/VBox/Main \
|
|---|
| 396 | src/VBox/Main/glue \
|
|---|
| 397 | src/VBox/Main/hgcm \
|
|---|
| 398 | src/VBox/Main/webservice \
|
|---|
| 399 | src/VBox/Main/xml \
|
|---|
| 400 | src/VBox/Main/darwin \
|
|---|
| 401 | src/VBox/Main/linux \
|
|---|
| 402 | src/VBox/Main/os2 \
|
|---|
| 403 | src/VBox/Main/solaris \
|
|---|
| 404 | src/VBox/Main/win \
|
|---|
| 405 | src/VBox/Main/xpcom \
|
|---|
| 406 | src/VBox/HostServices \
|
|---|
| 407 | src/VBox/HostServices/SharedClipboard \
|
|---|
| 408 | src/VBox/HostServices/SharedFolders \
|
|---|
| 409 | src/VBox/HostServices/SharedInfoServices \
|
|---|
| 410 | src/VBox/HostServices/SharedOpenGL \
|
|---|
| 411 | src/VBox/HostDrivers/Support \
|
|---|
| 412 | src/VBox/HostDrivers/Support/darwin \
|
|---|
| 413 | src/VBox/HostDrivers/Support/freebsd \
|
|---|
| 414 | src/VBox/HostDrivers/Support/l4 \
|
|---|
| 415 | src/VBox/HostDrivers/Support/linux \
|
|---|
| 416 | src/VBox/HostDrivers/Support/os2 \
|
|---|
| 417 | src/VBox/HostDrivers/Support/solaris \
|
|---|
| 418 | src/VBox/HostDrivers/Support/win \
|
|---|
| 419 | src/VBox/HostDrivers/VBoxNetFlt \
|
|---|
| 420 | src/VBox/HostDrivers/VBoxNetFlt/darwin \
|
|---|
| 421 | src/VBox/HostDrivers/VBoxNetFlt/linux \
|
|---|
| 422 | src/VBox/HostDrivers/VBoxNetFlt/solaris \
|
|---|
| 423 | src/VBox/HostDrivers/VBoxNetFlt/win \
|
|---|
| 424 | src/VBox/HostDrivers/VBoxNetNat \
|
|---|
| 425 | src/VBox/HostDrivers/VBoxNetNat/darwin \
|
|---|
| 426 | src/VBox/HostDrivers/VBoxNetNat/linux \
|
|---|
| 427 | src/VBox/HostDrivers/VBoxNetNat/solaris \
|
|---|
| 428 | src/VBox/HostDrivers/VBoxNetNat/win \
|
|---|
| 429 | src/VBox/HostDrivers/VBoxNetAdp \
|
|---|
| 430 | src/VBox/HostDrivers/VBoxNetAdp/darwin \
|
|---|
| 431 | src/VBox/HostDrivers/VBoxNetAdp/linux \
|
|---|
| 432 | src/VBox/HostDrivers/VBoxNetAdp/solaris \
|
|---|
| 433 | src/VBox/HostDrivers/VBoxNetAdp/win \
|
|---|
| 434 | src/VBox/HostDrivers/VBoxUSB \
|
|---|
| 435 | src/VBox/HostDrivers/VBoxUSB/darwin \
|
|---|
| 436 | src/VBox/HostDrivers/VBoxUSB/os2 \
|
|---|
| 437 | src/VBox/HostDrivers/VBoxUSB/solaris \
|
|---|
| 438 | src/VBox/HostDrivers/VBoxUSB/win \
|
|---|
| 439 | src/VBox/HostDrivers/VBoxUSB/win/Device \
|
|---|
| 440 | src/VBox/HostDrivers/VBoxUSB/win/Device/amd64 \
|
|---|
| 441 | src/VBox/HostDrivers/VBoxUSB/win/Device/x86 \
|
|---|
| 442 | src/VBox/HostDrivers/VBoxUSB/win/Filter \
|
|---|
| 443 | src/VBox/HostDrivers/VBoxUSB/win/Install \
|
|---|
| 444 | src/VBox/HostDrivers/VBoxUSB/win/Monitor \
|
|---|
| 445 | src/VBox/HostDrivers/VBoxUSB/win/Monitor/win32 \
|
|---|
| 446 | src/VBox/HostDrivers/VBoxUSB/win/Monitor/win64 \
|
|---|
| 447 | src/VBox/HostDrivers/VBoxUSB/win/usbd \
|
|---|
| 448 |
|
|---|
| 449 | # These must come first in order to make things look nice.
|
|---|
| 450 | VBOX_CORE_DOXYFILE_INPUT_FIRST =\
|
|---|
| 451 | $(PATH_ROOT)/doc/VBox-doc.c \
|
|---|
| 452 | $(PATH_ROOT)/doc/VBox-CodingGuidelines.cpp \
|
|---|
| 453 | $(PATH_ROOT)/doc/VBox-MakefileGuidelines.cpp \
|
|---|
| 454 | $(PATH_ROOT)/src/VBox/VMM/VMMCodingGuidelines.cpp \
|
|---|
| 455 | $(PATH_ROOT)/src/VBox/VMM/VMMDocsRawMode.cpp \
|
|---|
| 456 | $(PATH_ROOT)/include/VBox/cdefs.h \
|
|---|
| 457 | $(PATH_ROOT)/include/VBox/vmapi.h \
|
|---|
| 458 | $(PATH_ROOT)/include/VBox/vmm.h \
|
|---|
| 459 | $(PATH_ROOT)/include/VBox/cpum.h \
|
|---|
| 460 | $(PATH_ROOT)/include/VBox/mm.h \
|
|---|
| 461 | $(PATH_ROOT)/include/VBox/pgm.h \
|
|---|
| 462 | $(PATH_ROOT)/include/VBox/selm.h \
|
|---|
| 463 | $(PATH_ROOT)/include/VBox/trpm.h \
|
|---|
| 464 | $(PATH_ROOT)/include/VBox/patm.h \
|
|---|
| 465 | $(PATH_ROOT)/include/VBox/dbgf.h \
|
|---|
| 466 | $(PATH_ROOT)/include/VBox/stam.h \
|
|---|
| 467 | $(PATH_ROOT)/include/VBox/em.h \
|
|---|
| 468 | $(PATH_ROOT)/include/VBox/pdm.h \
|
|---|
| 469 | $(PATH_ROOT)/include/VBox/rem.h \
|
|---|
| 470 | $(PATH_ROOT)/include/VBox/iom.h \
|
|---|
| 471 | $(PATH_ROOT)/include/VBox/cfgm.h \
|
|---|
| 472 | $(PATH_ROOT)/include/VBox/tm.h \
|
|---|
| 473 | $(PATH_ROOT)/include/VBox/csam.h \
|
|---|
| 474 | $(PATH_ROOT)/include/VBox/ssm.h \
|
|---|
| 475 | $(PATH_ROOT)/include/VBox/hwaccm.h \
|
|---|
| 476 | $(PATH_ROOT)/include/VBox/hwacc_svm.h \
|
|---|
| 477 | $(PATH_ROOT)/include/VBox/hwacc_vmx.h \
|
|---|
| 478 | \
|
|---|
| 479 | $(PATH_ROOT)/src/VBox/VMM/CFGMInternal.h \
|
|---|
| 480 | $(PATH_ROOT)/src/VBox/VMM/CPUMInternal.h \
|
|---|
| 481 | $(PATH_ROOT)/src/VBox/VMM/DBGFInternal.h \
|
|---|
| 482 | $(PATH_ROOT)/src/VBox/VMM/EMInternal.h \
|
|---|
| 483 | $(PATH_ROOT)/src/VBox/VMM/HWACCMInternal.h \
|
|---|
| 484 | $(PATH_ROOT)/src/VBox/VMM/IOMInternal.h \
|
|---|
| 485 | $(PATH_ROOT)/src/VBox/VMM/MMInternal.h \
|
|---|
| 486 | $(PATH_ROOT)/src/VBox/VMM/PDMInternal.h \
|
|---|
| 487 | $(PATH_ROOT)/src/VBox/VMM/PGMInternal.h \
|
|---|
| 488 | $(PATH_ROOT)/src/VBox/VMM/PATM/CSAMInternal.h \
|
|---|
| 489 | $(PATH_ROOT)/src/VBox/VMM/PATM/PATMInternal.h \
|
|---|
| 490 | $(PATH_ROOT)/src/VBox/VMM/REMInternal.h \
|
|---|
| 491 | $(PATH_ROOT)/src/VBox/VMM/SELMInternal.h \
|
|---|
| 492 | $(PATH_ROOT)/src/VBox/VMM/SSMInternal.h \
|
|---|
| 493 | $(PATH_ROOT)/src/VBox/VMM/STAMInternal.h \
|
|---|
| 494 | $(PATH_ROOT)/src/VBox/VMM/TMInternal.h \
|
|---|
| 495 | $(PATH_ROOT)/src/VBox/VMM/TRPMInternal.h \
|
|---|
| 496 | $(PATH_ROOT)/src/VBox/VMM/VMInternal.h \
|
|---|
| 497 | $(PATH_ROOT)/src/VBox/VMM/VMMInternal.h \
|
|---|
| 498 | \
|
|---|
| 499 | $(PATH_ROOT)/include/VBox/vm.h \
|
|---|
| 500 | \
|
|---|
| 501 | $(PATH_ROOT)/include/VBox/sup.h \
|
|---|
| 502 | $(PATH_ROOT)/include/VBox/VBoxHDD.h \
|
|---|
| 503 | $(PATH_ROOT)/include/VBox/types.h \
|
|---|
| 504 | $(PATH_ROOT)/include/VBox/err.h \
|
|---|
| 505 | $(PATH_ROOT)/include/VBox/x86.h \
|
|---|
| 506 | $(PATH_ROOT)/include/VBox/cpumdis.h \
|
|---|
| 507 | $(PATH_ROOT)/include/VBox/dbggui.h \
|
|---|
| 508 | $(PATH_ROOT)/include/VBox/dis.h \
|
|---|
| 509 | $(PATH_ROOT)/include/VBox/disopcode.h \
|
|---|
| 510 | $(PATH_ROOT)/include/VBox/intnet.h \
|
|---|
| 511 | $(PATH_ROOT)/include/VBox/settings.h \
|
|---|
| 512 | $(PATH_ROOT)/include/VBox/pci.h \
|
|---|
| 513 | $(PATH_ROOT)/include/VBox/scsi.h \
|
|---|
| 514 | $(PATH_ROOT)/include/VBox/shflsvc.h \
|
|---|
| 515 | $(PATH_ROOT)/include/VBox/hgcmsvc.h \
|
|---|
| 516 | $(PATH_ROOT)/include/VBox/usb.h \
|
|---|
| 517 | $(PATH_ROOT)/include/VBox/vusb.h \
|
|---|
| 518 | \
|
|---|
| 519 | $(PATH_ROOT)/include/VBox/log.h \
|
|---|
| 520 | $(PATH_ROOT)/include/VBox/param.h \
|
|---|
| 521 | $(PATH_ROOT)/include/VBox/version.h
|
|---|
| 522 |
|
|---|
| 523 | VBOX_CORE_DOXYFILE_INPUT := \
|
|---|
| 524 | $(filter-out %.cpp.h, $(sort $(wildcard $(addsuffix /*.h, $(VBOX_CORE_DOXYFILE_INPUT_DIRS)))) ) \
|
|---|
| 525 | $(foreach dir, $(VBOX_CORE_DOXYFILE_INPUT_DIRS), $(wildcard $(dir)/*.cpp $(dir)/*.c $(dir)/.asm))
|
|---|
| 526 | VBOX_CORE_DOXYFILE_INPUT := \
|
|---|
| 527 | $(VBOX_CORE_DOXYFILE_INPUT_FIRST) \
|
|---|
| 528 | $(filter-out $(VBOX_CORE_DOXYFILE_INPUT_FIRST), $(VBOX_CORE_DOXYFILE_INPUT))
|
|---|
| 529 |
|
|---|
| 530 | # And some some additional stuff.
|
|---|
| 531 | VBOX_CORE_DOXYFILE_INPUT += \
|
|---|
| 532 | $(PATH_ROOT)/src/recompiler/VBoxRecompiler.c \
|
|---|
| 533 | $(PATH_ROOT)/src/recompiler/VBoxREMWrapper.cpp
|
|---|
| 534 |
|
|---|
| 535 |
|
|---|
| 536 | VBOX_CORE_DOXYFILE_OUTPUT = $(PATH_OUT)/docs/Core
|
|---|
| 537 | BLDDIRS += $(VBOX_CORE_DOXYFILE_OUTPUT)
|
|---|
| 538 |
|
|---|
| 539 | -include $(PATH_TARGET)/Doxyfile.Core.dep
|
|---|
| 540 |
|
|---|
| 541 | # Generate the Doxyfile
|
|---|
| 542 | $(PATH_TARGET)/Doxyfile.Core: Doxyfile.Core \
|
|---|
| 543 | $(comp-vars VBOX_CORE_DOXYFILE_INPUT,DOXYGEN_INPUT_PREV,FORCE) \
|
|---|
| 544 | $(comp-vars VBOX_CORE_DOXYFILE_OUTPUT,DOXYGEN_OUTPUT_PREV,FORCE) \
|
|---|
| 545 | | $$(dir $$@)
|
|---|
| 546 | $(RM) -f $@ $@.tmp $(PATH_TARGET)/Doxyfile.Core.dep
|
|---|
| 547 | $(CP) -f Doxyfile.Core $@.tmp
|
|---|
| 548 | $(APPEND) $@.tmp
|
|---|
| 549 | $(APPEND) $@.tmp "OUTPUT_DIRECTORY = $(VBOX_CORE_DOXYFILE_OUTPUT)"
|
|---|
| 550 | $(APPEND) $@.tmp "WARN_LOGFILE = $(VBOX_CORE_DOXYFILE_OUTPUT)/errors"
|
|---|
| 551 | $(APPEND) $@.tmp "INCLUDE_PATH = $(PATH_ROOT)/include $(PATH_ROOT)/src/VBox/VMM $(PATH_ROOT)/src/VBox/Main/include "
|
|---|
| 552 | $(APPEND) $@.tmp "INCLUDE_FILE_PATTERNS = *.cpp.h"
|
|---|
| 553 | $(APPEND) $@.tmp
|
|---|
| 554 | $(APPEND) $@.tmp "INPUT = $(VBOX_CORE_DOXYFILE_INPUT)"
|
|---|
| 555 | $(APPEND) $@.tmp
|
|---|
| 556 | $(APPEND) $@.tmp "PREDEFINED += $(DEFS) $(DEFS.$(KBUILD_TARGET)) $(DEFS.$(KBUILD_TARGET_ARCH)) $(ARCH_BITS_DEFS)"
|
|---|
| 557 | $(APPEND) $@.tmp "PREDEFINED += ARCH_BITS=HC_ARCH_BITS R3_ARCH_BITS=HC_ARCH_BITS R0_ARCH_BITS=HC_ARCH_BITS "
|
|---|
| 558 | $(APPEND) $@.tmp
|
|---|
| 559 | $(MV) -f $@.tmp $@
|
|---|
| 560 | @$(APPEND) $(PATH_TARGET)/Doxyfile.Core.dep "DOXYGEN_OUTPUT_PREV = $(VBOX_CORE_DOXYFILE_OUTPUT)"
|
|---|
| 561 | @$(APPEND) $(PATH_TARGET)/Doxyfile.Core.dep "DOXYGEN_INPUT_PREV = $(VBOX_CORE_DOXYFILE_INPUT)"
|
|---|
| 562 |
|
|---|
| 563 | # Do the actual job.
|
|---|
| 564 | $(PATH_TARGET)/docs.Core: $(PATH_TARGET)/Doxyfile.Core $$(VBOX_CORE_DOXYFILE_INPUT) | $(VBOX_CORE_DOXYFILE_OUTPUT)/
|
|---|
| 565 | $(RM) -f $(PATH_TARGET)/docs.Core
|
|---|
| 566 | $(RM) -Rf $(VBOX_CORE_DOXYFILE_OUTPUT)/html/
|
|---|
| 567 | doxygen $(PATH_TARGET)/Doxyfile.Core
|
|---|
| 568 | $(APPEND) $(PATH_TARGET)/docs.Core
|
|---|
| 569 |
|
|---|
| 570 |
|
|---|
| 571 |
|
|---|
| 572 | #
|
|---|
| 573 | # Build the additions, all of them.
|
|---|
| 574 | #
|
|---|
| 575 | # This is currently tailored (hardcoded) for the additions
|
|---|
| 576 | # build box. Can make it pretty and configurable later.
|
|---|
| 577 | #
|
|---|
| 578 | # The fetching must be done in serial fashion, while the building
|
|---|
| 579 | # should be more flexible wrt to -jN.
|
|---|
| 580 | #
|
|---|
| 581 | additions-fetch:
|
|---|
| 582 | + $(KMK) -C tools fetch
|
|---|
| 583 | + $(KMK) -C tools fetch KBUILD_TARGET_ARCH=amd64 KBUILD_TARGET=linux BUILD_TARGET_ARCH=amd64 BUILD_TARGET=linux
|
|---|
| 584 | + $(KMK) -C tools fetch KBUILD_TARGET_ARCH=x86 KBUILD_TARGET=linux BUILD_TARGET_ARCH=x86 BUILD_TARGET=linux
|
|---|
| 585 | # + $(KMK) -C tools fetch KBUILD_TARGET_ARCH=x86 KBUILD_TARGET=os2 BUILD_TARGET_ARCH=x86 BUILD_TARGET=os2
|
|---|
| 586 | + $(KMK) -C tools fetch KBUILD_TARGET_ARCH=amd64 KBUILD_TARGET=solaris BUILD_TARGET_ARCH=amd64 BUILD_TARGET=solaris
|
|---|
| 587 | + $(KMK) -C tools fetch KBUILD_TARGET_ARCH=x86 KBUILD_TARGET=solaris BUILD_TARGET_ARCH=x86 BUILD_TARGET=solaris
|
|---|
| 588 | + $(KMK) -C tools fetch KBUILD_TARGET_ARCH=amd64 KBUILD_TARGET=win BUILD_TARGET_ARCH=amd64 BUILD_TARGET=win
|
|---|
| 589 | + $(KMK) -C tools fetch KBUILD_TARGET_ARCH=x86 KBUILD_TARGET=win BUILD_TARGET_ARCH=x86 BUILD_TARGET=win
|
|---|
| 590 |
|
|---|
| 591 |
|
|---|
| 592 | ## @todo Currently combined solaris additions building assumes that amd64 is
|
|---|
| 593 | # built first. The windows amd64 additions need some x86 files, so don't change
|
|---|
| 594 | # the order of the windows builds.
|
|---|
| 595 | # Do not change the order of dependencies here without testing.
|
|---|
| 596 | additions-build: \
|
|---|
| 597 | additions-build-win.x86 \
|
|---|
| 598 | additions-build-win.amd64 \
|
|---|
| 599 | additions-build-solaris.amd64 \
|
|---|
| 600 | additions-build-solaris.x86 \
|
|---|
| 601 | additions-build-os2.x86 \
|
|---|
| 602 | additions-build-linux.amd64 \
|
|---|
| 603 | additions-build-linux.x86
|
|---|
| 604 |
|
|---|
| 605 | VBOX_ADDITIONS_BUILD.amd64 = VBOX_ONLY_ADDITIONS=1 VBOX_WITHOUT_ADDITIONS_ISO=1 \
|
|---|
| 606 | KBUILD_TYPE=$(KBUILD_TYPE) BUILD_TYPE=$(KBUILD_TYPE) \
|
|---|
| 607 | KBUILD_TARGET_ARCH=amd64 BUILD_TARGET_ARCH=amd64 \
|
|---|
| 608 | VBOX_SVN_REV=$(VBOX_SVN_REV) \
|
|---|
| 609 | all packing
|
|---|
| 610 |
|
|---|
| 611 | VBOX_ADDITIONS_BUILD.x86 = VBOX_ONLY_ADDITIONS=1 VBOX_WITHOUT_ADDITIONS_ISO=1 \
|
|---|
| 612 | KBUILD_TYPE=$(KBUILD_TYPE) BUILD_TYPE=$(KBUILD_TYPE) \
|
|---|
| 613 | KBUILD_TARGET_ARCH=x86 BUILD_TARGET_ARCH=x86 \
|
|---|
| 614 | VBOX_SVN_REV=$(VBOX_SVN_REV) \
|
|---|
| 615 | all packing
|
|---|
| 616 |
|
|---|
| 617 | # Automatically determine the additions build subdir name. Used for figuring
|
|---|
| 618 | # out directory names inside the additions building VMs.
|
|---|
| 619 | VBOX_ADDITIONS_BUILD_SUBDIRNAME := $(lastword $(subst /, ,$(PATH_ROOT)))
|
|---|
| 620 |
|
|---|
| 621 | VBOX_KMK_TIME = $(KBUILD_BIN_PATH)/kmk_time
|
|---|
| 622 |
|
|---|
| 623 | additions-build-win.amd64:
|
|---|
| 624 | ifeq ($(KBUILD_TARGET),win)
|
|---|
| 625 | + $(VBOX_KMK_TIME) $(KMK) $(VBOX_ADDITIONS_BUILD.amd64)
|
|---|
| 626 | else
|
|---|
| 627 | $(call MSG_L1,Building Windows/amd64 additions)
|
|---|
| 628 | $(VBOX_KMK_TIME) ssh vbox@192.168.27.5 "cd e:/$(VBOX_ADDITIONS_BUILD_SUBDIRNAME) && tools/env.sh kmk $(VBOX_ADDITIONS_BUILD.amd64)"
|
|---|
| 629 | endif
|
|---|
| 630 |
|
|---|
| 631 | additions-build-win.x86:
|
|---|
| 632 | ifeq ($(KBUILD_TARGET),win)
|
|---|
| 633 | + $(VBOX_KMK_TIME) $(KMK) $(VBOX_ADDITIONS_BUILD.x86)
|
|---|
| 634 | else
|
|---|
| 635 | $(call MSG_L1,Building Windows/x86 additions)
|
|---|
| 636 | $(VBOX_KMK_TIME) ssh vbox@192.168.27.5 " cd e:/$(VBOX_ADDITIONS_BUILD_SUBDIRNAME) && tools/env.sh kmk $(VBOX_ADDITIONS_BUILD.x86)"
|
|---|
| 637 | endif
|
|---|
| 638 |
|
|---|
| 639 | additions-build-solaris.amd64:
|
|---|
| 640 | ifeq ($(KBUILD_TARGET),solaris)
|
|---|
| 641 | + $(VBOX_KMK_TIME) $(KMK) $(VBOX_ADDITIONS_BUILD.amd64)
|
|---|
| 642 | else
|
|---|
| 643 | $(call MSG_L1,Building Solaris/amd64 additions)
|
|---|
| 644 | rsync -av --delete --delete-excluded --exclude .svn --exclude FetchDir --exclude tinderclient.log --exclude win.amd64 --exclude win.x86 . 192.168.27.4:/mnt/tinderbox/$(VBOX_ADDITIONS_BUILD_SUBDIRNAME)
|
|---|
| 645 | $(VBOX_KMK_TIME) ssh vbox@192.168.27.4 " cd /mnt/tinderbox/$(VBOX_ADDITIONS_BUILD_SUBDIRNAME) && tools/env.sh --no-wine kmk $(VBOX_ADDITIONS_BUILD.amd64) "
|
|---|
| 646 | rsync -av --delete 192.168.27.4:/mnt/tinderbox/$(VBOX_ADDITIONS_BUILD_SUBDIRNAME)/out/solaris.amd64 out/
|
|---|
| 647 | endif
|
|---|
| 648 |
|
|---|
| 649 | # ASSUMES 64-bit is built already. See @todo above.
|
|---|
| 650 | additions-build-solaris.x86:
|
|---|
| 651 | ifeq ($(KBUILD_TARGET),solaris)
|
|---|
| 652 | + $(VBOX_KMK_TIME) $(KMK) $(VBOX_ADDITIONS_BUILD.x86) VBOX_WITH_COMBINED_SOLARIS_GUEST_PACKAGE=1
|
|---|
| 653 | else
|
|---|
| 654 | $(call MSG_L1,Building Solaris/x86 additions)
|
|---|
| 655 | rsync -av --delete --delete-excluded --exclude .svn --exclude FetchDir --exclude tinderclient.log --exclude win.amd64 --exclude win.x86 . 192.168.27.4:/mnt/tinderbox/$(VBOX_ADDITIONS_BUILD_SUBDIRNAME)
|
|---|
| 656 | $(VBOX_KMK_TIME) ssh vbox@192.168.27.4 " cd /mnt/tinderbox/$(VBOX_ADDITIONS_BUILD_SUBDIRNAME) && tools/env.sh --no-wine kmk $(VBOX_ADDITIONS_BUILD.x86) VBOX_WITH_COMBINED_SOLARIS_GUEST_PACKAGE=1"
|
|---|
| 657 | rsync -av --delete 192.168.27.4:/mnt/tinderbox/$(VBOX_ADDITIONS_BUILD_SUBDIRNAME)/out/solaris.x86 out/
|
|---|
| 658 | endif
|
|---|
| 659 |
|
|---|
| 660 | additions-build-os2.x86:
|
|---|
| 661 | #ifeq ($(KBUILD_TARGET),os2)
|
|---|
| 662 | # + $(VBOX_KMK_TIME) $(KMK) $(VBOX_ADDITIONS_BUILD.x86)
|
|---|
| 663 | #else
|
|---|
| 664 | # $(VBOX_KMK_TIME) ssh vbox@192.168.27.3 " cd /mnt/tinderbox/$(VBOX_ADDITIONS_BUILD_SUBDIRNAME) && tools/env.sh --no-wine kmk $(VBOX_ADDITIONS_BUILD.x86) "
|
|---|
| 665 | #endif
|
|---|
| 666 |
|
|---|
| 667 | additions-build-linux.amd64:
|
|---|
| 668 | ifeq ($(KBUILD_TARGET).$(KBUILD_TARGET_ARCH),linux.amd64)
|
|---|
| 669 | + $(VBOX_KMK_TIME) $(KMK) $(VBOX_ADDITIONS_BUILD.amd64)
|
|---|
| 670 | else
|
|---|
| 671 | $(call MSG_L1,Building Linux/amd64 additions)
|
|---|
| 672 | $(VBOX_KMK_TIME) ssh vbox@192.168.27.12 " cd /mnt/tinderbox/$(VBOX_ADDITIONS_BUILD_SUBDIRNAME) && tools/env.sh --no-wine kmk $(VBOX_ADDITIONS_BUILD.amd64) "
|
|---|
| 673 | endif
|
|---|
| 674 |
|
|---|
| 675 | additions-build-linux.x86:
|
|---|
| 676 | ifeq ($(KBUILD_TARGET).$(KBUILD_TARGET_ARCH),linux.x86)
|
|---|
| 677 | + $(VBOX_KMK_TIME) $(KMK) $(VBOX_ADDITIONS_BUILD.x86)
|
|---|
| 678 | else
|
|---|
| 679 | $(call MSG_L1,Building Linux/x86 additions)
|
|---|
| 680 | $(VBOX_KMK_TIME) ssh vbox@192.168.27.2 " cd /mnt/tinderbox/$(VBOX_ADDITIONS_BUILD_SUBDIRNAME) && tools/env.sh --no-wine kmk $(VBOX_ADDITIONS_BUILD.x86) "
|
|---|
| 681 | endif
|
|---|
| 682 |
|
|---|
| 683 |
|
|---|
| 684 | additions-packing:
|
|---|
| 685 | + $(KMK) VBOX_ONLY_ADDITIONS=1 \
|
|---|
| 686 | VBOX_WITH_ADDITIONS_ISO.freebsd.amd64= \
|
|---|
| 687 | VBOX_WITH_ADDITIONS_ISO.freebsd.x86= \
|
|---|
| 688 | VBOX_WITH_ADDITIONS_ISO.linux.amd64=1 \
|
|---|
| 689 | VBOX_WITH_ADDITIONS_ISO.linux.x86=1 \
|
|---|
| 690 | VBOX_WITH_ADDITIONS_ISO.solaris.amd64=1 \
|
|---|
| 691 | VBOX_WITH_ADDITIONS_ISO.solaris.x86=1 \
|
|---|
| 692 | VBOX_WITH_COMBINED_SOLARIS_GUEST_PACKAGE=1 \
|
|---|
| 693 | VBOX_WITH_ADDITIONS_ISO.win.amd64=1 \
|
|---|
| 694 | VBOX_WITH_ADDITIONS_ISO.win.x86=1 \
|
|---|
| 695 | -C src/VBox/Additions \
|
|---|
| 696 | $(VBOX_PATH_ADDITIONS)/VBoxGuestAdditions.iso
|
|---|
| 697 |
|
|---|
| 698 |
|
|---|
| 699 |
|
|---|
| 700 | #
|
|---|
| 701 | # Generate VirtualBox-OSE-x.x.x.tar.bz2 (OSE) tarballs for distribution
|
|---|
| 702 | # - includes kBuild
|
|---|
| 703 | # - must be executed on an OSE checkout
|
|---|
| 704 | #
|
|---|
| 705 |
|
|---|
| 706 | # the path where to store the tarball
|
|---|
| 707 | TARBALLPATH ?= $(abspath $(PATH_ROOT)/..)
|
|---|
| 708 | # the root directory inside the tarball
|
|---|
| 709 | TARBALLROOT ?= VirtualBox-$(VBOX_VERSION_STRING)
|
|---|
| 710 | # the name of the tarball file
|
|---|
| 711 | TARBALLNAME ?= VirtualBox-$(VBOX_VERSION_STRING).tar.bz2
|
|---|
| 712 | snapshot-ose:
|
|---|
| 713 | @$(call MSG_L1,Creating tarball $(TARBALLPATH)/$(TARBALLNAME))
|
|---|
| 714 | @if [ -d "$(PATH_ROOT)/src/VBox/Devices/USB" ]; then \
|
|---|
| 715 | echo; \
|
|---|
| 716 | echo "Found USB stuff, refused to build OSE tarball!"; \
|
|---|
| 717 | echo; \
|
|---|
| 718 | exit 1; \
|
|---|
| 719 | fi; \
|
|---|
| 720 | if [ -z "$(VBOX_OSE)" ]; then \
|
|---|
| 721 | echo; \
|
|---|
| 722 | echo "Please do 'kmk snapshot-ose VBOX_OSE=1'"; \
|
|---|
| 723 | echo; \
|
|---|
| 724 | exit 1; \
|
|---|
| 725 | fi; \
|
|---|
| 726 | $(QUIET)$(MKDIR) -p $(TARBALLPATH)
|
|---|
| 727 | $(QUIET)$(RM) -f $(TARBALLPATH)/$(TARBALLROOT)
|
|---|
| 728 | $(QUIET)$(LN_SYMLINK) $(PATH_ROOT) $(TARBALLPATH)/$(TARBALLROOT)
|
|---|
| 729 | $(QUIET)tar -cjh --owner 0 --group 0 --totals \
|
|---|
| 730 | --exclude=.svn \
|
|---|
| 731 | --exclude=$(TARBALLROOT)/out \
|
|---|
| 732 | --exclude=$(TARBALLROOT)/env.sh \
|
|---|
| 733 | --exclude=$(TARBALLROOT)/configure.log \
|
|---|
| 734 | --exclude=$(TARBALLROOT)/build.log \
|
|---|
| 735 | --exclude=$(TARBALLROOT)/AutoConfig.kmk \
|
|---|
| 736 | --exclude=$(TARBALLROOT)/LocalConfig.kmk \
|
|---|
| 737 | --exclude=$(TARBALLROOT)/prebuild \
|
|---|
| 738 | -C $(TARBALLPATH) \
|
|---|
| 739 | -f $(TARBALLPATH)/$(TARBALLNAME) \
|
|---|
| 740 | $(TARBALLROOT)
|
|---|
| 741 | $(QUIET)$(RM) $(TARBALLPATH)/$(TARBALLROOT)
|
|---|
| 742 |
|
|---|
| 743 |
|
|---|
| 744 | #
|
|---|
| 745 | # Generate VirtualBox-x.x.x.tar.bz2 (PUEL) zip archives for internal use only
|
|---|
| 746 | # - includes kBuild
|
|---|
| 747 | # - must be executed on an OSE checkout
|
|---|
| 748 | #
|
|---|
| 749 |
|
|---|
| 750 | # the path where to store the zip archive
|
|---|
| 751 | ZIPPATH ?= $(abspath $(PATH_ROOT)/..)
|
|---|
| 752 | # the root directory inside the zip archive
|
|---|
| 753 | ZIPROOT ?= VirtualBox-$(VBOX_VERSION_STRING)
|
|---|
| 754 | # the name of the zip archive
|
|---|
| 755 | ZIPNAME ?= VirtualBox-$(VBOX_VERSION_STRING).zip
|
|---|
| 756 | snapshot-puel:
|
|---|
| 757 | @$(call MSG_L1,Creating zip $(ZIPPATH)/$(ZIPNAME))
|
|---|
| 758 | @if [ ! -d "$(PATH_ROOT)/src/VBox/Devices/USB" ]; then \
|
|---|
| 759 | echo; \
|
|---|
| 760 | echo "Did not find USB stuff, is this an OSE branch?"; \
|
|---|
| 761 | echo; \
|
|---|
| 762 | exit 1; \
|
|---|
| 763 | fi
|
|---|
| 764 | @if [ -z "$(PASSWORD)" ]; then \
|
|---|
| 765 | echo; \
|
|---|
| 766 | echo "Please specify a password with PASSWORD=..."; \
|
|---|
| 767 | echo; \
|
|---|
| 768 | exit 1; \
|
|---|
| 769 | fi
|
|---|
| 770 | $(QUIET)$(MKDIR) -p $(ZIPPATH)
|
|---|
| 771 | $(QUIET)$(RM) -f $(ZIPPATH)/$(ZIPROOT)
|
|---|
| 772 | $(QUIET)$(LN_SYMLINK) $(PATH_ROOT) $(ZIPPATH)/$(ZIPROOT)
|
|---|
| 773 | $(QUIET)(cd $(ZIPPATH); 7z a \
|
|---|
| 774 | -l -tzip -mmt=on -mx=7 -p$(PASSWORD) \
|
|---|
| 775 | -xr!.svn \
|
|---|
| 776 | -x!$(ZIPROOT)/out \
|
|---|
| 777 | -x!$(ZIPROOT)/env.sh \
|
|---|
| 778 | -x!$(ZIPROOT)/configure.log \
|
|---|
| 779 | -x!$(ZIPROOT)/build.log \
|
|---|
| 780 | -x!$(ZIPROOT)/AutoConfig.kmk \
|
|---|
| 781 | -x!$(ZIPROOT)/LocalConfig.kmk \
|
|---|
| 782 | -x!$(ZIPROOT)/doc/Devices \
|
|---|
| 783 | -x!$(ZIPROOT)/doc/\*pdf \
|
|---|
| 784 | -x!$(ZIPROOT)/doc/L4VM \
|
|---|
| 785 | -x!$(ZIPROOT)/doc/VMM \
|
|---|
| 786 | -x!$(ZIPROOT)/doc/licenses_old \
|
|---|
| 787 | -x!$(ZIPROOT)/doc/manual/de_DE \
|
|---|
| 788 | -x!$(ZIPROOT)/doc/manual/fr_FR \
|
|---|
| 789 | -x!$(ZIPROOT)/ChangeLog\* \
|
|---|
| 790 | -x!$(ZIPROOT)/COPYING \
|
|---|
| 791 | -x!$(ZIPROOT)/webtools \
|
|---|
| 792 | -x!$(ZIPROOT)/prebuild \
|
|---|
| 793 | -x!$(ZIPROOT)/src/tests \
|
|---|
| 794 | -x!$(ZIPROOT)/src/VBox/Artwork \
|
|---|
| 795 | -x!$(ZIPROOT)/src/VBox/Installer/AMI \
|
|---|
| 796 | -x!$(ZIPROOT)/src/VBox/Installer/Avanquest \
|
|---|
| 797 | -x!$(ZIPROOT)/src/VBox/Installer/Encore \
|
|---|
| 798 | -x!$(ZIPROOT)/src/VBox/Installer/linux/debian \
|
|---|
| 799 | -x!$(ZIPROOT)/src/VBox/Installer/linux/rpm \
|
|---|
| 800 | -x!$(ZIPROOT)/tools \
|
|---|
| 801 | $(ZIPPATH)/$(ZIPNAME) \
|
|---|
| 802 | $(ZIPROOT))
|
|---|
| 803 | $(QUIET)$(RM) $(ZIPPATH)/$(ZIPROOT)
|
|---|
| 804 |
|
|---|
| 805 |
|
|---|
| 806 | #
|
|---|
| 807 | # Generate ALL the rules.
|
|---|
| 808 | #
|
|---|
| 809 | include $(KBUILD_PATH)/subfooter.kmk
|
|---|
| 810 |
|
|---|
| 811 |
|
|---|
| 812 | #
|
|---|
| 813 | # Generate x86.mac and err.mac.
|
|---|
| 814 | #
|
|---|
| 815 | incs:
|
|---|
| 816 | $(SED) -f include/VBox/err.sed --output include/VBox/err.mac include/VBox/err.h
|
|---|
| 817 | $(APPEND) include/VBox/err.mac '%include "iprt/err.mac"'
|
|---|
| 818 | $(SED) -f include/VBox/err.sed --output include/iprt/err.mac include/iprt/err.h
|
|---|
| 819 | $(SED) \
|
|---|
| 820 | -e '/__VBox_x86_h__/d' \
|
|---|
| 821 | -e '/#define/!d' \
|
|---|
| 822 | -e '/\\$$/d' \
|
|---|
| 823 | -e 's/#define/%define/' \
|
|---|
| 824 | -e 's/\([0-9a-fA-F][0-9a-fA-F]*\)U$$/\1/' \
|
|---|
| 825 | -e 's/\([0-9a-fA-F][0-9a-fA-F]*\)U[[:space:]]/\1 /' \
|
|---|
| 826 | -e 's/[[:space:]]\/\*\*<.*$$//' \
|
|---|
| 827 | --output include/VBox/x86.mac \
|
|---|
| 828 | include/VBox/x86.h
|
|---|
| 829 |
|
|---|
| 830 |
|
|---|
| 831 | #
|
|---|
| 832 | # Generate Visual SlickEdit tagging #defines.
|
|---|
| 833 | #
|
|---|
| 834 | vslick.h: include/VBox/cdefs.h include/iprt/cdefs.h $(MAKEFILE)
|
|---|
| 835 | $(RM) -f -- $@ $@.tmp $@.tmp2 $@.tmp3
|
|---|
| 836 | $(APPEND) $@.tmp '// autogenerated'
|
|---|
| 837 | #@$(APPEND) $@.tmp '#define __BEGIN_DECLS '
|
|---|
| 838 | #@$(APPEND) $@.tmp '#define __END_DECLS '
|
|---|
| 839 |
|
|---|
| 840 | @$(APPEND) $@.tmp '#define ATL_NO_VTABLE '
|
|---|
| 841 | @$(APPEND) $@.tmp '#define BEGIN_COM_MAP(a) '
|
|---|
| 842 | @$(APPEND) $@.tmp '#define END_COM_MAP(a) '
|
|---|
| 843 |
|
|---|
| 844 | @$(APPEND) $@.tmp '#define CHECKREADY if(!isReady()) return E_UNEXPECTED; '
|
|---|
| 845 | @$(APPEND) $@.tmp '#define COM_DECL_READONLY_ENUM_AND_COLLECTION(a) '
|
|---|
| 846 | @$(APPEND) $@.tmp '#define COM_INTERFACE_ENTRY(a) '
|
|---|
| 847 | @$(APPEND) $@.tmp '#define COMGETTER(n) Get##n '
|
|---|
| 848 | @$(APPEND) $@.tmp '#define COMSETTER(n) Set##n '
|
|---|
| 849 | @$(APPEND) $@.tmp '#define ComSafeArrayIn(t,a) t a[] '
|
|---|
| 850 | @$(APPEND) $@.tmp '#define ComSafeArrayOut(t,a) t * a[] '
|
|---|
| 851 | @$(APPEND) $@.tmp '#define DECLARE_NOT_AGGREGATABLE(a) '
|
|---|
| 852 | @$(APPEND) $@.tmp '#define DECLARE_PROTECT_FINAL_CONSTRUCT(a) '
|
|---|
| 853 | @$(APPEND) $@.tmp '#define NS_DECL_ISUPPORTS '
|
|---|
| 854 | @$(APPEND) $@.tmp '#define NS_IMETHOD NS_IMETHOD_(nsresult) '
|
|---|
| 855 | @$(APPEND) $@.tmp '#define NS_IMETHOD_(type) type '
|
|---|
| 856 | @$(APPEND) $@.tmp '#define PARSERS_EXPORT '
|
|---|
| 857 | @$(APPEND) $@.tmp '#define STDMETHOD(a) NS_IMETHOD a '
|
|---|
| 858 |
|
|---|
| 859 | @$(APPEND) $@.tmp '#define CTX_SUFF(var) var##R3 '
|
|---|
| 860 | @$(APPEND) $@.tmp '#define CTXAllSUFF(var) var##R3 '
|
|---|
| 861 | @$(APPEND) $@.tmp '#define CTXSUFF(var) var##HC '
|
|---|
| 862 | @$(APPEND) $@.tmp '#define OTHERCTXSUFF(var) var##GC '
|
|---|
| 863 | @$(APPEND) $@.tmp '#define CTXALLMID(first, last) first##R3##last '
|
|---|
| 864 | @$(APPEND) $@.tmp '#define CTXMID(first, last) first##HC##last '
|
|---|
| 865 | @$(APPEND) $@.tmp '#define OTHERCTXMID(first, last) first##GC##last '
|
|---|
| 866 | @$(APPEND) $@.tmp '#define CTXTYPE(GCType, R3Type, R0Type) R3Type '
|
|---|
| 867 | @$(APPEND) $@.tmp '#define RCTYPE(RCType, HCType) RCType '
|
|---|
| 868 | @$(APPEND) $@.tmp '#define GCTYPE(GCType, HCType) GCType '
|
|---|
| 869 | @$(APPEND) $@.tmp '#define RCPTRTYPE(RCType) RCType '
|
|---|
| 870 | @$(APPEND) $@.tmp '#define GCPTRTYPE(GCType) GCType '
|
|---|
| 871 | @$(APPEND) $@.tmp '#define HCPTRTYPE(HCType) HCType '
|
|---|
| 872 | @$(APPEND) $@.tmp '#define R3R0PTRTYPE(HCType) HCType '
|
|---|
| 873 | @$(APPEND) $@.tmp '#define R0PTRTYPE(R3Type) R3Type '
|
|---|
| 874 | @$(APPEND) $@.tmp '#define R3PTRTYPE(R0Type) R0Type '
|
|---|
| 875 | @$(APPEND) $@.tmp '#define RT_SRC_POS __FILE__, __LINE__, __PRETTY_FUNCTION__ '
|
|---|
| 876 | @$(APPEND) $@.tmp '#define RT_SRC_POS_DECL const char *pszFile, unsigned iLine, const char *pszFunction '
|
|---|
| 877 | @$(APPEND) $@.tmp '#define RT_SRC_POS_ARGS pszFile, iLine, pszFunction '
|
|---|
| 878 | @$(APPEND) $@.tmp '#define RTCALL'
|
|---|
| 879 | @$(APPEND) $@.tmp '#define DECLINLINE(type) inline type '
|
|---|
| 880 |
|
|---|
| 881 | @$(APPEND) $@.tmp '#define PDMDEVINSINT_DECLARED 1'
|
|---|
| 882 | @$(APPEND) $@.tmp '#define VBOXCALL'
|
|---|
| 883 |
|
|---|
| 884 | $(SED) -e '/__cdecl/d' \
|
|---|
| 885 | -e '/^ *# *define.*DECL/!d' \
|
|---|
| 886 | -e '/DECLS/d' \
|
|---|
| 887 | -e '/DECLARE_CLS_/d' \
|
|---|
| 888 | -e '/_SRC_POS_DECL/d' \
|
|---|
| 889 | -e '/declspec/d' \
|
|---|
| 890 | -e '/__attribute__/d' \
|
|---|
| 891 | -e 's/# */#/g' \
|
|---|
| 892 | -e 's/ */ /g' \
|
|---|
| 893 | -e '/(type) DECLEXPORT/d' \
|
|---|
| 894 | -e '/ DECLEXPORT_CLASS/d' \
|
|---|
| 895 | -e 's/ *VBOXCALL//' \
|
|---|
| 896 | -e 's/ *RTCALL//' \
|
|---|
| 897 | -e 's/(type) DECLIMPORT(type)/(type) type/' \
|
|---|
| 898 | -e '/ DECLASM(type) type/d' \
|
|---|
| 899 | -e '/define *DECL..CALLBACKMEMBER(type[^)]*) *RT/d' \
|
|---|
| 900 | -e '/define *DECLINLINE(type)/d' \
|
|---|
| 901 | -e '/define RT[DATGRC03]*DECL(type) *DECLHIDDEN(type)/d' \
|
|---|
| 902 | \
|
|---|
| 903 | --append $@.tmp \
|
|---|
| 904 | $(filter-out include/VBox/err.h, $(wildcard include/VBox/*.h)) \
|
|---|
| 905 | include/iprt/cdefs.h
|
|---|
| 906 | $(CAT_EXT) $@.tmp | sort | $(SED_EXT) -e 's/$$/\n/' --output $@.tmp2
|
|---|
| 907 | $(MV) -f $@.tmp2 $@
|
|---|
| 908 | $(RM) -f $@.tmp $@.tmp2 $@.tmp3
|
|---|
| 909 | ifeq ($(KBUILD_HOST),win)
|
|---|
| 910 | @$(ECHO) 'TODO: Merge vslick.h with your "$(HOMEDRIVE)$(HOMEPATH)\Documents\My SlickEdit Config\x.y.z\usercpp.h" file.'
|
|---|
| 911 | else
|
|---|
| 912 | @$(ECHO) "TODO: Merge ./vslick.h with your ~/.slickedit/x.y.z/unxcpp.h file."
|
|---|
| 913 | endif
|
|---|
| 914 |
|
|---|
| 915 |
|
|---|
| 916 | #
|
|---|
| 917 | # Add fetching of the tools to the 'up[date][2]' targets.
|
|---|
| 918 | #
|
|---|
| 919 | up update up2 update2::
|
|---|
| 920 | ifndef VBOX_OSE
|
|---|
| 921 | +$(MAKE) -C tools fetch
|
|---|
| 922 | else
|
|---|
| 923 | $(MAKE) -C tools -f Makefile-ose.kmk fetch
|
|---|
| 924 | endif
|
|---|
| 925 |
|
|---|
| 926 |
|
|---|
| 927 |
|
|---|
| 928 | #
|
|---|
| 929 | # Aliases for building the SDK.
|
|---|
| 930 | #
|
|---|
| 931 | .NOTPARALLEL: sdk sdk-fetch
|
|---|
| 932 | sdk:
|
|---|
| 933 | + $(KMK) VBOX_ONLY_SDK=1 \
|
|---|
| 934 | pass_bldprogs pass_others pass_installs pass_packing
|
|---|
| 935 |
|
|---|
| 936 | sdk-fetch:
|
|---|
| 937 | + $(KMK) KBUILD_TARGET=win KBUILD_TARGET_ARCH=x86 -C tools fetch
|
|---|
| 938 |
|
|---|
| 939 |
|
|---|
