source: kBuild/branches/GNU/src/gmake/README.W32@ 280

Port of GNU make to Windows NT and Windows 95
Builds natively with MSVC 2.x or MSVC 4.x compilers.
Should also build fine with MSVC 5.x and 6.x (though not confirmed).

This Windows 32-bit port of GNU make is maintained primarily by Rob
Tulloh, who is also the author of this README.

To build with nmake on Windows NT, Windows 95, or Windows 98:

        1. Make sure cl.exe is in your %Path%. Example:

                set Path=%Path%;c:/msdev/bin

        2. Make sure %include% is set to msvc include directory. Example:

                set include=c:/msdev/include

        3. Make sure %lib% is set to msvc lib directory. Example:

                set lib=c:/msdev/lib

        4. nmake /f NMakefile


    A short cut to steps 1, 2, and 3 is to run VCVARS32.bat before
    invoking namke. For example:

        c:
        cd \msdev\bin
        VCVARS32.bat
        cd \path\to\make-3.81beta1
        nmake /f NMakefile

There is a bat file (build_w32.bat) for folks who have fear of nmake.

Outputs:

        WinDebug/make.exe
        WinRel/make.exe


-- Notes/Caveats --

GNU make on Windows 32-bit platforms:

        This version of make is ported natively to Windows32 platforms
        (Windows NT 3.51, Windows NT 4.0, Windows 95, and Windows 98). It
        does not rely on any 3rd party software or add-on packages for
        building. The only thing needed is a version of Visual C++,
        which is the predominant compiler used on Windows32 platforms.

        Do not confuse this port of GNU make with other Windows32 projects
        which provide a GNU make binary. These are separate projects
        and are not connected to this port effort.

GNU make and sh.exe:

        This port prefers you have a working sh.exe somewhere on your
        system. If you don't have sh.exe, the port falls back to
        MSDOS mode for launching programs (via a batch file).
        The MSDOS mode style execution has not been tested that
        carefully though (The author uses GNU bash as sh.exe).

        There are very few true ports of Bourne shell for NT right now.
        There is a version of GNU bash available from Cygnus "Cygwin"
        porting effort (http://sourceware.cygnus.com/cygwin).
        Other possibilities are the MKS version of sh.exe, or building
        your own with a package like NutCracker (DataFocus) or Portage
        (Consensys).

GNU make and brain-dead shells (BATCH_MODE_ONLY_SHELL):

        Some versions of Bourne shell do not behave well when invoked
        as 'sh -c' from CreateProcess().  The main problem is they seem
        to have a hard time handling quoted strings correctly. This can
        be circumvented by writing commands to be executed to a batch
        file and then executing the command by calling 'sh file'.

        To work around this difficulty, this version of make supports
        a batch mode.  When BATCH_MODE_ONLY_SHELL is defined at compile
        time, make forces all command lines to be executed via script
        files instead of by command line.  In this mode you must have a
        working sh.exe in order to use parallel builds (-j).

        A native Windows32 system with no Bourne shell will also run
        in batch mode.  All command lines will be put into batch files
        and executed via $(COMSPEC) (%COMSPEC%).  Note that parallel
        builds (-j) require a working Bourne shell; they will not work
        with COM.

GNU make and Cygnus GNU Windows32 tools:

        Good news! Make now has native support for Cygwin sh. To enable,
        define the HAVE_CYGWIN_SHELL in config.h and rebuild make
        from scratch. This version of make tested with B20.1 of Cygwin.
        Do not define BATCH_MODE_ONLY_SHELL if you use HAVE_CYGWIN_SHELL.

GNU make and the MKS shell:

        There is now semi-official support for the MKS shell. To turn this
        support on, define HAVE_MKS_SHELL in the config.h.W32 before you
        build make.  Do not define BATCH_MODE_ONLY_SHELL if you turn
        on HAVE_MKS_SHELL.

GNU make handling of drive letters in pathnames (PATH, vpath, VPATH):

        There is a caveat that should be noted with respect to handling
        single character pathnames on Windows systems.  When colon is
        used in PATH variables, make tries to be smart about knowing when
        you are using colon as a separator versus colon as a drive
        letter.  Unfortunately, something as simple as the string 'x:/'
        could be interpreted 2 ways: (x and /) or (x:/).

        Make chooses to interpret a letter plus colon (e.g. x:/) as a
        drive letter pathname.  If it is necessary to use single
        character directories in paths (VPATH, vpath, Path, PATH), the
        user must do one of two things:

         a. Use semicolon as the separator to disambiguate colon. For
            example use 'x;/' if you want to say 'x' and '/' are
            separate components.

         b. Qualify the directory name so that there is more than
            one character in the path(s) used. For example, none
            of these settings are ambiguous:

              ./x:./y
              /some/path/x:/some/path/y
              x:/some/path/x:x:/some/path/y

        Please note that you are free to mix colon and semi-colon in the
        specification of paths.  Make is able to figure out the intended
        result and convert the paths internally to the format needed
        when interacting with the operating system.

        You are encouraged to use colon as the separator character.
        This should ease the pain of deciding how to handle various path
        problems which exist between platforms.  If colon is used on
        both Unix and Windows systems, then no ifdef'ing will be
        necessary in the makefile source.

GNU make test suite:

        I verified all functionality with a slightly modified version
        of make-test-3.81beta1 (modifications to get test suite to run
        on Windows NT). All tests pass in an environment that includes
        sh.exe.  Tests were performed on both Windows NT and Windows 95.

Building GNU make on Windows NT and Windows 95/98 with Microsoft Visual C:

        I did not provide a Visual C project file with this port as
        the project file would not be considered freely distributable
        (or so I think). It is easy enough to create one, though, if
        you know how to use Visual C.

        I build the program statically to avoid problems locating DLL's
        on machines that may not have MSVC runtime installed. If you
        prefer, you can change make to build with shared libraries by
        changing /MT to /MD in the NMakefile (or in build_w32.bat).

        The program has not been built for non-Intel architectures (yet).

        I have not tried to build with any other compilers than MSVC. I
        have heard that this is possible though so don't be afraid to
        notify me of your successes!

Pathnames and white space:

        Unlike Unix, Windows 95/NT systems encourage pathnames which
        contain white space (e.g. C:\Program Files\). These sorts of pathnames
        are legal under Unix too, but are never encouraged. There is
        at least one place in make (VPATH/vpath handling) where paths
        containing white space will simply not work. There may be others
        too. I chose to not try and port make in such a way so that
        these sorts of paths could be handled. I offer these suggestions
        as workarounds:

                1. Use 8.3 notation
                2. Rename the directory so it does not contain white space.

        If you are unhappy with this choice, this is free software
        and you are free to take a crack at making this work. The code
        in w32/pathstuff.c and vpath.c would be the places to start.

Pathnames and Case insensitivity:

        Unlike Unix, Windows 95/NT systems are case insensitive but case
        preserving.  For example if you tell the file system to create a
        file named "Target", it will preserve the case.  Subsequent access to
        the file with other case permutations will succeed (i.e. opening a
        file named "target" or "TARGET" will open the file "Target").

        By default, GNU make retains its case sensitivity when comparing
        target names and existing files or directories.  It can be
        configured, however, into a case preserving and case insensitive
        mode by adding a define for HAVE_CASE_INSENSITIVE_FS to
        config.h.W32.

        For example, the following makefile will create a file named
        Target in the directory subdir which will subsequently be used
        to satisfy the dependency of SUBDIR/DepTarget on SubDir/TARGET.
        Without HAVE_CASE_INSENSITIVE_FS configured, the dependency link
        will not be made:

        subdir/Target:
                touch $@

        SUBDIR/DepTarget: SubDir/TARGET
                cp $^ $@

        Reliance on this behavior also eliminates the ability of GNU make
        to use case in comparison of matching rules.  For example, it is
        not possible to set up a C++ rule using %.C that is different
        than a C rule using %.c.  GNU make will consider these to be the
        same rule and will issue a warning.

SAMBA/NTFS/VFAT:

        I have not had any success building the debug version of this
        package using SAMBA as my file server. The reason seems to be
        related to the way VC++ 4.0 changes the case name of the pdb
        filename it is passed on the command line. It seems to change
        the name always to to lower case. I contend that
        the VC++ compiler should not change the casename of files that
        are passed as arguments on the command line. I don't think this
        was a problem in MSVC 2.x, but I know it is a problem in MSVC 4.x.

        The package builds fine on VFAT and NTFS filesystems.

        Most all of the development I have done to date has been using
        NTFS and long file names. I have not done any considerable work
        under VFAT. VFAT users may wish to be aware that this port
        of make does respect case sensitivity.

FAT:

        Version 3.76 added support for FAT filesystems. Make
        works around some difficulties with stat'ing of
        files and caching of filenames and directories internally.

Bug reports:

        Please submit bugs via the normal bug reporting mechanism which
        is described in the GNU make manual and the base README.